Analog Devices

ADSP-21567KBCZ8 800MHz SHARC+ DSP 400-Ball BGA | Analog Devices

MPN: ADSP-21567KBCZ8 ✓ Hoạt động
400-ball CSP_BGA (17 x 17 mm) Package 800 MHz Speed DDR Memory
MOQ: 1 |

ADSP-21567KBCZ8 Tóm tắt

The Analog Devices ADSP-21567KBCZ8 is a fixed- and floating-point SHARC+ digital signal processor operating at up to 800 MHz, with 640 KB of L1 memory, 512 KB of shared L2 SRAM, and a 400-ball CSP_BGA package measuring 17 x 17 mm. It combines deterministic real-time signal processing with integrated DDR support for demanding audio, automotive, communications, and industrial workloads.

A digital signal processor is a programmable semiconductor optimized to execute repetitive numerical operations with predictable latency. The SHARC+ architecture belongs to the DSP family, which sits within the broader semiconductor and embedded-processing hierarchy. Compared with a general-purpose processor executing every instruction sequentially, this DSP combines parallel arithmetic resources, dedicated memory paths, and a high-throughput floating- and fixed-point instruction set for filtering, transforms, modulation, and audio-processing workloads.

The ADSP-21567 family reaches 800 MHz and provides 640 KB of L1 SRAM plus 512 KB of shared L2 SRAM. Its DDR interface expands access to external memory for larger working sets, while integrated system peripherals reduce the need for separate interface logic. The processor supports deterministic low-latency operation, making it suitable for automotive active noise reduction, acoustic echo cancellation, voice processing, audio zoning, industrial monitoring, and communications systems.

Analog Devices describes the ADSP-2156x processors as highly deterministic, extremely low-latency platforms designed for real-time audio processing. The architecture is particularly relevant to applications requiring predictable response times, such as in-vehicle communication, engine-sound processing, road-noise cancellation, and speech enhancement. Its programmable signal-chain capabilities also support industrial vibration analysis, condition monitoring, and real-time acoustic measurement.

The 400-ball CSP_BGA package supports high-density interconnect requirements needed for processor buses, memory interfaces, clocks, serial links, and peripheral connectivity. Such a package requires careful PCB layout, controlled impedance routing, adequate via and escape-routing density, and assembly processes capable of handling the ball pitch and pad geometry. The tray packaging designation shown for this ordering code must be considered when planning production logistics and PCB population.

When designing a board around the ADSP-21567KBCZ8, treat the DDR interface as the dominant high-speed signal-integrity domain and follow the manufacturer layout guidance for length matching, layer transitions, reference planes, and power delivery. Confirm the exact DDR topology, device population rules, clock requirements, decoupling network, and exposed-pad requirements directly against the manufacturer datasheet and board-design documentation.

This product page combines the manufacturer's family-level specifications with a package-aware compatibility assessment, practical PCB and integration guidance, and an explicit separation of verified technical facts from parameters that still require schematic or board-level confirmation. That engineering context helps buyers determine whether the processor fits the required memory, clock, interface, thermal, and lifecycle needs before committing to a layout.

Bộ thay thế dễ dàng lắp đặt cho ADSP-21567KBCZ8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ADSP-21567BBCZ8

✅ Drop-In
Analog Devices
📦 400-Ball CSP_BGA (17 x 17 mm)
Fixed/Floating Point Digital Signal Processor · SHARC+ · 1 core · 800 MHz · 640 KB · 512 KB · DDR · 1.00 V

Liên hệ để biết giá

Xem tài liệu →

ADSP-21567KBCZ8 Thông số kỹ thuật

Processor Type Fixed/Floating-Point Digital Signal Processor (DSP)
Architecture SHARC+ DSP
Tần số xung maksimum 800 MHz
L1 SRAM 640 KB
Shared L2 SRAM 512 KB
External Memory Support DDR
Instruction Width 64 bit
Hộp 400-ball CSP_BGA (17 x 17 mm)
Kiểu lắp đặt Surface Mount
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân ADSP-21567KBCZ8 400-ball csp_bga (17 x 17 mm)

Cấu hình chân cho ADSP-21567KBCZ8 (400-ball csp_bga (17 x 17 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 400-ball csp_bga (17 x 17 mm) cho ADSP-21567KBCZ8

Không có dữ liệu chân cụ thể sẵn có cho ADSP-21567KBCZ8.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADSP-21567KBCZ8 phù hợp cho 6 Áp dụngs: Automotive Active Noise Cancellation, Acoustic Echo Cancellation, Voice User Interface Processing, Industrial Vibration Monitoring, Real-Time Communications, Audio Zoning and In-Car Communication.

🚗

Automotive Active Noise Cancellation

The ADSP-21567KBCZ8 fits real-time automotive noise-cancellation systems because its SHARC+ architecture runs at up to 800 MHz and includes 640 KB of L1 SRAM plus 512 KB of shared L2 SRAM. These resources support the filters, transforms, adaptive algorithms, and channel processing required to reduce road and engine noise in real time. The processor's deterministic execution behavior is valuable because acoustic control loops must respond within fixed timing windows. Use the DDR interface for larger reference-signal or multichannel buffers, while keeping latency-sensitive working data in local SRAM. Board design must also account for the 400-ball CSP_BGA footprint, controlled-impedance escape routing, and robust decoupling around the processor.

🎧

Acoustic Echo Cancellation

The ADSP-21567KBCZ8 is suitable for acoustic echo cancellation because its 800 MHz SHARC+ core can execute adaptive filters and signal-processing blocks with deterministic latency. The 640 KB of L1 SRAM and 512 KB of shared L2 SRAM provide local storage for filter state, microphone and loudspeaker reference channels, and intermediate buffers, reducing pressure on external DDR. Deploy the DDR interface when multichannel histories or larger working sets are required. Implementation should account for deterministic interrupt latency, memory bandwidth, and synchronized conversion devices. The dense 400-ball CSP_BGA package also demands careful power-plane distribution and high-speed routing discipline.

🧩

Voice User Interface Processing

The ADSP-21567KBCZ8 can support a deterministic voice-user-interface pipeline that combines filtering, spectral analysis, feature extraction, and noise suppression. Its 800 MHz SHARC+ processing capability provides parallel fixed- and floating-point execution, while 640 KB of L1 SRAM helps hold active channel data close to the core. The 512 KB of shared L2 SRAM can serve larger intermediate results, and DDR connectivity supports model parameters or extended histories when needed. For production voice systems, validate memory bandwidth, peripheral routing, startup sequencing, and software framework support. The package's 400-ball geometry requires a fine-pitch assembly process and a PCB stack-up that supports the processor and DDR interfaces.

🏭

Industrial Vibration Monitoring

The ADSP-21567KBCZ8 is appropriate for industrial condition-monitoring systems that must sample vibration, execute real-time filters, and identify spectral signatures with predictable response time. Its SHARC+ core reaches 800 MHz, allowing time-domain filtering, FFT processing, and feature extraction to share the processor efficiently. The combined 1.152 MB of on-chip SRAM is valuable for acquisition windows and working buffers, while DDR can hold longer histories used by trending or higher-order analysis. Design the interface path for isolated sensor inputs, coherent sampling, and deterministic data transfer. Validate thermal conditions, clock stability, DDR topology, and protective grounding before deploying the 400-ball CSP_BGA device in a factory environment.

🌐

Real-Time Communications

The ADSP-21567KBCZ8 can serve real-time communications and signal-analysis functions that combine filtering, modulation-related computation, spectral analysis, and data movement. Its 800 MHz SHARC+ core is suited to sustained numerical workloads, while 640 KB of L1 SRAM reduces contention during active processing and 512 KB of shared L2 supports larger intermediate blocks. The DDR interface allows external memory to handle packet buffers, reference tables, or extended acquisition records. For a communications design, check the exact serial peripheral set, supported clock rates, DMA requirements, and DDR topology against the manufacturer documentation. High-speed traces require continuous reference planes and disciplined length control, especially around the 400-ball package.

🚗

Audio Zoning and In-Car Communication

The ADSP-21567KBCZ8 matches audio-zoning and in-car communication workloads requiring multiple channels, deterministic processing, and local buffer capacity. Its 800 MHz SHARC+ core can divide resources among playback paths, microphone processing, and communication channels, while 640 KB of L1 SRAM and 512 KB of shared L2 SRAM reduce external-memory traffic. DDR remains useful for longer audio histories, configuration data, or multi-zone buffers. The design must prioritize synchronized audio clocks, stable power sequencing, and uninterrupted real-time execution. Because the exact ordering code's automotive qualification and temperature grade require confirmation, production programs should verify those requirements and the applicable process capability before release.

Tóm tắt các sản phẩm được đề xuất

ADSP-21567 Base SHARC+ DSP family Được sử dụng trong: Automotive Active Noise Cancellation, Acoustic Echo Cancellation, Voice User Interface Processing, Industrial Vibration Monitoring, Real-Time Communications, Audio Zoning and In-Car Communication ADSP-21568 Related SHARC+ processor platform Được sử dụng trong: Automotive Active Noise Cancellation, Acoustic Echo Cancellation, Voice User Interface Processing, Industrial Vibration Monitoring, Real-Time Communications, Audio Zoning and In-Car Communication
What is the ADSP-21567KBCZ8?
The ADSP-21567KBCZ8 is an Analog Devices SHARC+ fixed- and floating-point digital signal processor rated up to 800 MHz. It provides 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, DDR memory support, and a 400-ball CSP_BGA package measuring 17 x 17 mm. According to the Analog Devices ADSP-21567 product page, this processor family is intended for deterministic, extremely low-latency real-time signal-processing systems.
What are the key specifications of ADSP-21567KBCZ8 that engineers should know?
The ADSP-21567KBCZ8 combines an 800 MHz SHARC+ DSP core with 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, and DDR memory connectivity in a 400-ball CSP_BGA package. The Analog Devices product page identifies the processor as a 64-bit fixed- and floating-point DSP. Its primary engineering strengths are deterministic real-time execution, substantial on-chip memory, and a high-density package suited to advanced automotive and industrial signal-processing boards.
Where to download the ADSP-21567KBCZ8 datasheet PDF?
The ADSP-21567 datasheet is available from the official Analog Devices product page at https://www.analog.com/en/products/ADSP-21567.html. The page identifies the data sheet as revision D and provides the processor family's architecture, memory, interface, electrical, and package information. Use the pin-description tables and DDR interface guidance in that document when creating the schematic, assigning the 400-ball footprint, and planning PCB routing.
Where can I find the ADSP-21567KBCZ8 pinout and package information?
The ADSP-21567KBCZ8 uses a 400-ball CSP_BGA package measuring 17 x 17 mm. The official Analog Devices ADSP-21567 product page provides the family data sheet and technical documentation, while distributor product records identify the exact 400-ball CSP_BGA configuration. Use the manufacturer pin-description table when assigning every ball because a complete 400-pin assignment cannot be reproduced safely from abbreviated catalog listings.
Is the ADSP-21567KBCZ8 suitable for automotive audio processing?
The ADSP-21567KBCZ8 is suitable for deterministic automotive audio workloads because the SHARC+ architecture is specifically positioned for extremely low-latency real-time processing. Analog Devices identifies automotive noise cancellation, acoustic echo cancellation, voice interfaces, audio zoning, in-car communications, and engine-sound processing as representative use cases. The exact AEC-Q100 qualification and operating-temperature grade of this ordering code should be confirmed before release.
What is the ADSP-21567KBCZ8 used for in industrial systems?
The ADSP-21567KBCZ8 can serve as the real-time computation core in industrial vibration monitoring, acoustic measurement, condition-monitoring, and communications systems. Its 800 MHz SHARC+ core, 640 KB L1 SRAM, and 512 KB shared L2 SRAM support filtering and spectral workloads with predictable timing. DDR connectivity permits larger data buffers and working sets when the algorithm cannot remain entirely in on-chip memory.
ADSP-21567KBCZ8 vs ADSP-21568 — which is better for low-latency DSP?
The ADSP-21567KBCZ8 is the better-defined choice when a design specifically targets the documented 800 MHz SHARC+ configuration with 640 KB L1, 512 KB shared L2, DDR, and a 400-ball CSP_BGA package. The ADSP-21568 is a related SHARC+ processor family, but the available information does not establish identical package, memory, clock, or peripheral compatibility. Compare both devices against the complete interface and memory requirements before selecting either part.
When should I choose the ADSP-21567KBCZ8 over another SHARC+ processor?
Choose the ADSP-21567KBCZ8 when the design needs a documented 800 MHz SHARC+ core, 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, and DDR memory support in a 400-ball CSP_BGA package. It is particularly appropriate for deterministic audio and industrial signal-processing systems with sustained real-time workloads. Choose another family member only after confirming clock, memory, peripheral, software, package, and temperature requirements.
What can replace the ADSP-21567KBCZ8?
No verified drop-in replacement for the ADSP-21567KBCZ8 was established by the available cross-reference results. The closely related ADSP-21567BBCZ8 ordering code appears in the same product context and uses the processor family, but its detailed grade and ordering differences are not quantified sufficiently to claim complete interchangeability. A replacement should be accepted only after pin, electrical, memory, peripheral, software, temperature, and footprint review.
Can ADSP-21567BBCZ8 replace ADSP-21567KBCZ8?
ADSP-21567BBCZ8 should be treated as a related ordering code rather than a confirmed drop-in replacement for ADSP-21567KBCZ8. Both are identified with the ADSP-21567 processor family and 800 MHz SHARC+ architecture, but the available results do not quantify their temperature grade, qualification status, or ordering-code differences. Confirm those details in the manufacturer data sheet and the authorized supplier's exact-MPN record before substitution.
Is ADSP-21567KBCZ8 suitable for real-time audio and voice processing?
Yes, the ADSP-21567KBCZ8 is well aligned with deterministic real-time audio and voice processing. The SHARC+ family is specifically highlighted for automotive active noise reduction, acoustic echo cancellation, noise reduction, voice user interfaces, and in-car communications. Its 800 MHz core and 1.152 MB combined on-chip SRAM help minimize external-memory traffic for latency-sensitive filters, transforms, and feature extraction.
What is the best Analog Devices equivalent for ADSP-21567KBCZ8?
ADSP-21567BBCZ8 is the closest identified ordering code within the Analog Devices ADSP-21567 family, but it is not established as a fully drop-in substitute because the grade and suffix differences are not quantified. The ADSP-21568 is another Analog Devices SHARC+ platform, though its detailed electrical and package differences also require verification. Compare the exact ordering codes and complete interfaces rather than relying only on the DSP family name.
Does ADSP-21567KBCZ8 support DDR memory?
Yes, the ADSP-21567KBCZ8 supports DDR memory connectivity. The Analog Devices product page and distributor technical summaries identify the processor as a SHARC+ DSP with DDR. The exact data width, address organization, supported device population, speed grades, and termination requirements must be taken from the manufacturer data sheet before the memory channel is routed or component selection is finalized.
How should a PCB be designed around the ADSP-21567KBCZ8 BGA package?
The ADSP-21567KBCZ8 PCB should preserve continuous return paths and controlled impedance for the 800 MHz core and DDR interfaces. Follow the manufacturer's package and layout guidance for ball escapes, layer changes, length matching, power distribution, decoupling, and exposed-pad or thermal-via requirements. A 400-ball CSP_BGA also demands a PCB fabricator and assembler capable of producing and inspecting the specified fine-pitch lands and solder joints.
Where to buy ADSP-21567KBCZ8, and what are its price and lead time?
Use the Request a Quote form on this page to request ADSP-21567KBCZ8 availability, current commercial terms, and lead time for the exact ordering code. Quote the full MPN ADSP-21567KBCZ8 and identify the required quantity, tray packaging, and production date-code requirements. Because the processor is specified as a 400-ball CSP_BGA, also confirm PCB assembly capability and whether an evaluation board or prototype quantity is required.

Dữ liệu tham khảo kỹ thuật cho ADSP-21567KBCZ8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose ADSP-21567KBCZ8 for a design requiring a documented 800 MHz SHARC+ DSP with 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, DDR support, and a 400-ball CSP_BGA package. It is well suited to deterministic automotive audio, voice processing, communications, and industrial monitoring systems where predictable execution and local memory reduce external-transfer overhead. ADSP-21567BBCZ8 may represent a closely related ordering code, but it should be selected only after its suffix and grade differences are confirmed. ADSP-21568 is a related SHARC+ platform and may offer a different balance of resources, but it is not established as package- and pin-compatible with ADSP-21567. For any replacement, compare DDR topology, serial peripherals, clock generation, temperature range, qualification, software support, PCB land pattern, and assembly requirements before approving a substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADSP-21567BBCZ8
Brand Analog Devices Analog Devices
Package 400-ball CSP_BGA (17 x 17 mm) 400-ball CSP_BGA (17 x 17 mm)
Maximum Clock Frequency 800 MHz 800 MHz
L1 SRAM 640 KB 640 KB
Shared L2 SRAM 512 KB 512 KB
External Memory Interface DDR DDR
Architecture SHARC+ fixed/floating-point DSP SHARC+ fixed/floating-point DSP

Bảo phân biệt quan trọng

  • High on-chip memory for deterministic real-time workloads (vsADSP-21567BBCZ8)
  • 800 MHz SHARC+ processing performance (vsADSP-21567BBCZ8)
  • DDR-connected system architecture (vsADSP-21567BBCZ8)
  • Exact-ordering-code sourcing for production (vsADSP-21567BBCZ8)

Ghi chú thiết kế

Treat the 400-ball CSP_BGA escape routing and DDR interface as the primary PCB-layout constraints. Maintain continuous reference planes beneath high-speed routes, use the manufacturer-recommended stack-up and impedance geometry, and route the processor and memory on adjacent layers where practical. Avoid unnecessary plane transitions, provide adequate via geometry for the required ball pitch, and verify every external DDR component against the manufacturer's supported topology. Final escape routing must be checked against the official land pattern rather than inferred from catalog illustrations.

Build the processor power network for both high-frequency core current and DDR-interface transients. Place local ceramic decoupling at the supply and ground balls identified by the manufacturer, connect the package thermal or ground structure as specified, and use a continuous power plane with minimal impedance between the regulator and the 400-ball package. Validate the exact core and I/O voltage rails, sequencing, ramp limits, and capacitor values against the ADSP-21567 data sheet before component selection. Do not infer the supply network from nominal processor clock or memory capacity.

Control the DDR channel as a coupled set of nets rather than as independent point-to-point routes. Apply the manufacturer's guidance for topology, trace length matching, reference-plane transitions, and via stub control, and simulate the complete board stack-up when interface margin is tight. Keep high-current switching nodes and inductors away from the processor's clock, DDR, and external-memory reference regions. Because the available product information does not state the complete interface ratings, confirm speed limits and layout constraints from the manufacturer documentation.

Evaluate thermal performance with the processor's actual core activity, DDR traffic, supply voltage, ambient temperature, and board construction. Use the manufacturer-recommended thermal-via and exposed-pad connection pattern where specified, and avoid placing the BGA in a pocket surrounded by components that obstruct heat flow. The 800 MHz clock alone is not a valid thermal estimate because switching activity and memory traffic dominate real dissipation. Confirm maximum operating conditions and thermal resistance from the device documentation and conduct board-level thermal validation.

Do not substitute ADSP-21567BBCZ8 or ADSP-21568 solely because they share the SHARC+ family name. The B and K ordering suffixes can encode commercial, temperature, or other distinctions, and a different family member may change package, clock, memory, peripherals, or software support. Before substitution, compare the exact ordering tables, pin descriptions, electrical limits, peripheral sets, memory configuration, temperature grades, qualification status, and package drawings. Use the Request a Quote form to obtain confirmation for the exact MPN.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is identified in the product record for ADSP-21567KBCZ8. REACH, lead-free status, halogen-free status, conflict-minerals status, and the exact AEC-Q100 qualification status of this ordering code require manufacturer confirmation.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADSP-21567KBCZ8 datasheet ADSP-21567KBCZ8 specifications ADSP-21567KBCZ8 pinout ADSP-21567KBCZ8 datasheet pdf ADSP-21567KBCZ8 footprint ADSP-21567KBCZ8 equivalent ADSP-21567KBCZ8 replacement ADSP-21567KBCZ8 vs ADSP-21568 ADSP-21567KBCZ8 automotive audio ADSP-21567KBCZ8 DDR interface Analog Devices ADSP-21567KBCZ8 ADSP-21567KBCZ8 price ADSP-21567KBCZ8 stock ADSP-21567 BBC BGA pinout ADSP-21567 application circuit

Các bộ phận và thuật ngữ liên quan

Analog Devices ADSP-21567KBCZ8 ADSP-21567BBCZ8 ADSP-21568 SHARC+ digital signal processor DSP fixed-point arithmetic floating-point arithmetic 64-bit processor 800 MHz 640 KB L1 SRAM 512 KB shared L2 SRAM DDR memory interface 400-ball CSP_BGA 17 x 17 mm BGA surface mount RoHS automotive active noise cancellation acoustic echo cancellation voice user interface industrial vibration monitoring real-time audio processing deterministic signal processing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ