ADSP-21573BBCZ-5 - 500MHz Dual SHARC DSP | Analog Devices
MPN: ADSP-21573BBCZ-5 ✓ Hoạt độngADSP-21573BBCZ-5 Tóm tắt
A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for mathematically intensive operations such as filtering, FFT processing, modulation, and real-time data conversion. The ADSP-2157x family belongs to the SHARC product hierarchy: DSP > real-time signal processor > SHARC processor > semiconductor. Its dual-core architecture can support parallelizable processing while the DDR interface provides access to external high-speed memory.
The ADSP-21573BBCZ-5 combines two SHARC processor cores with a 500 MHz clock and DDR memory capability. The 400-CSPBGA package provides 400 connection positions for power, ground, high-speed interfaces, memory connections, and control signals. The listed industrial temperature range is -40°C to 85°C, and the device operates from a 1.15 V supply. Its fixed- and floating-point processing capability makes it suitable for embedded signal-processing platforms rather than general-purpose control applications.
The BGA package makes board-level electrical and thermal performance especially important. A 400-ball design generally demands careful escape-routing, layer-transition, and power-distribution planning because signal escape, via current, and return-path continuity all affect signal integrity. The ADSP-21573BBCZ-5 should therefore be evaluated with its complete reference design, including DDR layout, decoupling strategy, clock implementation, and exposed thermal-management requirements.
Typical applications include professional audio processing, communications and modem signal chains, industrial measurement, radar or sonar data processing, and embedded test equipment. In each case, the two SHARC cores can divide suitable workloads between parallel channels, while DDR support accommodates larger working data sets than would be practical with internal memory alone. The exact peripheral configuration and software support must be confirmed against the manufacturer datasheet for the assigned board revision.
When planning a design, verify the complete pin assignment, power rails, clock requirements, and memory topology in the Analog Devices documentation. The processor’s 500 MHz operating rate and DDR interfaces can expose routing, jitter, and power-integrity problems that are difficult to diagnose in prototype hardware. Preserve the reference-design stack-up and land pattern whenever possible.
This page consolidates the verified product identity, package information, current sourcing route, interface selection guidance, and practical integration considerations for engineers comparing ADSP-21573BBCZ-5 with other SHARC-based implementations.
Bộ thay thế dễ dàng lắp đặt cho ADSP-21573BBCZ-5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADSP-21573BBCZ-5 (cùng hình factor và footprint) — khác nhau ở Arithmetic Support, Operating Temperature Range, Package, Processor Family, RoHS Status.
ADSP-21573CBCZ-5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADSP-21573BBCZ-5 Thông số kỹ thuật
| Processor Core | 2x SHARC |
| Tần số xung maksimum | 500 MHz |
| Arithmetic Support | Fixed and floating point |
| External Memory Support | DDR |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 x 17 mm |
| Number of Package Balls | 400 balls |
| Minimum Supply Voltage | 1.15 V |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| Mounting Technology | Surface-mount BGA |
| Product Family | ADSP-2157x SHARC processor |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân ADSP-21573BBCZ-5 400 balls
Cấu hình chân cho ADSP-21573BBCZ-5 (400 balls gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADSP-21573BBCZ-5.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADSP-21573BBCZ-5 phù hợp cho 6 Áp dụngs: Professional Audio Signal Processing, Communications and Modem Processing, Industrial Measurement and Control, Radar and Sonar Processing, Test and Measurement Instrumentation, Embedded Audio and Communications Products.
Professional Audio Signal Processing
The ADSP-21573BBCZ-5 fits professional audio processing because its two SHARC cores operate at 500 MHz and support fixed- and floating-point arithmetic. These resources can divide filtering, equalization, dynamics processing, and channel-conversion workloads between parallel processing paths. DDR support is valuable when a project requires larger sample buffers, multichannel histories, or parameter tables beyond practical internal-memory capacity. The 400-CSPBGA package reduces board area relative to many leaded packages, but the design must preserve the reference layout and carefully route clocks, DDR signals, and power. Software partitioning and real-time scheduling remain as important as raw clock speed because sustained performance depends on memory behavior, peripheral utilization, and whether the chosen algorithm maps efficiently onto both SHARC cores.
Được đề xuất
Communications and Modem Processing
The ADSP-21573BBCZ-5 is applicable to communications equipment requiring deterministic real-time computation at 500 MHz. Two SHARC cores can support parallel channel filtering, symbol processing, spectral analysis, and protocol-related work when software is partitioned to minimize inter-core transfers. DDR memory support allows high-throughput access to larger working sets, which can reduce pressure on internal memories during complex modem or channel-processing workloads. Engineers should use the manufacturer’s reference design to establish DDR topology, clocking, and power distribution. The -40°C to 85°C operating range supports industrial equipment, while the 400-CSPBGA package demands controlled assembly, X-ray inspection, and thermal validation to preserve long-term reliability under sustained processing load.
Được đề xuất
Industrial Measurement and Control
The ADSP-21573BBCZ-5 can serve industrial measurement systems that must acquire, filter, and analyze signals in real time. Its dual SHARC cores provide two parallel processing engines at 500 MHz, while DDR support can accommodate long capture buffers and multi-stage algorithms. The listed -40°C to 85°C temperature range is appropriate for many industrial environments, although the completed enclosure must control temperature rise at the 400-ball BGA. Firmware should divide acquisition, filtering, and analysis into deterministic tasks to maintain timing margins. Because the processor uses a 1.15 V supply, the complete power tree, decoupling network, sequencing, and clock source must follow the Analog Devices reference design to prevent initialization or signal-integrity problems.
Được đề xuất
Radar and Sonar Processing
The ADSP-21573BBCZ-5 is suitable for radar, sonar, and related high-throughput signal-chain processing where filters, transforms, detection stages, and tracking algorithms must execute predictably. Two 500 MHz SHARC cores can improve throughput by assigning independent stages or channels to separate cores, while DDR support provides access to larger sample and history buffers. The 400-CSPBGA package keeps the processor compact but creates a demanding high-speed layout environment, especially where DDR routing and external clocks are present. System engineers should budget thermal capacity from the beginning because sustained real-time workloads can keep both cores active. Firmware should avoid uncontrolled contention on shared memory and buses, and validation should include worst-case throughput, clock jitter, memory margin, and thermal steady-state testing.
Được đề xuất
Test and Measurement Instrumentation
The ADSP-21573BBCZ-5 can support high-performance test and measurement instruments that perform real-time filtering, analysis, modulation, or waveform processing. The dual-core SHARC architecture allows two processing pipelines to operate concurrently at 500 MHz, and DDR support helps manage large acquisition records. This combination is useful when the instrument must preserve deterministic response while transferring or analyzing continuous data. The device’s 400-CSPBGA footprint requires a multilayer PCB with the stack-up and DDR routing prescribed by the reference design. Clock accuracy and jitter directly influence result quality, so the clock architecture must be evaluated alongside the processor rather than treated as an isolated support function. Thermal testing should cover sustained acquisition rather than only short functional bursts.
Được đề xuất
Embedded Audio and Communications Products
The ADSP-21573BBCZ-5 is appropriate for embedded products that combine high-resolution audio, communications, or sensor processing in a compact board. Its two SHARC cores at 500 MHz can service multiple real-time channels, and the DDR interface can support larger audio histories, network buffers, or sensor streams. A 1.15 V operating supply supports power-conscious integration, but it requires careful generation of all required rails and correct startup sequencing. The 17 x 17 mm, 400-ball BGA provides substantial connectivity while making assembly, inspection, and repair more demanding than a leaded package. Product teams should use the manufacturer reference design as the foundation for PCB stack-up, DDR topology, decoupling, clocking, and thermal spreading, then qualify the assembled board under full-load conditions.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADSP-21573BBCZ-5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
ADSP-21573CBCZ-5 is the nearest documented same-family candidate because it shares the 500 MHz clock, two-core SHARC configuration, DDR capability, and 400-CSPBGA 17 x 17 mm package. However, the available product records do not define every difference between the B and C ordering codes, so it should be selected only after Analog Devices confirms pin, temperature, silicon, and software compatibility. No cross-brand equivalent with verified pin compatibility was identified; changing processor families would therefore require a new board design, software port, and system revalidation rather than a drop-in substitution.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADSP-21573CBCZ-5 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| Processor Core | 2x SHARC | 2x SHARC |
| Clock Frequency | 500 MHz | 500 MHz |
| Arithmetic Support | Fixed and floating point | Fixed and floating point |
| External Memory Support | DDR | DDR |
Bảo phân biệt quan trọng
- Two SHARC processing cores (vsADSP-21573CBCZ-5)
- 500 MHz real-time processing clock (vsADSP-21573CBCZ-5)
- DDR-capable 400-CSPBGA implementation (vsADSP-21573CBCZ-5)
Ghi chú thiết kế
Use the Analog Devices reference PCB stack-up, DDR topology, and 400-CSPBGA land pattern as the starting point for layout. DDR and processor clock routes are especially sensitive to return-path discontinuities, layer transitions, and impedance variation. Place decoupling and clock circuitry according to the manufacturer guidance, and preserve via access beneath the BGA where the reference design specifies it. Do not improvise a 400-ball escape strategy without signal-integrity validation.
The processor is listed with a 1.15 V operating supply, so rail generation, sequencing, voltage tolerance, and transient response require careful validation. Follow the manufacturer power-tree design rather than treating the BGA supply connections as generic digital power pins. Check DC operating points and startup behavior with the DDR interface active. Estimated: power equals 1.15 V multiplied by measured total processor and memory current; no estimate is stated because operating current was not established.
Two SHARC cores operating at 500 MHz can sustain substantial activity during real-time processing. Model the 400-CSPBGA with the manufacturer’s junction-to-ambient data and the actual PCB copper area, then validate with a worst-case workload. Maintain continuous thermal spreading beneath the device where the reference layout requires it, use controlled enclosure airflow when required, and avoid relying on short-duration benchmark temperatures as proof of steady-state reliability.
Do not treat ADSP-21573CBCZ-5 as an automatic substitution until its ordering-code details are confirmed against the ADSP-21573 product-selection table. The shared 500 MHz clock, dual-SHARC architecture, DDR support, and 400-CSPBGA package make it a strong candidate, but silicon, temperature, and ordering differences can still affect qualification. Record the manufacturer confirmation before releasing a new PCB or production build.
Thông tin tuân thủ
The exact-MPN product listing identifies the device as RoHS compliant. Other environmental, automotive, halogen-free, and conflict-minerals declarations require manufacturer confirmation.