ADSP-2171KS-104 - 16-Bit 26MHz DSP | Analog Devices
MPN: ADSP-2171KS-104 ✗ Cuối đờiADSP-2171KS-104 Tóm tắt
A digital signal processor is a semiconductor designed to execute mathematical operations on sampled data efficiently. Unlike a general-purpose microprocessor, a DSP architecture emphasizes predictable execution, multiply-accumulate operations, data movement, and control of real-time signal-processing workloads. The ADSP-2171 family is positioned as a single-chip DSP microcomputer for applications requiring fast fixed-point computation and dedicated external interfaces.
Key features include a 16-bit fixed-point processing architecture, 26 MHz operating frequency, and a listed 26 MIPS rating. The ADSP-217x family is manufactured in a high-speed, double-metal, low-power CMOS process, with a 30 ns instruction cycle time. The 128-pin PQFP package provides a high pin count for external memory, address, data, serial, host, and control connectivity.
The ADSP-2171KS-104 is suited to communications, industrial control, audio, instrumentation, and embedded signal-processing systems where deterministic numeric processing is more important than general-purpose computing. Its two serial ports and host port support peripheral connectivity, while the 16-bit architecture is appropriate for fixed-point algorithms, filtering, modulation, decoding, and control-loop implementations.
When designing around this processor, verify the complete electrical, timing, pin, memory, and clock requirements against the manufacturer datasheet before finalizing the PCB. Pay particular attention to 5 V supply sequencing, external memory interfaces, clock routing, and decoupling. The 128-pin PQFP footprint also requires adequate board area and careful signal routing around the dense perimeter pads.
This product page organizes the verified ADSP-2171KS-104 identity, package information, interface details, application fit, design considerations, and qualification questions for engineers evaluating the DSP in new or legacy signal-processing equipment.
Bộ thay thế dễ dàng lắp đặt cho ADSP-2171KS-104 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ADSP-2171KS-100
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADSP-2171KSZ-104
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADSP-2171KS-104
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADSP-2171KS-104-REEL
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADSP-2171KS-104-T
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADSP-2171KS-104 Thông số kỹ thuật
| Product Type | Fixed-point digital signal processor (DSP) |
| Architecture | 16-bit fixed-point |
| Clock Frequency | 26 MHz |
| MIPS Rating | 26 MIPS |
| Điện áp cung cấp | 5.0 V |
| Serial Ports | 2 |
| Host Port | Present |
| Instruction Cycle Time | 30 ns |
| Package Type | 128-pin PQFP |
| Package Dimensions | 28 mm x 28 mm |
| Process Technology | High-speed, double-metal, low-power CMOS |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân ADSP-2171KS-104 28 mm x 28 mm
Cấu hình chân cho ADSP-2171KS-104 (28 mm x 28 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADSP-2171KS-104.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADSP-2171KS-104 phù hợp cho 6 Áp dụngs: Communications Signal Processing, Industrial Measurement and Control, Audio Processing, Instrumentation and Test Equipment, Motor and Motion Control, Legacy Equipment Repair and Replacement.
Communications Signal Processing
The ADSP-2171KS-104 is appropriate for communications equipment requiring deterministic fixed-point signal processing, including filtering, modulation, demodulation, or data conditioning. Its 16-bit architecture, 26 MHz clock, 26 MIPS rating, and 30 ns instruction cycle time provide a defined execution foundation for real-time algorithms. The two serial ports and host port can support data exchange with converters, transceivers, and host controllers, while the 128-pin PQFP package exposes the external-memory and peripheral connectivity required by a larger communications design.
Được đề xuất
Industrial Measurement and Control
The ADSP-2171KS-104 can serve as the dedicated numeric-processing engine in industrial measurement, condition-monitoring, and control systems. Its 16-bit fixed-point architecture is well suited to sampled-signal filtering, scaling, limit detection, and control calculations that must execute repeatedly with predictable timing. The host port provides a path toward supervisory control, while the serial ports can connect to sensors or converters. A 5.0 V supply and external-memory interface must be designed together to maintain deterministic operation under industrial loading.
Được đề xuất
Audio Processing
The ADSP-2171KS-104 is suitable for embedded audio processing functions such as equalization, mixing, filtering, and signal conditioning when an established 16-bit fixed-point design is preferred. The 26 MHz operating frequency and 26 MIPS rating provide the processing headroom described for the ADSP-2171 family, while the two serial ports can interface with audio converters or other digital sources. The host port can coordinate higher-level control. Final audio performance depends on converter interface implementation, external memory behavior, clocking, and algorithm design.
Được đề xuất
Instrumentation and Test Equipment
The ADSP-2171KS-104 is appropriate for instrumentation that performs real-time acquisition conditioning, waveform analysis, filtering, or calibration in a dedicated processor. A 16-bit DSP architecture supports fixed-point numerical workloads and predictable interrupt-driven operation, while the host port enables communication with a system controller. Its 128-pin PQFP package supports the memory and I/O density required for sophisticated measurement systems. Engineers should validate analog-to-digital converter timing, memory access, reference-clock integration, and 5 V power quality for the final instrument configuration.
Được đề xuất
Motor and Motion Control
The ADSP-2171KS-104 can be evaluated for embedded motion-control tasks that combine sampled feedback with fixed-point arithmetic, including loop filtering, coordinate transformation, and diagnostic calculations. The listed 26 MIPS performance and 30 ns instruction cycle time make the processor suitable for deterministic control-loop computation, while its serial ports and host port support sensor input and supervisory control. The design must account for 5 V supply tolerance, external memory timing, interrupt latency, and the electrical requirements of the power stage.
Được đề xuất
Legacy Equipment Repair and Replacement
The ADSP-2171KS-104 is useful for maintaining or reproducing equipment built around the ADSP-2171 family because it preserves the documented 16-bit fixed-point architecture, 26 MHz clock, 5.0 V operating requirement, and 128-pin PQFP format. The two serial ports and host port support connections found in established communications, industrial, and test systems. For repair projects, compare the exact suffix, pin assignment, clock source, memory configuration, and boot or program-memory requirements with the failed assembly before ordering a replacement.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADSP-2171KS-104 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADSP-2171KS-100 | ADSP-2171KSZ-104 | ADSP-2171KS-104 | ADSP-2171KS-104-REEL | ADSP-2171KS-104-T |
|---|---|---|---|---|---|---|
| Package | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP | 128-pin PQFP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Product Type | Fixed-point digital signal processor | Fixed-point digital signal processor | Fixed-point digital signal processor | Fixed-point digital signal processor | Fixed-point digital signal processor | Fixed-point digital signal processor |
| Architecture | 16-bit fixed-point | 16-bit fixed-point | 16-bit fixed-point | 16-bit fixed-point | 16-bit fixed-point | 16-bit fixed-point |
Bảo phân biệt quan trọng
- Dedicated fixed-point processing architecture (vsGeneral-purpose microcontrollers represented by Site MPN alternatives such as PIC24HJ64GP210-I/PT)
- Two serial ports plus host interface (vsADSP-2171KS-100)
- Established 128-pin PQFP integration footprint (vsADSP-2171KSZ-104)
- 26 MHz processing baseline for deterministic 5 V designs (vsADSP-2171KS-104-REEL)
Ghi chú thiết kế
The ADSP-2171KS-104 is specified for 5.0 V operation. Design the supply rail around the exact datasheet limits, startup behavior, and current requirements rather than treating 5.0 V as a generic logic level. Place local decoupling close to the device power and ground pins, provide a low-impedance return path, and check the supply under external-memory and serial-interface activity. Confirm whether the host system requires a particular power-up or reset sequence before releasing the processor.
The 128-pin PQFP footprint has a dense perimeter pad arrangement and supports substantial external connectivity. Follow the manufacturer package dimensions and footprint recommendations exactly, including pin numbering, solder-mask clearance, and paste pattern. Route clocks and high-speed memory signals with short paths, keep switching outputs away from sensitive inputs, and provide an uninterrupted ground reference beneath the device where the package construction permits. Validate the completed layout against the PCB assembly and datasheet guidance.
Do not assume that another ADSP-2171 ordering code is electrically interchangeable merely because it uses the same package family. Suffix codes may identify speed grade, temperature grade, package form, or production status. For a replacement, compare the complete ordering tables, supply limits, clock requirements, memory organization, peripheral configuration, and all 128 pin assignments. Program-memory and boot behavior must also match the original system before the replacement is released to production.
Clock quality and external-memory timing directly affect deterministic DSP execution. Use a low-jitter clock source, route it away from serial and memory outputs, and follow the datasheet guidance for termination and impedance. Analyze setup and hold requirements for external memory and host-port signals at the intended clock rate. If the system combines processor, memory, and converters, test signal integrity with realistic loading rather than only isolated functional waveforms.
Thông tin tuân thủ
No explicit environmental or product-compliance declarations were identified in the available product and distributor information. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current product documentation.