ADUM5412ARWZ-RL7 - Quad-Channel Digital Isolator with isoPower | Analog Devices
MPN: ADUM5412ARWZ-RL7 ✓ Hoạt độngADUM5412ARWZ-RL7 Tóm tắt
Bộ thay thế dễ dàng lắp đặt cho ADUM5412ARWZ-RL7 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADUM5412ARWZ-RL7 (cùng hình factor và footprint) — khác nhau ở Package.
ADUM5411ARWZ-RL7
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADUM5410ARWZ-RL7
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →ADUM5412ARWZ-RL7 Thông số kỹ thuật
| Number of Channels | 4 |
| Channel Directionality | 2 forward, 2 reverse |
| Isolation Rating | 2500 Vrms |
| Tốc độ dữ liệu | 150 Mbps |
| Common-Mode Transient Immunity (CMTI) | 75 kV/µs |
| Isolated Output Voltage Range | 3.15 V to 5.25 V |
| Hộp | 24-SOIC-W (0.295", 7.50mm Width) |
| Khoảng nhiệt độ hoạt động | -40°C to +125°C |
| Supply Voltage (Primary) | 3.0 V to 5.5 V |
| Trạng thái RoHS | Compliant |
| Kiểu lắp đặt | Surface Mount |
| Technology | iCoupler |
Cấu hình chân ADUM5412ARWZ-RL7
| Chân 1 | VDD1 — Primary side supply voltage |
| Chân 2 | GND1 — Primary side ground |
| Chân 3 | VIA — Input channel A (forward) |
| Chân 4 | VOA — Output channel A (forward) |
| Chân 5 | VIB — Input channel B (forward) |
| Chân 6 | VOB — Output channel B (forward) |
| Chân 7 | GND1 — Primary side ground |
| Chân 8 | VDD1 — Primary side supply voltage |
| Chân 9 | VISO — Isolated output voltage |
| Chân 10 | GNDISO — Isolated ground |
| Chân 11 | VOC — Output channel C (reverse) |
| Chân 12 | VIC — Input channel C (reverse) |
| Chân 13 | VOD — Output channel D (reverse) |
| Chân 14 | VID — Input channel D (reverse) |
| Chân 15 | GNDISO — Isolated ground |
| Chân 16 | VISO — Isolated output voltage |
| Chân 17 | VDD1 — Primary side supply voltage |
| Chân 18 | GND1 — Primary side ground |
| Chân 19 | NC — No connect |
| Chân 20 | NC — No connect |
| Chân 21 | NC — No connect |
| Chân 22 | NC — No connect |
| Chân 23 | NC — No connect |
| Chân 24 | NC — No connect |
Ứng dụng tiêu biểu
ADUM5412ARWZ-RL7 phù hợp cho 6 Áp dụngs: Industrial Fieldbus Isolation, Isolated SPI Communication, Isolated Power Supply for Data Acquisition, Isolated Gate Driver Interface, Isolated RS-485 Transceiver Interface, Isolated CAN Bus Interface.
Industrial Fieldbus Isolation
The ADUM5412ARWZ-RL7 provides galvanic isolation and isolated power for industrial fieldbus interfaces such as RS-485, CAN, and Profibus. Its 2.5 kVrms isolation and 75 kV/µs CMTI ensure reliable communication in noisy industrial environments. The integrated DC-DC converter eliminates the need for a separate isolated power supply, simplifying design and reducing board space. With a data rate of 150 Mbps, it supports high-speed fieldbus protocols. The device operates over -40°C to +125°C, suitable for harsh industrial conditions. Its 2:2 channel configuration allows bidirectional communication, making it ideal for transceiver interfaces. The isolated output voltage can be adjusted to match the transceiver's supply requirements, ensuring compatibility. This application benefits from the device's high CMTI, which prevents data corruption from fast transients. Overall, the ADUM5412ARWZ-RL7 enhances system robustness and simplifies power architecture in industrial automation.
Được đề xuất
Isolated SPI Communication
The ADUM5412ARWZ-RL7 is ideal for isolating SPI buses between microcontrollers and peripheral devices such as ADCs, DACs, and sensors. Its 150 Mbps data rate supports high-speed SPI clocks, while the integrated DC-DC converter provides isolated power to the peripheral side, eliminating the need for a separate isolated supply. The 2:2 channel configuration can be used for MOSI, MISO, SCLK, and chip select signals. The device's low propagation delay and high CMTI ensure reliable data transfer in electrically noisy environments. The adjustable isolated output voltage (3.15V to 5.25V) allows compatibility with various logic levels. This application is common in data acquisition systems, motor control, and medical devices where isolation is required for safety and noise immunity. The ADUM5412ARWZ-RL7 simplifies the design by integrating power and signal isolation in a single package, reducing component count and board area.
Được đề xuất
Isolated Power Supply for Data Acquisition
The ADUM5412ARWZ-RL7 provides both signal isolation and isolated power for data acquisition systems, ensuring clean and isolated power to analog front-ends. The integrated DC-DC converter delivers a regulated output adjustable from 3.15V to 5.25V, which can power ADCs, op-amps, and sensors on the isolated side. This eliminates the need for a separate isolated DC-DC module, reducing cost and board space. The device's 2.5 kVrms isolation protects sensitive analog circuitry from ground loops and high-voltage transients. With a data rate of 150 Mbps, it can handle high-speed data streams from high-resolution ADCs. The high CMTI (75 kV/µs) ensures signal integrity in industrial environments with fast switching noise. This application is common in process control, power monitoring, and medical instrumentation where accurate measurements require isolation. The ADUM5412ARWZ-RL7 simplifies the power architecture and enhances system reliability.
Được đề xuất
Isolated Gate Driver Interface
The ADUM5412ARWZ-RL7 can be used to isolate control signals for gate drivers in power electronics applications such as motor drives and inverters. Its high CMTI (75 kV/µs) ensures reliable operation in the presence of fast switching transients. The integrated DC-DC converter can provide isolated bias power to the gate driver, eliminating the need for a separate isolated supply. The 2:2 channel configuration can carry PWM signals and fault feedback. The device's 150 Mbps data rate supports high-frequency PWM signals. The adjustable output voltage allows matching the gate driver's supply requirements. This application benefits from the device's robust isolation and integrated power, simplifying the design of isolated gate drive circuits. The ADUM5412ARWZ-RL7 enhances system safety by providing galvanic isolation between the control and power stages.
Được đề xuất
Isolated RS-485 Transceiver Interface
The ADUM5412ARWZ-RL7 is well-suited for isolating RS-485 transceivers in industrial networks. It provides signal isolation for the data lines and integrated power for the transceiver, eliminating the need for a separate isolated DC-DC converter. The 2:2 channel configuration can handle TX, RX, and control signals. With a data rate of 150 Mbps, it supports high-speed RS-485 communication. The device's 2.5 kVrms isolation protects the bus side from ground potential differences and electrical noise. The high CMTI ensures reliable data transmission in harsh industrial environments. The adjustable isolated output voltage can be set to match the transceiver's supply voltage (e.g., 3.3V or 5V). This application is common in building automation, factory automation, and utility monitoring. The ADUM5412ARWZ-RL7 simplifies the design and improves system reliability by integrating power and signal isolation.
Được đề xuất
Isolated CAN Bus Interface
The ADUM5412ARWZ-RL7 can be used to isolate CAN bus transceivers in automotive and industrial applications. It provides galvanic isolation for the CAN signals and integrated power for the transceiver, reducing component count. The 2:2 channel configuration can handle CAN TX, RX, and control signals. With a data rate of 150 Mbps, it easily supports CAN-FD at higher speeds. The device's 2.5 kVrms isolation protects the microcontroller side from bus transients and ground shifts. The high CMTI ensures reliable communication in noisy environments. The adjustable isolated output voltage can be set to match the transceiver's supply. This application is common in automotive electronics, industrial control, and building automation. The ADUM5412ARWZ-RL7 enhances system robustness and simplifies power design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADUM5412ARWZ-RL7 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADUM5412BRSZ-RL7 | ADUM5411ARWZ-RL7 | ADUM5410ARWZ-RL7 |
|---|---|---|---|---|
| Package | 24-SOIC-W | 24-SSOP | 24-SOIC-W | 24-SOIC-W |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Isolation Rating | 2500 Vrms | 2500 Vrms | 2500 Vrms | 2500 Vrms |
| Data Rate | 150 Mbps | 150 Mbps | 150 Mbps | 150 Mbps |
| CMTI | 75 kV/µs | 75 kV/µs | 75 kV/µs | 75 kV/µs |
| Channel Configuration | 2:2 | 2:2 | 3:1 | 4:0 |
| Isolated Output Voltage | 3.15V to 5.25V | 3.15V to 5.25V | 3.15V to 5.25V | 3.15V to 5.25V |
| Operating Temperature | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
Bảo phân biệt quan trọng
- Integrated isolated DC-DC converter (vsADUM3211WBRZ-RL7)
- Higher data rate and CMTI (vsADUM5212ARSZ-RL7)
- Wide SOIC-W package for better creepage (vsADUM5412BRSZ-RL7)
Ghi chú thiết kế
The integrated DC-DC converter requires proper input and output decoupling. Place a 10 µF ceramic capacitor on VDD1 and a 10 µF capacitor on VISO to ensure stable operation. The output voltage is set by an external resistor divider; use 1% tolerance resistors for accurate regulation. The converter can deliver up to [DATA_NEEDED: output current] mA, so ensure the load does not exceed this limit.
For optimal isolation performance, maintain a minimum creepage distance of 8 mm between primary and secondary sides on the PCB. Use a solid ground plane under the device and avoid routing high-speed signals near the isolation barrier. The SOIC-W package has a wide body, which helps achieve the required creepage. Follow the layout guidelines in the datasheet for best EMI performance.
Do not exceed the absolute maximum ratings for VDD1 and VISO. Ensure the isolated output voltage is set within the specified range (3.15V to 5.25V). When synchronizing multiple devices, use the SYNC pin to reduce EMI; refer to the datasheet for proper connection. Also, note that the 'A' grade has specific performance characteristics; verify if you need the 'B' grade for higher data rates.
Thông tin tuân thủ
RoHS compliant per distributor listings. No AEC-Q100 qualification indicated for this part.
