AK4490EN - 32-Bit 2ch Audio DAC, 768kHz DSD | Asahi Kasei Microdevices
MPN: AK4490EN ✓ Hoạt độngAK4490EN Tóm tắt
A DAC (digital-to-analog converter) is a mixed-signal semiconductor that reconstructs a continuous analog voltage from a digital audio stream. The broader hierarchy runs DAC -> audio data converter -> ADC/DAC converter -> mixed-signal integrated circuit -> semiconductor. The AK4490EN implements a multi-bit delta-sigma architecture, a topology favored in premium audio because it pushes quantization noise far out of the audio band, leaving the in-band noise floor extremely low compared with basic 1-bit sigma-delta designs.
Key features include native 32-bit word length, dual-channel simultaneous conversion, DSD256 (768 kHz) decoding capability, and an I2S-compatible serial interface that accepts PCM data at high clock rates. The device is a fully differential architecture with an exposed pad that must be soldered to a ground plane to carry heat away and to provide a low-impedance return for the output stage. Its surface-mount footprint keeps board area small for compact desktop and portable audio products.
Technically, the AK4490EN combines a high-speed delta-sigma modulator stage with a multi-bit DAC core and an analog output filter, giving the low distortion and wide dynamic range that characterize AKM's premium 32-bit 2ch DAC family. The 48-QFN package with a thermal pad keeps junction temperature rise low when driving line-level outputs into the usual 10 kohm-plus loads of audio preamplifiers and active stages.
Typical applications include high-end USB and network DAC boards, CD player and streamer digital stages, professional studio monitor digital crossovers, television and set-top box audio, and portable hi-fi headphone DAC dongles. In each case the converter sits between an I2S digital source and an analog output stage, so clocking and layout discipline translate directly into final sound quality.
One critical design consideration is that DSD and PCM paths require different filter configurations; use the manufacturer datasheet tables for sampling-rate, MCLK ratio and filter-mode settings rather than assuming values. A second is that the exposed pad must be tied to a solid ground plane, and the analog output routing should be kept short and symmetric to minimize channel skew and distortion.
This page consolidates device specifications, drop-in alternatives with quantified differences, application guidance and practical design notes, giving engineers a single reference for the AK4490EN before committing to a layout.
Bộ thay thế dễ dàng lắp đặt cho AK4490EN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với AK4490EN (cùng hình factor và footprint) — khác nhau ở Package.
AK4490EQ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →AK4490VN
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
AK4490EN Tỷ lệ tối đa & tính chất điện
| Device Type | Stereo audio DAC (digital-to-analog converter) |
| Độ phân giải | 32 bit |
| Kênh | 2 (dual-channel) |
| Architecture | Delta-sigma |
| Maximum DSD Rate | 768 kHz (DSD256) |
| Digital Audio Interface | I2S |
| Hộp | 48-QFN (6 x 6 mm) with exposed pad |
| Số chân | 48 pins |
| Kiểu lắp đặt | Surface Mount |
| Product Class | Premium 32-bit 2ch DAC |
Hướng dẫn cấu hình chân AK4490EN 48-qfn (6 x 6 mm) with exposed pad
Cấu hình chân cho AK4490EN (48-qfn (6 x 6 mm) with exposed pad gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AK4490EN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AK4490EN phù hợp cho 6 Áp dụngs: High-End USB and Network DAC, Professional Studio Monitor Digital Stage, CD Player and Digital Transport, Portable Hi-Fi Headphone DAC Dongle, Television, Set-Top Box and Gaming Audio, Digital Crossover and Multi-Way Speaker Processor.
High-End USB and Network DAC
The AK4490EN is the natural centerpiece of a desktop USB or network DAC because it accepts I2S PCM data straight from an XMOS or FPGA audio engine and converts it with 32-bit resolution while decoding DSD up to 768 kHz. Place the converter behind a low-jitter clocking stage and keep the digital bus short and ground-referenced so that the 2-channel architecture can deliver its full low-distortion performance into a line-level output stage. In a streamer design the converter handles FLAC, WAV and DSD files from a common source, and the exposed pad keeps junction temperature controlled next to a dense digital section.
Được đề xuất
Professional Studio Monitor Digital Stage
Studio monitors driven from a digital source often need a converter that resolves very low level detail, and the AK4490EN's 32-bit 2-channel delta-sigma core with DSD256 (768 kHz) capability suits both monitoring and mastering playback chains. Pair it with a fully differential output buffer so that the converter's balanced capability is preserved into the power amplifier. Because the AK4490EN is a surface-mount QFN (6 x 6 mm) with an exposed pad, it fits on a compact digital board placed near the analog output connectors, shortening the analog path and reducing susceptibility to ground-loop pickup in a studio environment.
Được đề xuất
CD Player and Digital Transport
A CD transport or disc-based digital source usually presents a clean I2S stream at 44.1 kHz and 48 kHz, which the AK4490EN converts to analog with 32-bit precision and dual-channel capability. Using a dedicated high-resolution DAC in the transport keeps the analog output section independent of the transport's own converters and lets the designer select the digital filter mode and roll-off that best suits the listening environment. The QFN (6 x 6 mm) surface-mount footprint is easy to place on the transport's main board, and the exposed pad can be tied into the chassis ground structure to support a low-impedance analog return.
Được đề xuất
Portable Hi-Fi Headphone DAC Dongle
Battery-powered headphone DAC dongles need a converter that is small, efficient and quiet enough to sit under a very low noise floor. The AK4490EN delivers 32-bit 2-channel conversion in a compact QFN (6 x 6 mm) package that suits dense portable layouts, and its I2S input works directly with common low-power USB audio controllers. The exposed pad must be bonded to a solid ground pour in a layered flex or rigid-flex board so that heat leaves the die efficiently and analog returns stay short, which helps preserve the low in-band noise the converter is capable of.
Được đề xuất
Television, Set-Top Box and Gaming Audio
Consumer AV products that need better sound than an integrated codec can provide typically need a stereo DAC with a straightforward digital interface and a small footprint. The AK4490EN accepts I2S data from the main SoC audio port and outputs two analog channels, so a simple bypass of the SoC's internal converter is possible without changing the system digital architecture. Its 48-QFN (6 x 6 mm) surface-mount package also keeps the analog island compact, which matters in thin chassis where analog and switching regulators compete for board area near the display and power sections.
Được đề xuất
Digital Crossover and Multi-Way Speaker Processor
Active speakers and digital crossover boards process multiple bands before driving drivers, and a high-resolution stereo DAC can be used for the midrange and tweeter channels where detail and low distortion matter most. The AK4490EN's 32-bit word length preserves headroom through the crossover filters and its DSD256 (768 kHz) capability allows a common digital pipeline to serve both PCM and DSD sources. Place each converter on its own analog section of the board with a dedicated local ground pour and short output traces to the driver amplifier inputs, keeping switching regulator loops away from the exposed-pad region.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AK4490EN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AK4490EQ | AK4490VN |
|---|---|---|---|
| Device Type | Stereo audio DAC (32-bit delta-sigma) | Stereo audio DAC (32-bit delta-sigma) | Stereo audio DAC (32-bit delta-sigma) |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Package | 48-QFN (6 x 6 mm) with exposed pad | 48-QFN (6 x 6 mm) with exposed pad - same | 48-QFN (6 x 6 mm) with exposed pad - same |
| Resolution | 32 bit | 32 bit | 32 bit |
| Channels | 2 | 2 | 2 |
| Maximum DSD Rate | 768 kHz (DSD256) | 768 kHz (DSD256) | 768 kHz (DSD256) |
| Digital Audio Interface | I2S | I2S | I2S |
| Pin Count | 48 pins | 48 pins | 48 pins |
| Exposed Thermal Pad | Yes, exposed pad | Yes, exposed pad | Yes, exposed pad |
Bảo phân biệt quan trọng
- Native DSD256 decoding in a 32-bit stereo delta-sigma DAC (vsESS ES9038Q2M)
- Exact footprint-compatible sourcing within the same die (vsAK4490EQ)
- Simpler single-package converter versus multi-chip output architecture (vsTI PCM5122PWR)
Ghi chú thiết kế
Keep the AK4490EN digital input traces short, continuous and referenced to a solid ground plane, and route them away from the analog output nets. The I2S data, BCLK and LRCK lines should be length-matched to each other and kept clear of switching regulator inductors. Place the exposed-pad solder lands on a dedicated via array down to the ground plane so that the die has a low-impedance thermal and return path.
Separate the analog and digital supply routing into their own filtering branches, each terminated with local bulk ceramic capacitance plus a high-frequency decoupling capacitor placed within a few millimetres of the supply pins. Because the AK4490EN resolves 32-bit signals, supply noise and ripple directly limit the achievable noise floor; use low-ESR ceramics and keep the switching converter physically separated from the converter island.
Do not treat the AK4490EN as a plug-in part for any converter with a different pin count. Devices such as the ESS ES9038Q2M use a 32-pin QFN in a 5 x 5 mm body and the TI PCM5122PWR uses a TSSOP package; both are functional alternatives for a new layout but neither is a footprint-compatible replacement for a 48-QFN (6 x 6 mm) board. Also confirm the DSD versus PCM digital filter configuration in the manufacturer datasheet rather than assuming a single filter applies to both paths.
Estimated: the exposed pad is the primary heat path for the AK4490EN. With the pad bonded to a full ground pour on a four-layer board, junction temperature rise is governed by the board copper area and the pad via count; increase the via array if the converter sits next to a hot output stage. Verify with a thermal camera or thermocouple on the exposed pad during worst-case analog power dissipation, and confirm the operating temperature range in the AKM AK4490 datasheet.
Thông tin tuân thủ
The AK4490EN is a lead-free surface-mount QFN device; RoHS, REACH and halogen-free declarations for the exact orderable suffix should be confirmed with the current manufacturer material declaration, which can be requested alongside a quotation.
