APA150-FG256A - 150K Gate ProASICPlus FPGA | Microchip
MPN: APA150-FG256A ✓ Hoạt độngAPA150-FG256A Tóm tắt
A field-programmable gate array, or FPGA, is a digital integrated circuit whose logic functions are configured through programmable interconnect and configuration memory. An FPGA occupies a higher level of the programmable-logic hierarchy than a simple CPLD, combining gate-level logic resources with dedicated I/O and embedded memory. The ProASICPLUS family combines FPGA implementation flexibility with ASIC-like design-flow benefits, while its nonvolatile configuration eliminates the need for an external boot PROM in supported designs.
The APA150-FG256A provides 150,000 system gates, 186 I/O, and 36,864 RAM bits in a surface-mount 256-FPBGA package. Its supply range is listed as 2.375 V to 2.625 V, placing it in the low-voltage regime used with contemporary CMOS logic. Surface-mount construction supports dense, high-pin-count PCB designs, but the 17 x 17 mm BGA requires careful escape routing, thermal analysis, and assembly process control.
ProASICPLUS devices use nonvolatile flash technology for configuration, allowing the programmed design to remain available when power is restored. This is useful in control systems, industrial automation, communications equipment, and embedded products that must start operating without an external configuration loader. The combination of reprogrammability, 186 I/O, and embedded RAM makes the device suitable for parallel data collection, protocol handling, control logic, and general ASIC prototyping.
Typical uses include industrial factory controllers, network-interface logic, instrumentation systems, test equipment, and embedded control platforms. In each case, the 150,000-gate capacity provides more implementation space than small CPLDs, while the 186 I/O support allows the FPGA to connect directly to sensors, memory, transceivers, and parallel buses. The 36,864 RAM bits also provide on-chip storage for buffers, lookup tables, state machines, and data-pipeline stages.
PCB implementation should account for the 256-FPBGA footprint, power-grid integrity, and the difficulty of routing signals out of a dense BGA. Use the manufacturer’s pin-assignment and package documentation for every board design, and validate high-speed interfaces with signal-integrity analysis. Stable decoupling across the supply rails is essential because the specified 2.375 V to 2.625 V operating range leaves limited margin for supply excursions.
This product record combines the manufacturer’s ProASICPLUS family information with package, interface, memory, pricing, and substitute-part details. It also provides application guidance, design cautions, and a direct comparison framework for engineers evaluating same-package FPGA alternatives.
Bộ thay thế dễ dàng lắp đặt cho APA150-FG256A — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với APA150-FG256A (cùng hình factor và footprint) — khác nhau ở RoHS Status.
APA150-FG256I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →APA150-FGG256A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA150-FGG256I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA150-FG256X79
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA150-FGG256X79
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
APA150-FG256A Tỷ lệ tối đa & tính chất điện
| Device Type | ProASICPLUS field-programmable gate array (FPGA) |
| Number of System Gates | 150,000 gates |
| Number of User I/O | 186 I/O |
| Embedded RAM | 36,864 bits |
| Supply Voltage Range | 2.375 V to 2.625 V |
| Hộp | 256-FPBGA (17 x 17 mm) |
| Package Type | 256-LBGA |
| Kiểu lắp đặt | Surface mount |
| Configuration Technology | Nonvolatile flash |
| Power-Up Behavior | Live at power-up |
| Programming | Reprogrammable |
| Logic Type | FPGA logic |
| Device Family | ProASICPLUS |
| Nhiệt độ hoạt động | -40 °C to +125 °C (TA) |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân APA150-FG256A 256-lbga
Cấu hình chân cho APA150-FG256A (256-lbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho APA150-FG256A.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
APA150-FG256A phù hợp cho 6 Áp dụngs: Industrial Factory Automation, Network Interface and Protocol Bridging, Precision Instrumentation and Test Systems, ASIC Prototyping and ASIC Conversion, Embedded Control and Sensor Acquisition, Communications and Data-Routing Equipment.
Industrial Factory Automation
APA150-FG256A fits factory automation equipment that combines machine control, sensor conditioning, and communications in one programmable device. Its 150,000 system gates can accommodate multiple control state machines, while 186 I/O provide connections to sensors, actuators, encoders, and operator interfaces. The 36,864 RAM bits support local buffering and data pipelines without forcing all processing into external memory. Nonvolatile flash configuration also allows the controller to restore its operating logic immediately after power restoration. Engineers should verify timing margins and operating-temperature requirements against the selected grade before production release.
Được đề xuất
Network Interface and Protocol Bridging
APA150-FG256A can implement dedicated network-interface logic, packet buffering, and protocol translation beside a host processor. The 186 available I/O are suitable for parallel buses, control signals, and multiple data channels, while 36,864 RAM bits provide local storage for descriptors and packet staging. Its 150,000-gate capacity permits concurrent receive, transmit, framing, and status logic rather than a single narrow accelerator. For production designs, constrain interfaces to their specified voltage and timing, and use the manufacturer’s pin table to maintain deterministic routing from the 256-FPBGA package.
Được đề xuất
Precision Instrumentation and Test Systems
APA150-FG256A is appropriate for instrumentation requiring parallel acquisition, timing control, calibration tables, and a flexible user interface. Its 186 I/O can connect directly to multiplexers, converters, memory devices, and test fixtures, while 36,864 RAM bits support sample buffering and working state. The 150,000-gate scale allows measurement sequencing and data processing to share one programmable-logic platform. Because the device operates from 2.375 V to 2.625 V, power sequencing and decoupling must prevent out-of-range excursions that could affect measurement accuracy or configuration reliability.
Được đề xuất
ASIC Prototyping and ASIC Conversion
APA150-FG256A supports ASIC-prototyping workflows that require programmable logic before a final mask set is available. The 150,000 system gates and 36,864 RAM bits provide substantial logic and buffer capacity for validating parallel datapaths, control sequences, and peripheral interfaces. Its 186 I/O simplify connection to the surrounding test system and daughterboards. The nonvolatile flash architecture preserves configuration between power cycles, accelerating iterative hardware testing. Final adoption still requires formal equivalence checking between the programmable implementation and the intended ASIC netlist.
Được đề xuất
Embedded Control and Sensor Acquisition
APA150-FG256A can consolidate sensor acquisition, digital filtering, and actuator control in embedded equipment. The 186 I/O permit direct attachment to multiple digital sensors, switches, and output stages, while 36,864 RAM bits support sample queues and finite-state-machine data. Its 150,000 gates provide enough capacity for parallel channels and redundant control paths without moving every operation into software. For low-power products, account for both the FPGA’s configurable logic and external support circuitry because the listed supply range alone does not determine total system power consumption.
Được đề xuất
Communications and Data-Routing Equipment
APA150-FG256A is suitable for communications equipment requiring programmable datapaths, framing logic, and dedicated I/O. Its 150,000 gates support concurrent transmit and receive functions, while 186 I/O allow wide parallel interfaces and direct connection to transceivers. The 36,864 RAM bits can serve as channel buffers, lookup storage, or temporary packet fields. Live-at-power-up behavior supports systems that must begin operating immediately after power restoration. High-speed layouts still require controlled clock routing, terminated interfaces, and verification that selected I/O standards and timing margins meet the external link requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho APA150-FG256A — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | APA150-FG256I | APA150-FGG256A | APA150-FGG256I | APA150-FG256X79 | APA150-FGG256X79 |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-FPBGA (17 x 17 mm) | 256-FPBGA (17 x 17 mm) - same | 256-FPBGA (17 x 17 mm) - same | 256-FPBGA (17 x 17 mm) - same | 256-FPBGA (17 x 17 mm) - same | 256-FPBGA (17 x 17 mm) - same |
| System Gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates | 150,000 gates |
| User I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O | 186 I/O |
| Embedded RAM | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits | 36,864 bits |
| Configuration Technology | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
| Power-Up Behavior | Live at power-up | Live at power-up | Live at power-up | Live at power-up | Live at power-up | Live at power-up |
| Grade Suffix | FG256A | FG256I | FGG256A | FGG256I | FG256X79 | FGG256X79 |
Bảo phân biệt quan trọng
- Provides a large 186-I/O interface without changing the dense 256-FPBGA footprint (vsAPA150-FG256I)
- Combines 150,000 gates with 36,864 RAM bits in a single programmable device (vsAPA150-FGG256A)
- Uses nonvolatile flash configuration for live-at-power-up system starts (vsAPA150-FGG256I)
Ghi chú thiết kế
Treat the 256-FPBGA layout as a high-density routing problem. Use the manufacturer’s ball map for the exact ordering code, escape all supply and ground balls according to the recommended footprint, and avoid substituting a generic 256-ball land pattern without dimensional verification. A PCB stack-up with short power paths, continuous ground-plane connectivity, and via-in-pad or via-adjacent decoupling can materially improve signal and power integrity.
Keep the APA150-FG256A supply inside its listed 2.375 V to 2.625 V range under static and transient conditions. Place the required bypass capacitors adjacent to the relevant power balls, provide a low-impedance distribution network, and verify startup sequencing if neighboring devices share the rail. A nominal supply value alone is insufficient; ripple, droop, and overshoot must also remain inside the device’s supported operating envelope.
Preserve configuration and clock behavior during routing. Keep sensitive clock nets short and isolated from switching nodes, maintain continuous reference planes beneath high-speed links, and apply the manufacturer’s I/O recommendations to every external interface. Because this is a 17 x 17 mm BGA, perform post-layout signal-integrity and power-integrity checks rather than relying only on schematic connectivity to determine whether timing margins are realistic.
Do not select a replacement solely by matching the 256-LBGA package and the three headline resource counts. APA150-FG256A, APA150-FG256I, APA150-FGG256A, APA150-FGG256I, APA150-FG256X79, and APA150-FGG256X79 use suffixes that can distinguish speed, temperature, qualification, or lifecycle options. Check the manufacturer’s ordering guide, timing tables, operating-temperature limits, and tool compatibility before authorizing a drop-in substitution.
Thông tin tuân thủ
The exact APA150-FG256A listing is marked RoHS compliant. Additional REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer.