Microchip Technology

ATF22LV10CZ-25SI - 3.3V 10-Macrocell PLD | Microchip

MPN: ATF22LV10CZ-25SI ✓ Hoạt động
3.3 V Vdss 25 µA maximum Id 24-SOIC, 0.295 inch body width (7.50 mm) Package Electrically Erasable Flash memory Memory
MOQ: 1 |

ATF22LV10CZ-25SI Tóm tắt

The Microchip Technology ATF22LV10CZ-25SI is a 3.3 V electrically erasable programmable logic device with 10 macrocells, a 25 ns propagation delay, and a 24-SOIC package. It uses CMOS electrically erasable Flash memory technology and is designed for compact logic implementation where a small macrocell count and in-circuit reprogrammability are valuable. The industrial-temperature suffix identifies this version for industrial equipment, while the 24-SOIC package supports conventional surface-mount PCB assembly.

A programmable logic device, or PLD, is a semiconductor whose internal logic connections are user-programmable. The ATF22LV10 belongs to the 22V10 family and sits below field-programmable gate arrays in implementation complexity: a design can be consolidated into 10 macrocells without developing a mask-programmed ASIC. Within the semiconductor hierarchy, it is a programmable logic IC within the broader integrated-circuit and digital-semiconductor categories.

The main operating characteristics include 10 available macrocells, a nominal 25 ns device speed designation, and standby current rated at no more than 25 µA. Electrically erasable Flash memory permits the programmed configuration to be erased and rewritten during development or production. These attributes make the device useful for address decoding, control logic, state sequencing, interface glue, and compact combinational or sequential functions.

The ATF22LV10CZ uses a 3.3 V supply and retains the familiar 22V10 logic organization. Its 24-SOIC outline provides enough I/O for externally presented inputs and outputs while keeping the package compatible with established 24-pin surface-mount layouts. The electrically erasable configuration memory distinguishes it from older one-time-programmable or mask-programmed implementations, allowing the same physical device type to support firmware and logic revisions.

Typical uses include industrial controller address decoding, peripheral interface control, programmable command sequencing, and compact digital signal-processing support logic. The 10-macrocell limit is appropriate when a design requires more flexibility than a fixed gate or comparator but less capacity than a larger CPLD or FPGA. System partitioning should reserve external logic or a larger programmable device when required input, output, or macrocell counts exceed the device limits.

PCB design should follow the manufacturer pin description and recommended decoupling guidance rather than inferring connections from a generic 24-pin footprint. Place the input bypass capacitor close to the supply pins, route programming and control signals away from sensitive analog paths, and confirm that exposed PCB pads and assembly processes are compatible with the 24-SOIC outline. Device selection should also verify system timing against the 25 ns speed designation.

This product page combines the device identity, package information, technical characteristics, practical application guidance, and validated replacement considerations in one engineering-focused reference. It helps engineers identify the ATF22LV10CZ-25SI, confirm its 3.3 V 10-macrocell feature set, review the 24-SOIC footprint, and determine whether a temperature-grade or package-compatible family member is appropriate for a redesign.

Bộ thay thế dễ dàng lắp đặt cho ATF22LV10CZ-25SI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATF22LV10CZ-25SI (cùng hình factor và footprint) — khác nhau ở Device Type, Package, Temperature Grade.

Microchip Technology
Device Type: 22V10 Simple Programmable Logic Device
Package: 24-pin plastic SOIC
Temperature Grade: Commercial
So sánh với ATF22LV10CZ-25SI →

ATF22LV10CZ-25SC

✅ Drop-In
Microchip Technology
📦 24-SOIC
22V10 Simple Programmable Logic Device · 500 gates · 10 macrocells · 25 ns · 3 V to 5.5 V · 3.3 V to 5 V · Electrically erasable CMOS programmable logic · 24-pin plastic SOIC

Liên hệ để biết giá

Xem tài liệu →

ATF22LV10CZ-25SU

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 24-SOIC
Commercial-temperature ordering option with the same 10-macrocell, 25 ns, and 24-SOIC configuration.

📋 Tham chiếu thay thế (không có trong danh mục)

ATF22LV10CZ-25SI Tỷ lệ tối đa & tính chất điện

Device Type Electrically Erasable Programmable Logic Device (EE PLD)
Product Family ATF22LV10 / 22V10
Điện áp cung cấp 3.3 V
Macrocell Count 10 macrocells
Propagation Delay 25 ns
Configuration Memory Technology Electrically Erasable Flash memory
Process Technology CMOS
Standby Current 25 µA maximum
Hộp 24-SOIC, 0.295 inch body width (7.50 mm)
Số chân 24 pins
Kiểu lắp đặt Surface Mount
Terminal Form Gull Wing
Package Shape Rectangular
Temperature Grade Industrial

Hướng dẫn cấu hình chân ATF22LV10CZ-25SI rectangular

Cấu hình chân cho ATF22LV10CZ-25SI (rectangular gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân rectangular cho ATF22LV10CZ-25SI

Không có dữ liệu chân cụ thể sẵn có cho ATF22LV10CZ-25SI.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATF22LV10CZ-25SI phù hợp cho 6 Áp dụngs: Industrial Address Decoding, Peripheral Command Sequencing, Compact Digital Signal Processing Support, Programmable Interface Control, Industrial Test and Control Fixture, Legacy Control-System Retrofit.

🏭

Industrial Address Decoding

The ATF22LV10CZ-25SI fits industrial address-decoder logic when the required mapping fits within 10 macrocells. Its 25 ns propagation-delay designation supports moderate-speed control paths, while electrically erasable Flash configuration allows logic assignments to be revised during commissioning without replacing the IC. Place the device in a 24-SOIC footprint, connect the bypass capacitor close to its supply pins, and validate decoder outputs against the system timing budget. The principal design check is capacity: route additional decode functions to a larger PLD rather than overloading the available macrocells.

🔧

Peripheral Command Sequencing

The ATF22LV10CZ-25SI can implement command sequencing, mode selection, and handshake logic around slower peripherals. A 10-macrocell architecture provides enough Boolean and registered logic for compact control blocks, while the 25 ns speed class provides margin for ordinary peripheral-control timing. Its electrically erasable configuration supports revision changes in the control state machine. Validate clock-domain relationships, asynchronous input synchronization, and reset behavior in the manufacturer application guidance. Keep programming or configuration signals away from timing-sensitive traces to reduce coupling during system operation.

⚡

Compact Digital Signal Processing Support

The ATF22LV10CZ-25SI is useful for auxiliary digital signal-processing logic such as sample sequencing, threshold comparison, data routing, and interface control. Its 25 ns propagation-delay designation suits moderate-speed pipelines, while the small 24-SOIC package preserves board area compared with a larger programmable device. The 10-macrocell constraint requires careful partitioning when the support function includes extensive arithmetic or wide multiplexing. Use the manufacturer timing specifications to evaluate cascade delay, and avoid treating the nominal speed designation as a guarantee for every path without considering logic depth and package characteristics.

🌐

Programmable Interface Control

The ATF22LV10CZ-25SI can implement interface-control logic for industrial or embedded systems that require programmable chip-select behavior, protocol-state management, or multiplexing between multiple peripheral signals. Its electrically erasable Flash configuration permits functional updates without a mask change, and the 10-macrocell structure keeps moderate control functions compact. Engineers should budget fanout and propagation delay for every implemented term, then confirm signal levels and timing against the connected peripheral. A local supply bypass capacitor and short ground-return paths are important for maintaining predictable behavior across the board.

🖥️

Industrial Test and Control Fixture

The ATF22LV10CZ-25SI can implement reusable control and pattern logic in industrial test fixtures where a small, reprogrammable PLD is preferable to a discrete gate network. Electrically erasable Flash allows fixture personalities to change with the product under test, and the 25 ns speed designation is suitable for many slow control and instrumentation paths. The 10-macrocell limit keeps designs simple enough for rapid review and maintenance. Account for fixture cable delays, connector transitions, and input protection before assuming the laboratory timing matches the device specification. Industrial-temperature operation supports controlled manufacturing environments.

🏗️

Legacy Control-System Retrofit

The ATF22LV10CZ-25SI can serve as a compact logic element when modernizing a legacy control board that needs revised decoding or sequencing but cannot accept a large footprint change. Its 24-SOIC package and 10-macrocell architecture align with established 22V10 designs, while electrically erasable configuration enables controlled logic updates. Compatibility must be checked at the pin, voltage, timing, and configuration level rather than by footprint alone. Preserve the original power sequencing, clocking, and programming approach, and validate every replaced connection against the manufacturer pin description before production deployment.

What is the ATF22LV10CZ-25SI?
The ATF22LV10CZ-25SI is a 3.3 V, 10-macrocell electrically erasable programmable logic device from Microchip Technology. According to the Atmel datasheet, it uses CMOS electrically erasable Flash memory technology, provides a 25 ns speed designation, and is packaged in a 24-SOIC. The device is intended for compact industrial logic designs that benefit from user-programmable configurations.
What are the key specifications of ATF22LV10CZ-25SI that engineers should know?
The ATF22LV10CZ-25SI combines a 3.3 V supply, 10 macrocells, a 25 ns propagation-delay designation, and a 24-SOIC package. According to the Atmel datasheet, it also uses electrically erasable Flash configuration memory and has a maximum standby current of 25 µA. These characteristics position it between simple fixed logic and larger CPLD or FPGA implementations for compact control, decoding, and sequencing functions.
Where can I download the ATF22LV10CZ-25SI datasheet PDF?
The ATF22LV10CZ-25SI datasheet PDF is available from the manufacturer-documentation link on this page and identifies the device as a high-performance CMOS electrically erasable programmable logic device. It documents the 25 ns speed, Flash-memory configuration technology, 24-SOIC option, electrical characteristics, pin assignments, and operating recommendations. Use the pin-description table and recommended application circuit when laying out a replacement board.
Where can I find the ATF22LV10CZ-25SI pinout?
The ATF22LV10CZ-25SI pinout is defined in the manufacturer datasheet rather than by the generic 24-SOIC outline. Review the pin-description table before assigning supply, ground, clock, input, output, programming, and configuration-control connections. A 24-pin footprint alone does not establish electrical compatibility because different PLD families can use the same mechanical package for unrelated functions.
Is ATF22LV10CZ-25SI suitable for industrial control applications?
The ATF22LV10CZ-25SI is identified as an industrial-temperature-grade 22V10 PLD and is suitable for industrial control logic when the system voltage, timing, and temperature requirements remain within the device limits. Its 10 macrocells support address decoding, state sequencing, and peripheral-control functions. Verify the exact operating-temperature range and electrical limits in the manufacturer datasheet before releasing a production design.
ATF22LV10CZ-25SI vs ATF22LV10CZ-25SC — which should I choose?
Choose ATF22LV10CZ-25SI for industrial-temperature applications and ATF22LV10CZ-25SC when commercial-temperature operation is acceptable. Both are identified as 22V10 devices with 10 macrocells, 25 ns speed, and 24-SOIC packaging, so the primary selection distinction is temperature grade. Confirm the manufacturer markings and ordering information before treating either device as a substitute.
What can replace ATF22LV10CZ-25SI?
The closest documented replacements are pin-compatible ATF22LV10CZ family members in the same 24-SOIC package with the same 10-macrocell architecture and 25 ns speed. ATF22LV10CZ-25SC is a commercial-temperature alternative, while ATF22LV10CZ-25SU is another same-package ordering option. The industrial temperature grade is the principal factor to verify when replacing the ATF22LV10CZ-25SI.
Is ATF22LV10CZ-25SI the same as ATF22LV10CZ-25SC?
The ATF22LV10CZ-25SI and ATF22LV10CZ-25SC share the 22V10 architecture, 10 macrocells, 25 ns speed designation, and 24-SOIC package, but their ordering suffixes indicate different temperature grades. The SI version is industrial, while the SC version is commercial. They are therefore closely related drop-in candidates only when the lower temperature grade of the SC device is acceptable.
What is the best Microchip equivalent for ATF22LV10CZ-25SI?
The best same-family equivalent is the ATF22LV10CZ-25SC when commercial-temperature operation is acceptable and the same 24-SOIC footprint is required. Both parts retain the 10-macrocell 22V10 organization and 25 ns speed designation. No independently documented cross-brand equivalent was established with sufficient package and parameter evidence, so changing manufacturers would require a separate engineering qualification.
When should I choose ATF22LV10CZ-25SI over another PLD?
Choose ATF22LV10CZ-25SI when a design needs up to 10 macrocells, a 25 ns speed class, 3.3 V operation, and a compact 24-SOIC implementation with erasable configuration memory. Select a larger CPLD or FPGA when the design exceeds the macrocell or I/O limits. Select ATF22LV10CZ-25SC only when its commercial temperature grade covers the deployment environment.
Is ATF22LV10CZ-25SI suitable for address decoding and control logic?
The ATF22LV10CZ-25SI is suitable for compact address decoding, command sequencing, and peripheral-control logic when its 10 macrocells are sufficient. A 25 ns propagation-delay designation allows straightforward implementation of moderate-speed control paths, while electrically erasable Flash permits configuration updates without replacing the device. System timing should still be checked against the required clock frequency and output-valid delay.
How much standby current does ATF22LV10CZ-25SI use?
The ATF22LV10CZ-25SI has a maximum standby current of 25 µA according to the Atmel datasheet. This low standby specification supports designs where the programmable logic device remains powered while the surrounding system is inactive. The figure applies to standby conditions; active current and transition behavior should be evaluated separately from the maximum standby specification.
Where to buy ATF22LV10CZ-25SI online?
Use the Request a Quote form on this page to request ATF22LV10CZ-25SI availability, current lead time, and order handling. The form is the appropriate route for an exact 24-SOIC industrial-grade ordering code and helps avoid mismatches with commercial-temperature, PDIP, or TSSOP variants. Confirm the requested MPN on the quotation before placing an order.
What is the price of ATF22LV10CZ-25SI?
Current pricing for ATF22LV10CZ-25SI is presented through the Request a Quote form on this page. Submit the exact MPN ATF22LV10CZ-25SI and your required quantity to obtain a current quotation, including any quantity-break structure or sourcing lead time. Confirm that any returned quotation references the 24-SOIC industrial-temperature version rather than a different package or temperature suffix.
What is the lead time for ATF22LV10CZ-25SI?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on quantity, inventory position, and the exact package and temperature suffix, so request a quotation for ATF22LV10CZ-25SI specifically. A stocking plan should also allow for programming, incoming inspection, and board assembly rather than relying only on component delivery time.

Dữ liệu tham khảo kỹ thuật cho ATF22LV10CZ-25SI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ATF22LV10CZ-25SI for a compact 3.3 V design that requires up to 10 macrocells, a 25 ns speed class, electrically erasable configuration memory, and a 24-SOIC footprint in an industrial-temperature environment. ATF22LV10CZ-25SC is the closest drop-in alternative when commercial-temperature operation is sufficient, but it is not a functional choice for deployments that require industrial temperature coverage. ATF22LV10CZ-25SU is another same-family package-compatible option whose exact ordering characteristics must be confirmed before substitution. Move to a larger CPLD or FPGA when logic depth, macrocell count, clock rate, I/O count, or memory requirements exceed the 22V10 architecture. For any redesign, verify voltage, temperature, pin functions, programming procedure, timing, and configuration technology rather than relying on the SOIC outline alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATF22LV10CZ-25SC ATF22LV10CZ-25SU
Brand Microchip Technology Microchip Technology Microchip Technology
Package 24-SOIC 24-SOIC 24-SOIC
Product Family ATF22LV10 / 22V10 ATF22LV10 / 22V10 ATF22LV10 / 22V10
Supply Voltage 3.3 V 3.3 V 3.3 V
Macrocell Count 10 macrocells 10 macrocells 10 macrocells
Propagation Delay 25 ns 25 ns 25 ns
Temperature Grade Industrial Commercial Commercial
Configuration Memory Electrically Erasable Flash Electrically Erasable Flash Electrically Erasable Flash

Bảo phân biệt quan trọng

  • Industrial temperature grade within the same 22V10 package family (vsATF22LV10CZ-25SC)
  • Reprogrammable Flash configuration in a compact 24-SOIC implementation (vsATF22V10C-15SC)
  • Focused 10-macrocell implementation (vsGAL16V8B-25LP)

Ghi chú thiết kế

Treat the 24-SOIC outline as a mechanical framework, not a complete connection guide. Before assigning PCB tracks, cross-check every power, ground, clock, input, output, programming, and configuration-control connection against the manufacturer pin-description table. Confirm exposed-pad requirements, courtyard clearance, solder-paste geometry, and assembly-process constraints for the exact ordering code. A mechanically similar PLD can use the same 24-pin package while presenting a different pin function, so footprint matching alone does not establish drop-in compatibility.

Place the supply bypass capacitor adjacent to the device power and ground pins and keep the loop between the capacitor and IC as short as practical. Follow the capacitor value, voltage rating, and placement recommendations in the manufacturer application circuit. Because the ATF22LV10CZ-25SI is a CMOS programmable-logic device, stable local supply and ground-return paths help prevent configuration or logic errors during switching. Do not infer active current requirements from the 25 µA standby-current specification; use the datasheet operating-current limits for power-budget calculations.

Do not select a replacement solely by matching the 24-SOIC package and 25 ns speed. First confirm 3.3 V operation, 10 macrocells, the 22V10 pin arrangement, programming method, configuration architecture, and required temperature grade. The commercial-temperature ATF22LV10CZ family alternatives can be unsuitable for a deployed industrial product even though their footprint and core timing match. Also avoid assuming that a different ATF22V10 suffix has the same Flash-memory behavior, speed rating, supply voltage, or package construction.

Keep clock and high-speed control routes short, and return programming or configuration signals to quiet logic regions of the board. Use the manufacturer timing specifications to establish setup, hold, and output-valid requirements rather than assuming every path has the same 25 ns delay. When synchronizing external asynchronous signals into the PLD, use the recommended synchronizing structure and verify that added logic depth remains within the available macrocell and timing budget. This prevents intermittent failures that are easily mistaken for configuration errors.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The ATF22LV10CZ-25SI is a general-purpose industrial-temperature PLD; automotive qualification is not indicated. Use the manufacturer product and material declarations for current compliance confirmation.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATF22LV10CZ-25SI datasheet ATF22LV10CZ-25SI pinout ATF22LV10CZ-25SI datasheet pdf ATF22LV10CZ-25SI equivalent ATF22LV10CZ-25SI replacement ATF22LV10CZ-25SI cross reference ATF22LV10CZ-25SI 24-SOIC ATF22LV10CZ-25SI 10 macrocell ATF22LV10CZ-25SI 25 ns ATF22LV10CZ-25SI vs ATF22LV10CZ-25SC ATF22LV10CZ-25SI application circuit ATF22LV10CZ-25SI price Microchip ATF22LV10CZ-25SI

Các bộ phận và thuật ngữ liên quan

Microchip Technology Atmel ATF22LV10CZ-25SI ATF22LV10CZ-25SC ATF22LV10CZ-25SU ATF22LV10 ATF22V10C-15SC GAL16V8B-25LP ATF16V8CZ-15XC ATF16LV8C-10JU ATF22LV10C-10SU Programmable Logic Device PLD Electrically Erasable Programmable Logic Device EE PLD CPLD FPGA CMOS Electrically Erasable Flash Memory 24-SOIC SOIC package family Surface Mount SMD 10 macrocells 25 ns propagation delay 3.3 V supply 25 µA standby current Industrial temperature grade Address decoding Peripheral interface control Digital signal processing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ