ATMXT112S-MAUR - 112-Node maXTouch Touch Controller | Microchip
MPN: ATMXT112S-MAUR ✓ Hoạt độngATMXT112S-MAUR Tóm tắt
A capacitive touch controller is a mixed-signal IC that measures tiny capacitance changes on a touch sensor grid, converts them into touch coordinates, and communicates them to a host processor. In the system hierarchy, a touchscreen controller sits between the touch sensor (ITO pattern on glass or film) and the host MCU or application processor, forming part of the human-machine interface subsystem alongside display drivers and haptic feedback devices.
Key features of the ATMXT112S-MAUR include its 112-node sensing matrix for dense electrode layouts, the maXTouch S-Series architecture optimized for small displays up to 3.5 inches, and an advanced noise mitigation system that rejects interference from display drivers and chargers. The device integrates acquisition logic and post-processing, offloading touch detection from the host CPU.
Technically, the maXTouch S-Series uses a proprietary acquisition engine with mutual-capacitance scanning and built-in self-calibration. Configuration data is stored on-chip in nonvolatile memory, and communication with the host uses an I2C-compatible interface. The device supports moisture and gloved-finger handling modes and provides robust reporting rates for responsive user interfaces.
Typical applications include feature phone touchscreens, handheld game consoles, digital still cameras, portable GPS navigation devices, and small industrial HMI panels. Any battery-powered product with a 3.5-inch or smaller capacitive display benefits from the low-power touch wake-up and high noise immunity.
Design consideration: because touch performance depends strongly on the sensor pattern and panel stack-up, use Microchip's maXTouch configuration tooling and reference sensor designs; improper grounding near display VCOM lines is the most common source of false touches.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho ATMXT112S-MAUR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATMXT112S-MAUR (cùng hình factor và footprint) — khác nhau ở Manufacturer, Max Screen Size, Noise Mitigation, Sensing Technology.
ATMXT112S-MAUR024
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATMXT112S-MAUR021
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATMXT112S-MAUR013
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATMXT112S-MAUR Thông số kỹ thuật
| Product Type | Capacitive Touchscreen Controller |
| Family | maXTouch S-Series (mXT112S) |
| Touch Sensing Nodes | 112 |
| Sensing Technology | Mutual capacitance (projected capacitive) |
| Max Screen Size | 3.5 inch |
| Giao diện | I2C-compatible |
| Noise Mitigation | Integrated advanced noise mitigation system |
| Configuration Memory | On-chip nonvolatile memory |
| Hộp | 32-UQFN (4x4 mm) |
| Kiểu lắp đặt | Surface Mount |
| Packaging | Reel (TR) |
| Status | Active |
Hướng dẫn cấu hình chân ATMXT112S-MAUR 32-uqfn (4x4 mm)
Cấu hình chân cho ATMXT112S-MAUR (32-uqfn (4x4 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ATMXT112S-MAUR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATMXT112S-MAUR phù hợp cho 6 Áp dụngs: Feature Phone Touchscreens, Handheld Game Consoles, Digital Still Cameras, Portable GPS Navigation Devices, Small Industrial HMI Panels, POS and Handheld Terminals.
Feature Phone Touchscreens
The ATMXT112S-MAUR is purpose-built for feature phone displays up to 3.5 inches, where its 112 mutual-capacitance nodes resolve dense ITO electrode patterns at smartphone-like responsiveness. The on-chip acquisition engine and post-processing offload touch detection entirely from the host baseband processor, reporting coordinates over I2C at rates suitable for smooth gesture tracking. Its integrated noise mitigation rejects interference from LCD drivers and charging circuits typical of handsets. Placed directly behind the sensor with short sensor traces and a solid ground reference, the device supports multi-touch gestures, moisture rejection, and gloved-finger operation, enabling a modern user experience in cost-sensitive handsets.
Được đề xuất
Handheld Game Consoles
Portable game consoles demand fast, accurate multi-touch with low latency; the ATMXT112S-MAUR delivers this with its 112-node matrix scan and S-Series reporting pipeline, giving end users a smartphone-like interface as stated by Microchip. The controller's built-in self-calibration adapts to varying panel stack-ups across production units, while its noise mitigation system keeps touch tracking stable near backlight inverters and wireless modules. Connected to the console's application processor via I2C with interrupt signaling, it supports simultaneous multi-finger input for gameplay. Its compact 32-UQFN (4x4 mm) package fits the tight PCB real estate typical of handheld gaming hardware.
Được đề xuất
Digital Still Cameras
Digital still cameras benefit from the ATMXT112S-MAUR's 112-node capacitive sensing on 3.5-inch or smaller LCD touch panels, enabling tap-to-focus and gesture menus. The device's low-power acquisition modes conserve battery life, an essential criterion in camera products, while its noise immunity maintains reliable touch detection adjacent to the camera's display driver and image-processing SoC. Configuration stored in on-chip nonvolatile memory simplifies manufacturing because no external configuration host is required at power-up. Designers should route sensor lines away from the image sensor and flash charge circuitry, leveraging the controller's shielding and filtering options documented in the maXTouch configuration guidance.
Được đề xuất
Portable GPS Navigation Devices
GPS navigation units are listed by Microchip as a primary target for the mXT112S: the ATMXT112S-MAUR provides 112 sensing nodes and robust noise mitigation, which is critical because GNSS receivers are sensitive to digital noise and touch scanning must coexist with the navigation display. The controller reports stable coordinates over I2C even when the device is sunlit, warm, or powered from a noisy automotive charger, thanks to its adaptive filtering. Its 32-UQFN (4x4 mm) surface-mount package suits the compact, thermally constrained boards of PND hardware, and gloved-finger support matches outdoor usage scenarios of motorcycle and marine GPS products.
Được đề xuất
Small Industrial HMI Panels
Compact industrial human-machine interface panels with 3.5-inch capacitive touchscreens can use the ATMXT112S-MAUR as the touch front end ahead of an MCU such as the ATMEGA64M1 family. The controller's 112 nodes support fine-grained button and slider regions, while integrated noise mitigation ensures reliable operation near motor drives, relays, and switching power supplies common on factory floors. Its self-calibrating acquisition and on-chip configuration memory eliminate host-side touch tuning, shortening commissioning time. Designers should provide a clean analog supply, solid ground plane, and shielded sensor traces per the maXTouch layout guidance to achieve EMI robustness consistent with industrial environments.
Được đề xuất
POS and Handheld Terminals
Point-of-sale terminals and handheld data-collection devices use small capacitive displays where the ATMXT112S-MAUR's 112-node matrix and moisture rejection deliver dependable touch input for payment and inventory workflows. The I2C host interface integrates cleanly with payment SoCs, and the controller's interrupt-driven reporting minimizes host polling overhead, extending battery life in mobile terminals. Its noise mitigation handles interference from thermal printer motors, wireless radios, and charging docks. The 32-UQFN (4x4 mm) package with tape-and-reel delivery supports automated high-volume assembly, and firmware-suffix variants allow OEMs to standardize on one footprint across multiple product configurations.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATMXT112S-MAUR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATMXT112S-MAUR024 | ATMXT112S-MAUR021 | ATMXT112S-MAUR013 |
|---|---|---|---|---|
| Package | 32-UQFN (4x4 mm) | 32-UQFN (4x4 mm) - same | 32-UQFN (4x4 mm) - same | 32-UQFN (4x4 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Touch Sensing Nodes | 112 | 112 | 112 | 112 |
| Family / Architecture | maXTouch S-Series (mXT112S) | maXTouch S-Series (mXT112S) | maXTouch S-Series (mXT112S) | maXTouch S-Series (mXT112S) |
| Host Interface | I2C-compatible | I2C-compatible | I2C-compatible | I2C-compatible |
| Max Screen Size | 3.5 inch | 3.5 inch | 3.5 inch | 3.5 inch |
| Factory Firmware Suffix | MA (base) | 024 variant | 021 variant | 013 variant |
Bảo phân biệt quan trọng
- Official long-term path: Microchip-designated successor (vsATMXT144U)
- 112-node matrix in a compact 32-UQFN (4x4 mm) (vsATMXT112S-MAUR024)
- Integrated noise mitigation system (vsATMXT112S-MAUR021)
Ghi chú thiết kế
Route sensor transmit/receive traces as short, matched, and away from display VCOM and switching-regulator nodes. The ATMXT112S-MAUR's noise mitigation compensates for moderate display noise, but layout quality still dominates baseline SNR: use a solid ground plane under the sensor flex/PCB, keep sensor traces on inner layers with ground guard where possible, and follow Microchip's maXTouch sensor design guidance for trace pitch and shielding. Provide the recommended decoupling on the analog supply pin directly at the 32-UQFN pads with a low-ESR ceramic capacitor.
Firmware/configuration suffixes matter: ATMXT112S-MAUR, -MAUR024, and -MAUR021 are the same die but may ship with different factory configurations, which changes sensitivity thresholds and reporting behavior. When substituting, verify the embedded configuration matches your sensor pattern, or plan to reflash configuration via the I2C interface using Microchip's maXTouch tooling. Also confirm the I2C address does not conflict with other devices on the bus, and power up the touch controller before or together with the display to avoid spurious touch reports during panel settle.
Estimated: for battery products, enable the controller's low-power doze/deep-sleep scanning between touches; the dominant average current is set by the scanning duty cycle rather than the core supply. Keep the analog supply separated from display LED boost converters, since touch threshold drift under supply ripple is the most common field complaint in small handheld designs. Use a dedicated LDO or ferrite bead filter if the touch controller shares a rail with the display driver, and measure noise at the controller's supply pin under full display brightness during validation.
Thông tin tuân thủ
Compliance details not explicitly stated in provided web data; Microchip generally ships RoHS-compliant commercial parts, but confirm on the official product page before production.
