ATTINY28L-4PU - 4MHz 8-Bit AVR MCU | Microchip Technology
MPN: ATTINY28L-4PU ✓ Hoạt độngATTINY28L-4PU Tóm tắt
An 8-bit AVR microcontroller is a programmable semiconductor that combines a CPU core, memory, and peripherals on one integrated circuit. The ATTINY28 belongs to the ATtiny family within the AVR microcontrollers hierarchy, where the core supports single-clock-cycle instruction execution and uses 32 general-purpose registers. Compared with larger AVR devices, it emphasizes a compact instruction set, low-power operation, and a modest memory footprint rather than extensive connectivity or high pin count.
Key features include 2 KB of programmable Flash, 32 general-purpose registers, a keyboard interrupt function, and an analog comparator. The specified clock rate is 4 MHz, allowing the processor to execute up to four million instruction cycles per second under the architecture's stated operating conditions. A 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V embedded systems, although timing and peripheral limits must be checked against the selected operating voltage in the manufacturer datasheet.
The part uses the low-power CMOS AVR architecture and provides a combination of digital I/O, analog comparison, and interrupt support in a through-hole PDIP package. Its 28-pin package is approximately 0.300 inches wide with a 7.62 mm lead pitch, making it convenient for prototypes, educational systems, and through-hole industrial controllers. Unlike surface-mount variants, the PDIP format is easy to insert and replace with standard breadboards or sockets.
Typical applications include keyboard scanners, simple remote controls, small standalone instruments, analog threshold detection, embedded timers, and low-power control boards. The analog comparator is useful when a design needs a simple switching threshold without allocating a larger mixed-signal microcontroller. The 2 KB Flash capacity is appropriate for compact control routines rather than graphical interfaces, networking stacks, or applications with substantial data storage requirements.
When designing around the ATTINY28L-4PU, verify the complete pin description, clock requirements, reset behavior, and peripheral limits in the manufacturer datasheet before assigning PCB tracks. Keep the AVR programming interface accessible, provide a stable supply and decoupling arrangement, and use the documented reset strategy. Confirm that 2 KB of program memory remains sufficient for the final bootloader, application code, and interrupt routines.
This product summary combines the manufacturer's family-level architecture details with package, memory, voltage, and clock information for the exact ATTINY28L-4PU order code. It also organizes compatible same-family alternatives, comparison points, and practical design guidance so engineers can assess PCB reuse, timing differences, and legacy-product constraints before committing a design to production.
Bộ thay thế dễ dàng lắp đặt cho ATTINY28L-4PU — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATTINY28L-4PU (cùng hình factor và footprint) — khác nhau ở Maximum Clock Frequency, Operating Voltage Range.
ATTINY28L-4PC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATTINY28-4PU
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ATTINY28L-4AC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATTINY28L-4AU
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ATTINY28V-1PU
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ATTINY28L-4PU Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 8-bit AVR RISC microcontroller |
| Tần số xung maksimum | 4 MHz |
| Maximum Throughput | 4 MIPS |
| Program Memory | 2 KB Flash |
| Flash Organization | 1K x 16 bits |
| General-Purpose Registers | 32 registers |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Architecture | Low-power CMOS AVR |
| Integrated Analog Comparator | Yes |
| Keyboard Interrupt | Yes |
| Package Type | 28-pin PDIP |
| Package Width | 0.300 inch (7.62 mm) |
| Lead Pitch | 7.62 mm |
| Total Pin Count | 28 pins |
| Kiểu lắp đặt | Through-hole |
| Order Code Packaging | Tube |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân ATTINY28L-4PU 0.300 inch (7.62 mm)
Cấu hình chân cho ATTINY28L-4PU (0.300 inch (7.62 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho ATTINY28L-4PU.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ATTINY28L-4PU phù hợp cho 6 Áp dụngs: Keyboard and Matrix Input Controller, Low-Power Standalone Control Module, Analog Threshold and Comparator Control, Small Remote and Panel Controller, Simple Timing and Sequence Controller, Educational and Rapid-Prototype Controller.
Keyboard and Matrix Input Controller
The ATTINY28L-4PU is well suited to small keypad scanners because the manufacturer identifies a dedicated keyboard interrupt alongside 32 general-purpose registers and a 4 MHz clock. A scanning loop can detect key changes, debounce contacts, and update an indicator or downstream control signal without requiring a larger MCU. Its 2.7 V to 5.5 V operating range allows operation from either 3.3 V or 5 V rails. The main design limit is the 2 KB Flash capacity, so compact interrupt routines and compact state-machine code are important. Confirm the external I/O count and the exact 28-pin PDIP pin assignment before laying out the matrix.
Được đề xuất
Low-Power Standalone Control Module
The ATTINY28L-4PU fits compact, battery-conscious control modules where an 8-bit processor and 2 KB of Flash are sufficient. Its low-power CMOS AVR architecture supports embedded control tasks at up to 4 MHz, while the 2.7 V minimum supply voltage permits operation from common low-voltage cells or regulated rails. The device can coordinate a timer, digital inputs, and a simple output state without the memory overhead of a larger microcontroller. Because exact sleep currents, SRAM, and watchdog settings are not stated on the product page, engineers should consult the manufacturer datasheet and measure the complete module's standby behavior before defining a battery-life target.
Được đề xuất
Analog Threshold and Comparator Control
The integrated analog comparator makes the ATTINY28L-4PU useful for simple threshold detection, such as monitoring a sensor-derived voltage or detecting a line level. The comparator can generate an interrupt while the AVR core performs control logic, reducing the need for a dedicated external comparator in straightforward applications. Running at 4 MHz gives the firmware enough response capability for common debounce and state-management tasks, and the 2.7 V to 5.5 V range accommodates both 3.3 V and 5 V analog systems. The comparator's input range, offset, and switching performance must be checked in the manufacturer datasheet before the signal path is finalized.
Được đề xuất
Small Remote and Panel Controller
The ATTINY28L-4PU can implement a compact panel controller that reads switches, drives indicators, and maintains a small state machine. Its 28-pin PDIP package is particularly convenient for through-hole prototypes, sockets, and educational assemblies, while the 4 MHz clock supports responsive debounce and menu logic. The 2 KB Flash limit favors direct I/O control over large application frameworks or extensive stored data. A practical design should isolate long debounce intervals with timer-based interrupts and avoid adding communication stacks that would exceed the available program memory. Verify programming access and external interrupt routing using the manufacturer pin-description table.
Được đề xuất
Simple Timing and Sequence Controller
The ATTINY28L-4PU is suitable for deterministic sequencing tasks such as relay timing, step sequencing, periodic sampling, or multi-stage actuator control. The 4 MHz clock supports faster polling and interrupt servicing than the 1 MHz ATTINY28V-1PU, while the 32 general-purpose registers provide working space for counters and state variables. Its 2 KB of Flash is adequate for compact routines but not for elaborate user interfaces or large lookup tables. Use the manufacturer timer and interrupt documentation to select prescaler values, account for instruction timing, and structure the firmware so worst-case execution time does not delay a critical output.
Được đề xuất
Educational and Rapid-Prototype Controller
The ATTINY28L-4PU works well for educational AVR projects because it combines a recognizable 8-bit RISC core, 2 KB of Flash, a 4 MHz clock, and a through-hole 28-pin package. Students can implement timers, interrupt handlers, keyboard scanning, and comparator experiments without adopting a fine-pitch surface-mount footprint. The 7.62 mm lead pitch also makes prototype-board assembly and socket-based experimentation straightforward. Because the program-memory capacity is limited, demonstration code should be modular and concise, with final logic checked against the available 2 KB. The exact programming connector and reset arrangement should follow the manufacturer documentation rather than relying on a generic board layout.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ATTINY28L-4PU — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ATTINY28L-4PC | ATTINY28-4PU | ATTINY28L-4AC | ATTINY28L-4AU | ATTINY28V-1PU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin PDIP | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same | 28-pin PDIP - same |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 1 MHz |
| Processor Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Program Memory | 2 KB Flash | 2 KB Flash | 2 KB Flash | 2 KB Flash | 2 KB Flash | 2 KB Flash |
Bảo phân biệt quan trọng
- Higher clock rate than the 1 MHz ATTINY28V-1PU (vsATTINY28V-1PU)
- Exact key-rating match in the same 28-pin PDIP family (vsATTINY28L-4PC)
- Maintains the 4 MHz clock and 28-pin package (vsATTINY28V-1PU)
Ghi chú thiết kế
Route the AVR programming signals, reset connection, supply pins, and decoupling capacitor exactly according to the manufacturer pin-description and layout guidance. The ATTINY28L-4PU uses a 28-pin PDIP footprint with 7.62 mm lead pitch, so lead spacing is forgiving, but signal integrity still depends on keeping sensitive programming and analog-comparator routes away from noisy sources. Place the decoupling capacitor close to the device's supply pins and provide a stable return path for every ground connection.
Design the supply for the 2.7 V to 5.5 V operating range and confirm that the clock target remains valid at the selected voltage. A 5 V rail gives the ATTINY28L-4PU its identified 4 MHz operating point, while lower-voltage operation requires the corresponding timing conditions to be checked. Avoid feeding external signals above the device's permitted pin voltage, and use a regulator or clamp arrangement where an external signal can exceed the selected supply rail.
Do not assume that all ATTINY28 suffixes are interchangeable merely because their packages look alike. Speed grade, low-power designation, temperature grade, packaging, and lifecycle status can change under the same family name. Compare the complete order code against the manufacturer ordering information, then verify that firmware timing, programming voltage, reset behavior, and interrupt assignments remain valid on the selected replacement.
Keep the 2 KB Flash constraint visible during firmware planning. Use compact interrupt handlers, avoid unnecessary library calls, and reserve program space for future corrections rather than filling the device completely during prototyping. For keyboard or comparator inputs, route signals away from switching nodes and maintain consistent grounding. If the board includes an ISP programming connector, position it to remain accessible after assembly and provide a defined programming reset path.
Thông tin tuân thủ
RoHS compliance is identified for the ATTINY28L-4PU product listing. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is provided.