Broadcom

BCM53107MIMMLG - 7-Port FE Switch with EEE | Broadcom

MPN: BCM53107MIMMLG ✓ Hoạt động
MOQ: 1 |

BCM53107MIMMLG Tóm tắt

The Broadcom BCM53107MIMMLG is a seven-port Fast Ethernet switch with Energy Efficient Ethernet (EEE), supplied under the MIMMLG ordering designation. It belongs to the Ethernet switch controller and interface-controller hierarchy, where integrated switching combines multiple Fast Ethernet ports with managed traffic-handling functions on a single semiconductor device. The confirmed product description identifies this device as a seven-port FE switch with EEE, positioning it for compact Ethernet aggregation, industrial networking, and embedded communications equipment.

An Ethernet switch controller is a semiconductor that connects multiple network nodes through integrated physical-layer and switching resources. Unlike a simple Ethernet transceiver, a switch controller can provide shared connectivity, port management, and energy-saving behavior when linked with compatible PHY and magnetics circuitry. EEE allows an established Fast Ethernet link to enter a low-power operating state when traffic is idle, reducing energy consumption without removing the link from service.

The BCM53107MIMMLG's seven-port architecture makes it useful where several 10/100-Mb Ethernet endpoints must be consolidated behind a common switching fabric. Its role is especially relevant in embedded routers, access equipment, building-control systems, and industrial controllers where a small number of copper Ethernet ports is preferable to a collection of discrete interfaces. Because switch behavior depends on surrounding PHY, magnetics, clock, and board-design support, system-level interoperability must be validated against the manufacturer's hardware guidance.

Broadcom's BCM53107 family belongs to a broader product progression from isolated Ethernet PHYs to integrated multi-port interface controllers. The seven-port FE switch configuration offers a practical balance between port density and implementation complexity for compact network equipment. It can serve as the central Ethernet switching element in a platform that also handles management, protocol processing, or embedded-host connectivity through other devices.

Typical implementations include industrial Ethernet gateways, surveillance-system concentrators, building-automation controllers, compact network appliances, and embedded communication platforms. In each case, the switch can consolidate several Fast Ethernet links while EEE supports lower idle power. A practical design must preserve correct high-speed trace geometry, provide suitable termination and clocking, and implement the power and interface recommendations associated with the Broadcom device family.

A key implementation consideration is that the BCM53107MIMMLG is a switching and interface component rather than a complete standalone Ethernet endpoint. Its application value depends on matching external PHY or magnetics arrangements, validating auto-negotiation behavior, and confirming firmware-level port management. This page combines the confirmed product identity, sourcing workflow, drop-in-family analysis, and practical integration guidance to support component selection before the detailed datasheet is downloaded.

This page also organizes the device's sourcing questions, package limitations, family alternatives, and design trade-offs into an engineering-focused reference. Buyers can request current availability and lead time through the Request a Quote form on this page, while designers should use the manufacturer datasheet for the authoritative pin description, electrical limits, timing characteristics, and reference circuit.

Bộ thay thế dễ dàng lắp đặt cho BCM53107MIMMLG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

BCM53106MIMMLG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 MIMMLG
Same MIMMLG family package; lower-port configuration is expected, requiring port-count and pin-assignment review

📋 Tham chiếu thay thế (không có trong danh mục)

BCM53105MIMMLG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 MIMMLG
Same MIMMLG family package; reduced Fast Ethernet port configuration versus seven ports

📋 Tham chiếu thay thế (không có trong danh mục)

BCM53104MIMMLG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 MIMMLG
Same MIMMLG family package; fewer Fast Ethernet ports and different management requirements must be checked

📋 Tham chiếu thay thế (không có trong danh mục)

BCM53103MIMMLG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 MIMMLG
Same MIMMLG family package; lower port density requires port mapping and functional validation

📋 Tham chiếu thay thế (không có trong danh mục)

BCM53102MIMMLG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 MIMMLG
Same MIMMLG family package; reduced switching and port functionality versus the seven-port target

📋 Tham chiếu thay thế (không có trong danh mục)

BCM53107MIMMLG Tỷ lệ tối đa & tính chất điện

Product Type 7-port FE switch with EEE
Device Category Interface controller
Number of Fast Ethernet Ports 7 ports
Ethernet Feature Energy Efficient Ethernet (EEE)
Manufacturer Broadcom
Ordering Designation BCM53107MIMMLG

Hướng dẫn cấu hình chân BCM53107MIMMLG standard

Cấu hình chân cho BCM53107MIMMLG (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân standard cho BCM53107MIMMLG

Không có dữ liệu chân cụ thể sẵn có cho BCM53107MIMMLG.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

BCM53107MIMMLG phù hợp cho 6 Áp dụngs: Industrial Ethernet Gateway, Building Automation Controller, Surveillance Network Concentrator, Compact Network Appliance, Embedded Communications Platform, Access Equipment Aggregator.

🏭

Industrial Ethernet Gateway

The BCM53107MIMMLG fits an industrial gateway that must collect several Fast Ethernet endpoints before forwarding traffic to an embedded controller or uplink. Its seven-port FE switch with EEE architecture consolidates local links while allowing compatible idle links to reduce switching-system power consumption. The device should be implemented with the PHY, magnetics, clocking, and isolation arrangement specified in the Broadcom reference design. Engineers should validate port-by-port auto-negotiation, link-failure behavior, and management requirements in the target industrial network, especially where temperature, vibration, or uninterrupted service affect qualification.

🧩

Building Automation Controller

The BCM53107MIMMLG can form the local Ethernet switching section of a building-automation controller serving HVAC panels, room controllers, access equipment, and sensors. Seven Fast Ethernet ports provide useful port density for a compact panel, while EEE support can reduce idle-link power in facilities with intermittent traffic. The controller implementation must accommodate the isolation and filtering needs of commercial building networks. Follow the manufacturer recommendations for PHY and magnetics implementation, validate deterministic traffic behavior, and confirm the operating-temperature and compliance requirements applicable to the finished installation.

🎥

Surveillance Network Concentrator

The BCM53107MIMMLG is applicable to a surveillance concentrator that aggregates several Fast Ethernet cameras or access nodes before forwarding traffic over a higher-level uplink. Its seven-port FE switching capability reduces the number of separate switching blocks required in a compact installation. EEE may benefit systems whose camera links are frequently idle, although traffic behavior must be tested to avoid unwanted link-state effects. The design should include the required Ethernet magnetics, isolation, power distribution, and controlled-impedance routing, then verify camera stream continuity during link transitions and upstream failures.

🌐

Compact Network Appliance

The BCM53107MIMMLG can support a compact network appliance that needs several local Ethernet connections for service modules, management interfaces, and an uplink. Its seven-port FE switch with EEE provides a centralized networking block without relying on seven discrete interface sections. The controller should be placed according to the manufacturer layout guidance so clock, power, and high-speed signal paths remain predictable. Because the exact supply voltage and pinout are not established by the available product record, engineers must complete the manufacturer-datasheet review before component placement and PCB release.

📱

Embedded Communications Platform

The BCM53107MIMMLG is suitable for an embedded communications platform that connects local processors, service modules, and external network equipment through Fast Ethernet links. The seven-port configuration can simplify board partitioning while EEE offers a path to lower power consumption during idle periods. Implementation requires matching the device's management and host-facing architecture to the platform firmware, and designers should not assume that a different Broadcom PHY provides a direct substitute without checking the reference design. Verify signal integrity, thermal margin, and recovery behavior across power transitions.

🔧

Access Equipment Aggregator

The BCM53107MIMMLG can aggregate Fast Ethernet connections in access equipment where several subscriber, service, or management ports converge on a common fabric. Its seven-port configuration provides useful integration density, and EEE can improve energy efficiency on lightly used access links. The circuit must be designed around the manufacturer's supported PHY and magnetics topology, with attention to isolation requirements and controlled-impedance routing. Before production, verify port mapping, pause-frame behavior, link-up timing, and thermal performance under the maximum expected channel loading and ambient conditions.

Tóm tắt các sản phẩm được đề xuất

BCM53107MIMMLG Broadcom Được sử dụng trong: Industrial Ethernet Gateway, Building Automation Controller, Surveillance Network Concentrator, Compact Network Appliance, Embedded Communications Platform, Access Equipment Aggregator BCM53101MIMLG Related Broadcom Fast Ethernet interface device Được sử dụng trong: Industrial Ethernet Gateway, Building Automation Controller, Surveillance Network Concentrator, Compact Network Appliance, Embedded Communications Platform, Access Equipment Aggregator
What is BCM53107MIMMLG?
The BCM53107MIMMLG is a Broadcom seven-port Fast Ethernet switch controller with Energy Efficient Ethernet. Its confirmed categorization as an interface controller places it within integrated Ethernet switching and network-interface semiconductors. The device is intended for systems that consolidate multiple Fast Ethernet links into a compact network subsystem while supporting energy-aware link operation. Use the manufacturer datasheet for the authoritative pin assignment, electrical characteristics, timing data, and recommended external circuitry.
How many Ethernet ports does BCM53107MIMMLG have?
The BCM53107MIMMLG has seven Fast Ethernet ports, as stated in the Broadcom product description. This port count makes it applicable to embedded gateways, industrial controllers, access equipment, and compact network appliances that need several 10/100-class copper Ethernet connections. The controller should be integrated with the required PHY, magnetics, clocking, and power implementation described in the manufacturer's hardware documentation.
What features does BCM53107MIMMLG support?
The confirmed feature set of the BCM53107MIMMLG includes seven Fast Ethernet ports and Energy Efficient Ethernet support. EEE permits a compatible link to reduce power consumption during periods of low traffic by using a low-power operating state. Other functions, including management behavior, host interfaces, package details, and electrical limits, should be established from the manufacturer datasheet rather than inferred from the distributor product summary.
Where can I download the BCM53107MIMMLG datasheet PDF?
The BCM53107MIMMLG datasheet is available through the datasheet link associated with the Broadcom component record in the product sources on this page. Download the PDF and use its pin-description table, absolute-maximum ratings, recommended operating conditions, timing diagrams, and reference schematic before assigning PCB nets. The MIMMLG ordering designation alone should not be used to infer package dimensions or pin numbering.
Where can I find the BCM53107MIMMLG pinout?
The BCM53107MIMMLG pinout should be taken from the pin-description table in the Broadcom manufacturer datasheet. The available component record confirms the function and ordering designation but does not expose a complete numbered pin map, so assigning individual signal names without that table could produce wiring errors. Download the datasheet and cross-check the exposed-pad or thermal requirements, supply pins, clocks, port interfaces, and control signals before PCB release.
What can replace BCM53107MIMMLG?
The closest supported replacements are Broadcom BCM53102MIMMLG through BCM53106MIMMLG family members because they share the MIMMLG package designation and overlapping Fast Ethernet switch functions. Their exact interchangeability depends on port count, management interface, clocking, pin assignment, and power requirements. Treat these as same-family drop-in candidates for engineering review rather than automatic substitutions, and verify every connection against both manufacturer datasheets.
Is BCM53107MIMMLG the same as BCM53101MIMLG?
No direct equivalence should be assumed between BCM53107MIMMLG and BCM53101MIMLG. The latter is identified as a Broadcom 10/100 Base-T/TX PHY interface, while BCM53107MIMMLG is identified as a seven-port FE switch with EEE. Their device functions and ordering designations differ, so the BCM53101MIMLG record is more appropriate as a related Ethernet-interface component than as a confirmed drop-in replacement.
When should I choose BCM53107MIMMLG over another Broadcom FE switch?
Choose BCM53107MIMMLG when the design specifically requires seven Fast Ethernet switch ports and Energy Efficient Ethernet in the MIMMLG device family. A smaller BCM53102MIMMLG through BCM53106MIMMLG candidate may be preferable when fewer ports are sufficient and a lower-utilization implementation improves cost or board area. Final selection requires checking the datasheet pin map, switch-management requirements, clocking, and external PHY architecture.
Is BCM53107MIMMLG suitable for industrial Ethernet equipment?
The BCM53107MIMMLG is functionally suitable for multi-port Fast Ethernet networking in industrial equipment, subject to device-level qualification and operating-condition checks. Its seven-port switch and EEE support suit gateways, controllers, and network concentrators, but the available record does not confirm the temperature range or automotive qualification status. Review environmental ratings and industrial design requirements in the manufacturer documentation before release.
What is the best Broadcom equivalent for BCM53107MIMMLG?
The best-supported Broadcom equivalent is BCM53106MIMMLG because it is the nearest lower member of the same MIMMLG switch family identified for drop-in engineering review. Compatibility must still be confirmed for port count, management signaling, timing, and pin assignment. Cross-manufacturer alternatives were not established with pin-compatible evidence, so a Broadcom-family candidate remains the safer starting point for a replacement review.
What are the key specifications of BCM53107MIMMLG that engineers should know?
The key confirmed specifications of BCM53107MIMMLG are its seven Fast Ethernet ports, Energy Efficient Ethernet support, interface-controller classification, Broadcom origin, and MIMMLG ordering designation. The device sits within the Ethernet switch controller hierarchy and can serve as the central multiport switching element in embedded Ethernet equipment. Supply voltage, timing limits, temperature range, package dimensions, and exact pin count require confirmation from the manufacturer datasheet.
Does BCM53107MIMMLG require external Ethernet magnetics?
The external magnetics and PHY arrangement must be implemented according to the Broadcom reference design because BCM53107MIMMLG is identified as an interface and switch controller rather than a complete standalone network endpoint. The available product record does not state whether every physical layer is integrated. Confirm the required external components and isolation boundaries in the manufacturer schematic before finalizing the bill of materials and four-layer or two-layer PCB stack-up.
Where to buy BCM53107MIMMLG online?
Use the Request a Quote form on this page to request the current BCM53107MIMMLG price, stock position, packaging details, and lead time. The component is listed by multiple sourcing channels, but availability and commercial terms can change independently of technical documentation. Provide the required quantity, date code preference, and destination when requesting the quote so procurement can confirm the exact MIMMLG ordering code.
What is the price of BCM53107MIMMLG?
The current commercial price for BCM53107MIMMLG is obtained through the Request a Quote form on this page. Pricing depends on order quantity, inventory, date code, packaging, and destination, so a static figure would not represent a reliable quotation. The request should identify the exact MIMMLG MPN and any required production traceability rather than a broader BCM53107 family designation.
What is the lead time and stock status of BCM53107MIMMLG?
The current stock status and lead time for BCM53107MIMMLG should be confirmed through the Request a Quote form on this page. Sourcing channels may report different quantities or shipment timing, and the product record does not establish a guaranteed inventory level. Include the required quantity, target date, approved manufacturer list, and packaging preference so procurement can return an actionable supply commitment.
Is BCM53107MIMMLG in stock?
BCM53107MIMMLG availability is quote-dependent and should be confirmed through the Request a Quote form on this page. Although the part is actively listed in distributor catalogs, a listing alone does not guarantee current stock or a fixed delivery schedule. Request a quote with your required quantity, date code preference, and destination to obtain the most current allocation information.

Dữ liệu tham khảo kỹ thuật cho BCM53107MIMMLG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose BCM53107MIMMLG when the design requires a Broadcom seven-port Fast Ethernet switch with EEE and the application can be implemented around the manufacturer's supported PHY and magnetics architecture. Review BCM53106MIMMLG through BCM53102MIMMLG when fewer ports would be sufficient; they may preserve the MIMMLG family footprint and reduce unnecessary switching capacity, but their pin assignments and management requirements must be checked. Do not select BCM53101MIMLG as an automatic replacement because it is identified as a 10/100 Base-T/TX PHY interface rather than the seven-port switch. Final approval depends on the manufacturer datasheet, including supply voltage, timing, thermal conditions, package dimensions, and the complete numbered pinout. The commercial proposal should also confirm the exact ordering code, packaging, date code, and delivery requirements before a production order is released.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này BCM53106MIMMLG BCM53105MIMMLG BCM53104MIMMLG BCM53103MIMMLG BCM53102MIMMLG
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Package MIMMLG MIMMLG MIMMLG MIMMLG MIMMLG MIMMLG

Bảo phân biệt quan trọng

  • Higher confirmed port density than the lower MIMMLG switch-family candidates (vsBCM53102MIMMLG)
  • Confirmed EEE support in the primary device description (vsBCM53103MIMMLG)
  • Broader local-port consolidation for embedded Ethernet equipment (vsBCM53101MIMLG)

Ghi chú thiết kế

Follow the Broadcom reference layout for clock, Ethernet, supply, and ground connections. Place decoupling and clock-conditioning components close to their associated pins, keep switching interfaces away from noisy sources, and preserve the reference stack-up and controlled-impedance geometry. Do not infer MIMMLG land geometry from the ordering code alone; use the package drawing in the manufacturer datasheet and verify it against the PCB library before release.

Use the manufacturer-recommended supply topology, capacitor types, and power sequencing for BCM53107MIMMLG. The available record does not specify operating voltage or current, so those values must come from the datasheet before the power tree is designed. Check startup current, port-related transients, and the maximum expected traffic condition. Confirm that local decoupling and the external Ethernet components remain within their own voltage and temperature limits under the worst system load.

Validate the complete Ethernet signal path with the intended PHY and magnetics arrangement rather than treating the switching controller as a complete physical-layer endpoint. Review characteristic impedance, insertion loss, return loss, pair skew, isolation boundaries, and connector or magnetics placement. Manufacturing test points should not interrupt return paths. Signal-integrity simulation or measurement is particularly important when long board traces, cable connectors, or non-ideal magnetics are used.

Do not substitute a BCM53101MIMLG record for BCM53107MIMMLG merely because both are Broadcom Ethernet-interface devices. The confirmed functions differ: BCM53107MIMMLG is a seven-port FE switch with EEE, whereas BCM53101MIMLG is identified as a 10/100 Base-T/TX PHY interface. Likewise, review port count, management signaling, clocking, pin assignment, and PHY requirements before approving any BCM53102MIMMLG through BCM53106MIMMLG family substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance status could not be established from the Broadcom component description or the listed sourcing records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the manufacturer product page or declaration documents for the exact ordering code.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

BCM53107MIMMLG BCM53107MIMMLG datasheet BCM53107MIMMLG datasheet pdf BCM53107MIMMLG pinout BCM53107MIMMLG equivalent BCM53107MIMMLG replacement BCM53107MIMMLG cross reference Broadcom BCM53107MIMMLG BCM53107MIMMLG 7 port FE switch BCM53107MIMMLG EEE controller BCM53107MIMMLG industrial Ethernet BCM53107MIMMLG price BCM53107MIMMLG stock BCM53107MIMMLG vs BCM53101MIMLG

Các bộ phận và thuật ngữ liên quan

Broadcom BCM53107MIMMLG BCM53101MIMLG BCM53102MIMMLG BCM53103MIMMLG BCM53104MIMMLG BCM53105MIMMLG BCM53106MIMMLG MIMMLG Fast Ethernet switch Ethernet switch controller interface controller network interface semiconductor seven-port FE switch Energy Efficient Ethernet EEE 10/100 Base-T/TX PHY industrial Ethernet building automation surveillance network network access equipment embedded communications Ethernet magnetics integrated circuit semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ