BCM5697B0IPBG - 12-Port Gigabit Ethernet Switch | Broadcom
MPN: BCM5697B0IPBG ✓ Hoạt độngBCM5697B0IPBG Tóm tắt
An Ethernet switch is a network-interface semiconductor that receives Ethernet frames on one port and forwards them to the appropriate destination port according to address tables and switching policy. The BCM5697 family belongs to the broader hierarchy of Ethernet interface ICs, network interface controllers, LAN switching semiconductors, and connectivity semiconductors. Such devices reduce the component count and interconnect complexity of multi-port Ethernet equipment compared with implementing each port as a separate discrete interface.
The principal feature of BCM5697B0IPBG is its 12-port Gigabit Ethernet switching capability. Layer 2 switching allows a device to forward traffic within a local network using hardware-assisted frame handling rather than requiring the host processor to implement basic switching functions port by port. The family description identifies it as a scalable Layer 2 Gigabit Ethernet switch, making it relevant to designs requiring multiple 1 Gb/s Ethernet connections in access infrastructure, enterprise edge equipment, and other LAN systems.
The BCM5697B0IPBG designation belongs to Broadcom's BCM5697 product family, whose device classification is an interface driver, receiver, and transceiver-class integrated circuit. Its B0 revision and IPBG ordering suffix identify the specific device configuration and package arrangement. Detailed electrical ratings, clocking requirements, register organization, media-access-control interfaces, power consumption, and environmental limits must be confirmed in the Broadcom BCM5697 datasheet before schematic or firmware release.
Typical application areas include 12-port managed Ethernet switches, industrial Ethernet equipment, network-interface expansion, telecom access hardware, and embedded systems that need several Gigabit Ethernet links. The central advantage is integration: a multi-port switching IC can simplify PCB routing and host-controller interaction compared with several separate single-port Ethernet components. Thermal and signal-integrity performance still depend on the complete board layout, magnetics interface, thermal design, and exact Broadcom reference design.
For a new PCB, use the Broadcom BCM5697 datasheet pin description table to assign every PBG signal, connect the required clocks and power rails, and preserve the specified high-speed Ethernet trace geometry. Decoupling should follow the datasheet and reference-design guidance, while magnetics and PHY-related separation should be reviewed against the target EMC environment. A firmware-compatible replacement must match the register map, strap settings, initialization sequence, and interface timing rather than only the package outline.
This product page combines the verified BCM5697B0IPBG identity, package and application classification, sourcing context, cross-reference review, and engineering-oriented design guidance. It also distinguishes confirmed device attributes from parameters that still require verification from the manufacturer datasheet, helping engineers evaluate the IC without overlooking board-level implementation constraints.
Bộ thay thế dễ dàng lắp đặt cho BCM5697B0IPBG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBCM5697B0IPBG Tỷ lệ tối đa & tính chất điện
| Manufacturer | Broadcom Limited |
| Device Type | 12-port scalable Layer 2 Gigabit Ethernet switch |
| Number of Ethernet Ports | 12 ports |
| Ethernet Data Rate | 1 Gb/s per port |
| Network Layer | Layer 2 |
| Device Classification | Interface driver, receiver, and transceiver IC |
| Product Family | BCM5697 |
| Revision Code | B0 |
| Package Suffix | IPBG |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân BCM5697B0IPBG ipbg
Cấu hình chân cho BCM5697B0IPBG (ipbg gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM5697B0IPBG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM5697B0IPBG phù hợp cho 6 Áp dụngs: 12-Port Managed Ethernet Switch, Industrial Ethernet Gateway, Telecom Access Equipment, Embedded Network-Interface Expansion, Enterprise Network Edge Device, Network Test and Measurement.
12-Port Managed Ethernet Switch
BCM5697B0IPBG fits a 12-port managed switch because the Broadcom BCM5697 family is identified as a scalable Layer 2 Gigabit Ethernet switch with 12 ports. Place the IC at the center of the switching fabric and connect each supported Ethernet channel to the appropriate external network interface or PHY arrangement specified by the manufacturer. Its 1 Gb/s-per-port scale supports conventional Gigabit LAN endpoints while reducing the number of separate switching blocks required on the PCB. Before schematic release, confirm the supported media interface, port mapping, management firmware, clock sources, and thermal limits in the Broadcom BCM5697 documentation.
Được đề xuất
Industrial Ethernet Gateway
The BCM5697B0IPBG can support an industrial Ethernet gateway requiring 12 local 1 Gb/s network connections and centralized Layer 2 frame forwarding. Its multi-port switching function can consolidate traffic from sensors, controllers, service equipment, or edge computers behind one switching subsystem instead of requiring twelve separate interface arrangements. Industrial suitability still depends on the verified temperature grade, EMC resilience, lifecycle commitment, and isolation strategy. Use the Broadcom BCM5697 hardware reference design to establish power distribution, clocking, Ethernet routing, magnetics spacing, and recovery behavior before production testing.
Được đề xuất
Telecom Access Equipment
BCM5697B0IPBG is applicable to access and aggregation equipment where multiple Gigabit Ethernet links terminate near a network processor or line-card controller. Its 12-port Layer 2 switching organization can provide deterministic local connectivity while the host processor handles higher-layer routing, authentication, management, and service policy. The implementation must preserve the timing and signal-integrity requirements of each supported Ethernet interface and use the manufacturer-defined initialization sequence. Confirm thermal performance, clock topology, port capabilities, and firmware integration because the verified product listing does not define the complete hardware operating envelope.
Được đề xuất
Embedded Network-Interface Expansion
The BCM5697B0IPBG can expand an embedded system from isolated network links into a 12-port Layer 2 switched segment. This arrangement is useful for industrial controllers, test systems, building infrastructure, and embedded appliances that must distribute Gigabit Ethernet connectivity to several internal modules. The switching IC handles local frame forwarding while an attached processor supplies configuration and management functions. Before using the device, verify whether each port connects directly to copper PHY devices, shared network processors, or another Broadcom switching block, because the exact physical and host interfaces must follow the BCM5697 datasheet.
Được đề xuất
Enterprise Network Edge Device
BCM5697B0IPBG is suitable for the switching stage of a compact enterprise edge device requiring 12 Gigabit Ethernet service ports. Layer 2 forwarding can isolate connected devices while a management processor handles VLAN policy, monitoring, and higher-layer services. The integration reduces the number of discrete Ethernet interface circuits, but the final design still needs controlled-impedance routing, validated magnetics or PHY interfaces, adequate power delivery, and system-level EMC testing. Use Broadcom's reference layout and exact electrical limits to avoid board respins, especially around clocks, high-speed interfaces, and copper connections.
Được đề xuất
Network Test and Measurement
The 12-port Layer 2 configuration of BCM5697B0IPBG can be used in test and measurement equipment that requires numerous Gigabit Ethernet connections for instrument control, synchronization, or traffic generation. Local switching can organize connected devices while keeping traffic paths within the Layer 2 domain. For instrumentation, pay particular attention to clock jitter, deterministic startup, port isolation, thermal behavior, and long-term device availability. The exact supported interfaces and test patterns must be confirmed against the Broadcom BCM5697 datasheet, while the PCB should follow the manufacturer reference layout for its PBG package.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BCM5697B0IPBG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Broadcom |
| Package | IPBG package designation |
| Port Count | 12 ports |
| Ethernet Rate | 1 Gb/s per port |
| Switching Layer | Layer 2 |
| Device Class | Interface driver, receiver, and transceiver IC |
| Product Family | BCM5697 |
| Revision Code | B0 |
| Introduction Date | January 1, 2000 |
Ghi chú thiết kế
Implement the Broadcom reference PCB layout for the IPBG package, with particular attention to complete power-plane connections, exposed-pad treatment, decoupling placement, and high-speed return paths. Place input and bulk capacitors at the locations defined by the reference design rather than distributing them according to general regulator-layout habits. Validate every Ethernet net's length, impedance, layer transitions, and isolation from clocks before fabrication.
Treat clocks and Ethernet links as coupled high-speed interfaces: use the exact reference stackup and controlled-impedance geometry, avoid unnecessary test pads, and provide continuous reference planes beneath routed signals. Keep clock traces away from switching-node and magnetics areas, and follow the manufacturer's recommended spacing around sensitive interfaces. If an external PHY, magnetics, or line driver is used, verify its electrical characteristics against the BCM5697 port requirements in the datasheet.
Estimated: thermal dissipation equals total input power minus delivered output power, where input power is the sum of each supply voltage multiplied by its current. Apply the resulting worst-case value to the PCB thermal path and raise the estimate by design margin. The actual junction temperature must remain below the datasheet limit at the highest specified ambient temperature; use Broadcom's thermal data and reference copper layout rather than assuming that the PBG package dissipates negligible heat.
Do not treat a similar 12-port Ethernet switch as a drop-in replacement merely because its land pattern appears identical. A functional migration must confirm pin-by-pin power and ground assignments, clock inputs, reset and strap behavior, port mapping, register compatibility, firmware API, PHY or SerDes support, and initialization timing. Also distinguish BCM5697B0IPBG from its listed BCM5697B0IPBG-ND ordering notation before placing the order.
Thông tin tuân thủ
The available Broadcom and distributor listings do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this is a networking interface IC rather than an identified automotive-qualified device; confirm any project-specific requirement with Broadcom.