BCM8747BKFBG - Quad 10GBE SFI-to-XAUI PHY | Broadcom
MPN: BCM8747BKFBG ✓ Hoạt độngBCM8747BKFBG Tóm tắt
A 10GBE interface transceiver is a physical-layer device that carries high-speed serial data between a line card, optical module, or network processor and the logic that controls the link. In the signal path, SFP+ supplies the serial input and XAUI supplies the parallel widebus output. This interface hierarchy belongs to Ethernet transceivers, network interface controllers, semiconductor interface ICs, and ultimately the broader telecommunications and data-center networking equipment market.
The principal feature of BCM8747BKFBG is its four-channel architecture. A quad implementation can reduce the number of physical-layer devices needed in a networking chassis while retaining separate 10 Gbps serial channels. It is particularly relevant to 10 Gigabit Ethernet line cards, optical backplanes, router interfaces, server network adapters, and telecommunications aggregation equipment where board area and channel density influence front-panel density and thermal design.
The BCM8747BKFBG converts SFI signals to XAUI signals for use with compatible Ethernet silicon and optical modules. Its 10 Gbps data rate matches the commonly used 10GBASE-R SFI physical layer, while XAUI provides a four-lane differential widebus interface between physical-layer devices and higher-level network components. Signal integrity, reference-clock distribution, power sequencing, and thermal performance remain the principal system-level implementation considerations.
Typical deployments include carrier Ethernet equipment, enterprise aggregation switches, data-center top-of-rack systems, router line cards, and optical transceiver designs. Quad-channel consolidation is valuable when a system needs several 10GBE ports and must fit the PHY functions into a limited PCB area. The device is also used where designers want a standardized SFI-to-XAUI conversion stage between an SFP+ optical interface and XAUI-capable processing silicon.
PCB implementation requires careful power and return-path planning because high-speed differential signals are sensitive to impedance discontinuities and reference-plane noise. Place power and ground connections directly to their package balls, keep sensitive clock and data routing short, and use the manufacturer pin-description table to assign every ball. Use the manufacturer's recommended decoupling network and verify the design with eye, jitter, and compliance measurements.
This product page combines the confirmed BCM8747BKFBG channel and interface information with practical selection guidance, application analysis, and design considerations. It also identifies where electrical details, package-ball assignments, lifecycle status, and certified drop-in replacements require confirmation before a new design is released.
Bộ thay thế dễ dàng lắp đặt cho BCM8747BKFBG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBCM8747BKFBG Tỷ lệ tối đa & tính chất điện
| Product Type | Quad-channel 10GBE interface transceiver IC |
| Manufacturer | Broadcom Limited |
| Channel Count | 4 channels |
| Tốc độ dữ liệu | 10 Gbps per channel |
| Serial Input Interface | SFI |
| Widebus Output Interface | XAUI |
| Ethernet Generation | 10 Gigabit Ethernet |
| Application Classification | Telecom interface IC |
| Package Technology | BGA (Ball Grid Array) |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tray |
| Maximum Differential Data Rate | 10 Gbps per channel |
| Interface Direction | SFI-to-XAUI |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Hướng dẫn cấu hình chân BCM8747BKFBG bga (ball grid array)
Cấu hình chân cho BCM8747BKFBG (bga (ball grid array) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM8747BKFBG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM8747BKFBG phù hợp cho 6 Áp dụngs: 10 Gigabit Ethernet Line Cards, Optical Network Adapter Cards, Carrier Ethernet Aggregation, Data-Center Top-of-Rack Systems, Router and Switch Port Expansion, Telecommunications Optical Modules.
10 Gigabit Ethernet Line Cards
BCM8747BKFBG fits 10GBE line cards that convert four SFP+ optical links to XAUI for a compatible network processor. Using four 10 Gbps channels in one BGA device can reduce physical-layer component count and conserve PCB area compared with four separate single-channel devices. The implementation should preserve matched differential routing for every SFI and XAUI lane, maintain continuous reference planes, and decouple each supply domain close to its package balls. Clock quality, power sequencing, thermal gradients, and channel-to-channel skew must be evaluated in the final board because the confirmed product information identifies the interfaces and rate but does not provide those timing or power limits.
Được đề xuất
Optical Network Adapter Cards
BCM8747BKFBG is appropriate for optical adapter cards that combine several 10 Gbps SFP+ links with XAUI-capable processing silicon. The quad-channel arrangement can simplify chassis density when a board must expose multiple 10GBE ports without duplicating four separate PHY packages. Optical modules remain responsible for the electrical characteristics of their SFP+ side, while BCM8747BKFBG performs the SFI-to-XAUI conversion. Designers should reserve equal-length or tolerance-controlled routing for each differential pair, provide continuous ground references, and validate the assembled card with module, cable, clock, and chip-to-chip link-margin testing.
Được đề xuất
Carrier Ethernet Aggregation
BCM8747BKFBG can support carrier-grade aggregation equipment where several 10 Gbps optical interfaces feed a common switching or packet-processing ASIC. Consolidating four SFI-to-XAUI conversions into one BGA package reduces board-level PHY count and may improve routing flexibility in space-constrained line cards. Production designs should include complete I/O-budget, return-loss, insertion-loss, jitter, and skew analysis for the implemented channel. Thermal placement near an optically dense front panel also matters because adjacent high-speed ICs and power regulators can create a nonuniform temperature gradient that affects margin.
Được đề xuất
Data-Center Top-of-Rack Systems
BCM8747BKFBG is suitable for data-center top-of-rack systems requiring multiple 10GBE links between network processors and optical modules. Its four-channel SFI-to-XAUI organization is useful when the host ASIC exposes XAUI and the system uses SFP+ cages. The board should avoid split power planes under the BGA, minimize via stubs on high-speed nets, and provide independent local decoupling. Before deployment, verify module interoperability, supported optical reach, link training behavior, firmware support, and environmental requirements because these system-level characteristics extend beyond the transceiver's confirmed 10 Gbps-per-channel interface description.
Được đề xuất
Router and Switch Port Expansion
BCM8747BKFBG can serve as the physical-layer conversion element in router or switch port-expansion boards built around XAUI-capable switching silicon. Four 10 Gbps channels per package allow a board architecture to increase front-panel port density while limiting the number of dedicated PHY devices. The implementation must align the device's supply, reference clock, control, and per-lane routing with the exact host ASIC interface. Signal-integrity simulation should include package and PCB parasitics, connector or cage transitions, and worst-case channel skew. Firmware and system validation must also confirm the supported line rate and recovery behavior of the complete interface chain.
Được đề xuất
Telecommunications Optical Modules
BCM8747BKFBG is relevant to telecommunications optical-module boards that require an SFI electrical input and an XAUI electrical output. Placement within the module depends on whether the optical engine produces SFI directly or requires conversion before reaching an XAUI-capable component. The four-channel configuration is attractive when one module supports four 10 Gbps optical lanes. Designers should follow the detailed manufacturer application circuit for termination, clocking, decoupling, and exposed-pad connection where applicable. Signal and power integrity should be validated across temperature, while the completed module must satisfy its intended protocol, optical reach, diagnostic, and interoperability requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BCM8747BKFBG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Broadcom |
| Package | BGA (Ball Grid Array) |
| Channel Count | 4 channels |
| Data Rate | 10 Gbps per channel |
| Input Interface | SFI |
| Output Interface | XAUI |
| Ethernet Generation | 10 Gigabit Ethernet |
| Mounting Type | Surface mount |
| Shipping Format | Tray |
Bảo phân biệt quan trọng
- Four-channel 10GBE conversion in one package (vsAny single-channel SFI-to-XAUI transceiver)
- Purpose-defined SFI-to-XAUI interface (vsA general-purpose Ethernet transceiver)
- High-density BGA integration (vsA discrete or leaded-interface implementation)
Ghi chú thiết kế
Treat every SFI and XAUI differential pair as a controlled-impedance channel rather than ordinary point-to-point routing. Use the host ASIC and Broadcom device recommendations to select width, spacing, reference-plane transitions, connector or cage geometry, and via construction. Avoid plane splits, unnecessary stubs, and right-angle transitions beneath the device. Validate the completed assembly with eye diagrams, jitter decomposition, differential impedance checks, and worst-case channel-skill measurements across temperature.
Place the BGA on a multilayer board with an uninterrupted reference plane beneath the high-speed region and continuous ground-plane paths for every return current. Follow the Broadcom application circuit for supply pins, exposed-pad connection, reference-clock routing, and decoupling. Place bulk and local bypass components near the appropriate package balls, keep supply-loop area small, and reserve symmetrical escape routes so differential pairs experience similar vias and transition structures.
Evaluate the heat flow from the BGA into the multilayer PCB rather than relying only on the package outline. The confirmed product information does not specify power dissipation or junction limits, so obtain those values from the manufacturer datasheet and apply the package's thermal model to the actual board stackup and copper area. Keep high-current regulators and other heat-producing devices away from sensitive clock routes, and check junction temperature under the worst combination of four active channels, maximum ambient temperature, and minimal airflow.
Do not infer pin compatibility from the words SFI-to-XAUI or from the existence of another Broadcom PHY. A valid replacement must reproduce the BCM8747BKFBG ball map, supply requirements, reference-clock interface, control behavior, lane mapping, and 10 Gbps electrical performance. Also verify that the companion ASIC supports the exact four-channel XAUI configuration. Package identifiers alone are insufficient for a safe drop-in decision.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the product information for BCM8747BKFBG. Confirm the exact ordering code with Broadcom before using these fields for regulatory qualification.