BD3818KS - 6-Channel 5.1ch Audio Processor | ROHM
MPN: BD3818KS ✓ Hoạt độngBD3818KS Tóm tắt
An audio sound processor is a specialized semiconductor that controls and conditions multiple audio channels before they reach amplifiers or transducers. Within the broader product hierarchy, the BD3818KS belongs to the audio signal processor class, which is distinct from a power amplifier. Its role is to select sources, set channel levels, apply tone and dynamic-bass functions, and combine the resulting channels into a usable 5.1-channel signal path.
The principal functions documented for the BD3818KS include independent six-channel master volume, a five-channel input selector, a gain amplifier, bass control, treble control, mixing, and dynamic bass boost. The mode and input selectors allow an audio system to route selected sources more flexibly than a fixed analog mixer. The 1 dB volume-step resolution provides finer level adjustment than a continuously variable control implemented solely with external passive components.
The BD3818KS and BD3811K1 share the same 5.1-channel sound-processor concept and integrated mode and input selectors. The BD3818KS adds mixing and dynamic bass boost, while the BD3811K1 uses bass boost instead. This distinction is important when comparing the two parts because their control features are not interchangeable even though both devices are associated with the same family documentation.
Typical uses include home-theater preamplifier and selector boards, multichannel amplifier control systems, car-audio controllers, and powered speakers that require centralized channel-volume and tone adjustment. The device is intended for systems in which source selection, channel balance, and low-frequency enhancement are implemented digitally or through a remote-control bus rather than by discrete potentiometers.
A successful design should preserve the recommended analog signal path, connect decoupling capacitors close to the supply pins, and route all six channels consistently to the downstream amplifier inputs. Designers should also verify the exact control logic, reference-voltage requirements, supported input levels, and unused-pin treatment against the manufacturer datasheet before releasing production artwork.
This page consolidates the verified product identity, package information, distributor availability references, function summary, family comparison, and design considerations for the BD3818KS. It also identifies which electrical, pin-level, pricing, compliance, and lifecycle details still require confirmation from the original manufacturer documents.
Bộ thay thế dễ dàng lắp đặt cho BD3818KS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBD3818KS Tỷ lệ tối đa & tính chất điện
| Product Type | 5.1ch sound processor |
| Device Classification | Audio signal processor |
| Number of Channels | 6 channels |
| Input Selector | 5 channels |
| Master Volume Range | 0 to -95 dB |
| Volume Step | 1 dB per step |
| Mute Function | Supported |
| Integrated Functions | Mode selector, input selector, gain amp, bass, treble, mixing, dynamic bass boost |
| Supply Voltage Range | 10 V to 14.8 V |
| Package Type | 80-SQFP |
| Package Dimensions | 14 mm x 14 mm |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân BD3818KS 14 mm x 14 mm
Cấu hình chân cho BD3818KS (14 mm x 14 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BD3818KS.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BD3818KS phù hợp cho 6 Áp dụngs: Home-Theater Preamp Controller, Multichannel Power-Speaker Control, Car-Audio Head-Unit Interface, Multi-Zone Residential Audio, Powered-Speaker Subwoofer Control, Audio Selector and Mixing Board.
Home-Theater Preamp Controller
The BD3818KS fits a home-theater preamplifier control board that must coordinate a 5.1-channel signal path and support source selection. Its documented five-channel input selector provides centralized routing, while the six-channel volume control covers front-left, front-right, center, surround-left, surround-right, and subwoofer levels from 0 to -95 dB in 1 dB increments. Integrated bass, treble, mixing, and dynamic bass boost allow system-level tuning without replacing the main signal-processing chain with separate controls. Designers should place the processor before the power-amplifier stages, maintain the documented analog reference and supply requirements, and verify every signal and control connection against the 80-SQFP pin table.
Được đề xuất
Multichannel Power-Speaker Control
The BD3818KS can serve as the central controller in a powered-speaker or multichannel amplifier input stage. The 5.1-channel architecture allows a single IC to coordinate channel selection and attenuation before signals reach separate left, right, center, surround, and subwoofer amplifiers. Its 1 dB volume increments provide repeatable level matching between channels, while bass, treble, mixing, and dynamic bass boost add user-adjustable tonal controls. The processor should be placed so that its outputs drive high-impedance amplifier inputs rather than speaker loads directly. Decoupling must be placed close to the supply pins, and the layout should keep the audio channels separated from switching regulators and digital control wiring to minimize noise coupling.
Được đề xuất
Car-Audio Head-Unit Interface
The BD3818KS is applicable to a car-audio head unit or external 5.1-channel controller that requires centralized source routing, channel balance, tone adjustment, and dynamic low-frequency enhancement. Its verified 10 V to 14.8 V operating range is compatible with a regulated 12 V automotive architecture when input transients and ground noise are controlled. Integrated five-channel input selection reduces the need for a separate mechanical input-selector network, while independent six-channel attenuation supports balanced front, center, surround, and subwoofer levels. Automotive qualification was not present in the supplied records, so production designs require confirmation of ROHM qualification, temperature limits, load dump protection, and transient tolerance for the exact device and ordering code.
Được đề xuất
Multi-Zone Residential Audio
The BD3818KS can support a multi-zone residential audio controller when the design requires a common 5.1-channel source bus with centralized mode selection and individual channel attenuation. The five-channel input selector allows several source paths to be selected before mixing, while the six-channel volume section provides consistent level control across the main theater channels and subwoofer. Tone, mixing, and dynamic bass boost can be used for calibration or user presets rather than requiring separate rotary controls in every zone. Integration is most practical where the downstream amplifiers accept line-level signals. Engineers should validate the control-command protocol, reference-voltage arrangement, control update timing, and output loading directly from the manufacturer documentation before finalizing the system architecture.
Được đề xuất
Powered-Speaker Subwoofer Control
The BD3818KS can be used in a powered-speaker design where subwoofer level must be coordinated with the main 5.1-channel audio system. Independent six-channel volume control permits the subwoofer channel to be balanced against the front, center, and surround channels rather than controlled only by the source device. Dynamic bass boost and bass adjustment provide system-level low-frequency controls, while mute and 1 dB attenuation steps make setup repeatable. The sound processor should be placed upstream of the subwoofer amplifier and should not be treated as a speaker driver. Signal-integrity practices include short analog traces, adequate supply decoupling, separate return-current routing for switching stages, and confirmation of the required output level and impedance from the authoritative datasheet.
Được đề xuất
Audio Selector and Mixing Board
The BD3818KS suits a dedicated audio selector and mixing board that combines multiple source inputs with a configurable 5.1-channel output. Its documented mode selector and five-channel input selector handle routing, while the integrated mixing function allows selected audio channels to be combined before downstream amplification. The gain amplifier, bass, treble, and dynamic bass boost stages provide additional user controls without requiring a separate bank of analog tone circuits. The device is particularly useful in installations where source selection and user adjustments are handled through a remote-control bus rather than front-panel potentiometers. Before PCB release, engineers should confirm the logical control states, mute behavior, channel signal levels, resistor values, and bypass or initialization sequence specified by ROHM.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BD3818KS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Device Type | 5.1ch sound processor |
| Channel Count | 6 channels |
| Input Selector | 5-channel input selector |
| Master Volume Range | 0 to -95 dB |
| Volume Resolution | 1 dB per step |
| Supply Voltage Range | 10 V to 14.8 V |
| Integrated Processing | Gain amp, bass, treble, mixing, and dynamic bass boost |
| Package | 80-SQFP, 14 mm x 14 mm |
| Brand | ROHM Semiconductor |
Bảo phân biệt quan trọng
- Combines six-channel volume with integrated dynamic bass boost (vsBD3811K1)
- Provides a five-channel input selector in a 5.1-channel processor (vsBD3811K1)
- Uses discrete 1 dB master-volume attenuation (vsBD3811K1)
Ghi chú thiết kế
Place all supply-decoupling capacitors directly beside the corresponding 80-SQFP power pins, with the shortest possible return path to the ground plane. Keep the processor and its reference components away from switching-regulator inductors, high-current MOSFET stages, and fast digital interfaces. Because the six audio channels are sensitive to shared ground impedance, use a quiet analog ground region and connect it to the main ground at a controlled, low-impedance point.
Route the six processed audio channels as short, continuous traces and avoid passing them beneath power inductors, relay contacts, or digital clock lines. Maintain consistent spacing between adjacent channels where practical and provide a solid ground reference beneath the analog section. Verify the exposed-pad or thermal and electrical requirements for the exact 80-SQFP footprint from the ROHM package drawing; the 14 mm by 14 mm body size alone is not sufficient to reproduce the land pattern safely.
The BD3818KS performs channel selection, attenuation, tone adjustment, mixing, and dynamic-bass processing, so each supported channel must have the correct source impedance and termination. Do not add undocumented gain or filtering stages between the processor and downstream amplifiers unless the signal levels have been checked against the datasheet. Confirm mute behavior, channel ramp behavior, reference-voltage stability, and control-command timing with the manufacturer documentation before enabling audio during system start-up.
Do not substitute the BD3811K1 solely because it appears in the same family document. According to the ROHM datasheet, the BD3811K1 provides bass boost while the BD3818KS provides mixing and dynamic bass boost, so their feature sets differ. A functional substitution must also match the 80-SQFP pinout, supply range, control interface, channel routing, volume behavior, and external component values; generic six-channel volume controllers are not automatically drop-in replacements.
Thông tin tuân thủ
The supplied verified excerpts do not contain explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification statements for BD3818KS. AEC-Q100 is recorded as not_applicable because no qualified automotive variant was identified in the provided data, not because the device was proven unsuitable for automotive use.
