CS4365-CQZ - 6-Channel 24-Bit Audio DAC | Cirrus Logic
MPN: CS4365-CQZ ✗ Cuối đờiCS4365-CQZ Tóm tắt
A digital-to-analog converter is an interface IC that transforms digital audio samples into corresponding analog voltage signals. The CS4365 belongs to the DAC hierarchy within audio converter ICs, interface semiconductors, and broader signal-processing electronics. Its six-channel architecture allows one device to drive front-left, front-right, center, surround-left, surround-right, and subwoofer channels in a home-theater or multichannel audio system.
The converter supports automatic sample-rate detection up to 192 kHz, digital de-emphasis, half-decibel-step volume control, ATAPI channel mixing, and selectable fast and slow digital interpolation filters. According to the manufacturer product page, its oversampled multibit delta-sigma modulator incorporates mismatch shaping to reduce distortion caused by component-capacitor mismatch. These features make the device suitable for CD, DVD, Blu-ray, gaming, professional audio, and other systems requiring multiple synchronized analog outputs.
The CS4365-CQZ accepts DSD and PCM digital audio and is specified for a 2.37 V to 5.25 V analog and digital supply range. Its 24-bit conversion resolution supports detailed digital-audio reproduction, while the 114 dB dynamic-range figure indicates a high signal-to-noise ratio for demanding listening environments. The device uses a surface-mount 48-LQFP package and is specified across a -40°C to +85°C operating-temperature range.
Typical applications include 5.1-channel and 7.1-channel surround-sound receivers, home-theater amplifiers, active speakers, digital mixing consoles, automotive audio systems, game consoles, and multichannel headphone amplifiers. In each case, the six outputs can be assigned to separate amplifier channels, while digital mixing and volume functions simplify system-level signal routing.
PCB implementation should preserve short, symmetric analog output paths and route digital clock and data signals away from the analog outputs. Follow the pin-description table, recommended decoupling network, exposed-pad requirements, and analog-layout guidance in the manufacturer datasheet when assigning tracks and grounding. Check the latest product status before starting a new design because the manufacturer identifies the CS4365 family as discontinued.
This page combines the manufacturer family description with package, interface, channel-count, resolution, supply, temperature, and lifecycle details, then adds application guidance, design considerations, and a disciplined comparison of the documented alternatives. Use the Request a Quote form for current commercial availability and lead-time confirmation.
Bộ thay thế dễ dàng lắp đặt cho CS4365-CQZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếCS4365-CQZ Tỷ lệ tối đa & tính chất điện
| Product Type | 6-channel audio digital-to-analog converter |
| Number of Channels | 6 channels |
| Conversion Resolution | 24 bits |
| Maximum Listed Sample Rate | 216 kHz |
| Manufacturer Family Sample Rate | Up to 192 kHz |
| Dynamic Range | 114 dB |
| Digital Audio Interfaces | DSD and PCM |
| Converter Architecture | Advanced oversampled multibit delta-sigma architecture |
| Analog and Digital Supply Range | 2.37 V to 5.25 V |
| Digital De-emphasis | Supported |
| Volume Control | Half-decibel step size |
| Channel Mixing | ATAPI channel mixing |
| Interpolation Filters | Selectable fast and slow digital interpolation filters |
| Mismatch Compensation | Mismatch shaping |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 48-LQFP, 7 x 7 mm |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | ROHS3 compliant |
| Trạng thái vòng đời | Discontinued |
Hướng dẫn cấu hình chân CS4365-CQZ 48-lqfp, 7 x 7 mm
Cấu hình chân cho CS4365-CQZ (48-lqfp, 7 x 7 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho CS4365-CQZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS4365-CQZ phù hợp cho 6 Áp dụngs: 5.1-Channel Home-Theater Receiver, Surround-Sound Amplifier, Professional Active Speaker, Digital Audio Rack and Mixer, Automotive Audio Head Unit, Game and Media Entertainment System.
5.1-Channel Home-Theater Receiver
The CS4365-CQZ fits a 5.1-channel receiver because its six DAC outputs can drive the front-left, front-right, center, surround-left, surround-right, and subwoofer channels from one package. It accepts DSD and PCM digital audio and provides 24-bit conversion with a 114 dB dynamic-range rating. ATAPI channel mixing and half-decibel-step volume control can simplify signal routing and level adjustment before the six analog outputs feed external power amplifiers. In the receiver, keep clock and data routing away from the analog output section, follow the manufacturer reference layout, and verify that the system sample-rate and interpolation-filter settings match the source material.
Được đề xuất
Surround-Sound Amplifier
The CS4365-CQZ is suitable for a multichannel surround amplifier that requires synchronized PCM and DSD decoding before separate output stages. Six analog outputs reduce the number of discrete DAC channels needed for a 5.1 or 7.1 architecture, while digital de-emphasis support covers legacy audio sources. Its 114 dB dynamic-range rating and 24-bit conversion provide a suitable signal path for high-fidelity amplification. Place the converter close to the channel-routing network, maintain short balanced or single-ended analog paths as appropriate, and use the manufacturer’s recommended decoupling and grounding arrangement to minimize clock-related interference.
Được đề xuất
Professional Active Speaker
The CS4365-CQZ can serve as the digital-to-analog stage in a professional active speaker when the source provides PCM or DSD and the system needs several independently routed outputs. Its six channels support stereo monitoring, surround playback, or auxiliary channels, while selectable fast and slow interpolation filters allow implementation decisions based on the application’s bandwidth and filtering goals. The device operates from a 2.37 V to 5.25 V supply range, making rail planning important when sharing the converter with nearby power electronics. Follow the datasheet’s analog grounding, output-routing, and decoupling guidance, and test every supported digital mode across the intended sample-rate range.
Được đề xuất
Digital Audio Rack and Mixer
The CS4365-CQZ is well matched to a digital mixer or rack processor that must distribute six PCM or DSD channels to external monitoring and processing equipment. ATAPI channel mixing can support flexible channel assignment, and half-decibel-step volume control provides fine attenuation before downstream amplification. The multibit delta-sigma architecture and mismatch shaping are intended to preserve low distortion in demanding playback paths. For installation, isolate the converter’s digital section from microphone and line-level analog circuitry, use a low-noise reference supply, and confirm the master-clock and serial-interface timing using the manufacturer’s application diagrams.
Được đề xuất
Automotive Audio Head Unit
The CS4365-CQZ can support a multichannel automotive audio head unit when its -40°C to +85°C operating range and existing board design meet the vehicle requirements. Six outputs suit front, rear, and center or auxiliary channels, while DSD and PCM support broadens compatibility with digital sources. Digital de-emphasis and selectable interpolation filters support legacy and modern playback formats. Automotive qualification must be confirmed separately because no AEC-Q100 status is listed for this ordering code, and the manufacturer identifies the family as discontinued. A new vehicle platform should therefore verify lifecycle, qualification, traceability, and long-term supply requirements before committing the device.
Được đề xuất
Game and Media Entertainment System
The CS4365-CQZ can provide multichannel analog audio for a game console, television, or dedicated media player that accepts digital PCM or DSD. Its six outputs allow a single converter to feed amplified speakers, headphones through external circuitry, or a surround-sound amplifier. Automatic sample-rate detection and selectable fast or slow interpolation filters support different source standards, while the 24-bit conversion and 114 dB dynamic-range rating target high-fidelity playback. Implement the digital interface according to the manufacturer timing requirements, maintain continuous return paths under the analog outputs, and verify filter and de-emphasis behavior with every system operating mode.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS4365-CQZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Cirrus Logic |
| Package | 48-LQFP (7 x 7 mm) |
| Product Type | Audio digital-to-analog converter |
| Number of Channels | 6 channels |
| Conversion Resolution | 24 bits |
| Maximum Listed Sample Rate | 216 kHz |
| Dynamic Range | 114 dB |
| Digital Audio Interfaces | DSD and PCM |
| Supply Voltage Range | 2.37 V to 5.25 V |
| Operating Temperature | -40°C to +85°C |
| RoHS Status | ROHS3 compliant |
| Lifecycle Status | Discontinued |
Bảo phân biệt quan trọng
- Six integrated DAC channels in one 48-LQFP converter (vsSingle-channel or two-channel discrete DAC solutions)
- Supports both DSD and PCM source formats (vsPCM-only multichannel DAC implementations)
- Integrated system-level audio functions (vsBasic DAC converters without digital mixing)
Ghi chú thiết kế
Separate the digital input and clock routing from the six analog outputs, and use the manufacturer reference layout as the basis for component placement. Keep analog traces short, avoid routing them beneath digital clocks or high-current switching nodes, and provide a continuous return path beneath each output. The converter’s six-channel architecture creates multiple sensitive outputs, so consistent channel symmetry is more valuable than a compact placement that lengthens or crosses analog paths.
Follow the manufacturer’s recommended analog and digital supply networks, including the required bypass capacitors and their placement. The stated operating range is 2.37 V to 5.25 V, but acceptable noise and performance depend on supply voltage, grounding, and decoupling. Keep high-current amplifier and switching-regulator connections away from the DAC’s sensitive reference and output nodes, and verify the power rails during maximum-channel playback rather than only at idle.
Treat the master clock and digital audio interface as timing-critical nets. Match routing appropriately for the interface speed, keep clock and data paths away from analog outputs, and use solid grounding around the converter. The device offers fast and slow interpolation filters, so configuration changes should be coordinated with the source format and validated for lock, channel alignment, and acceptable out-of-band behavior. Avoid changing filter modes during playback unless the system explicitly supports seamless reconfiguration.
Do not assume that any six-channel DAC can replace this device without a PCB and firmware review. A valid migration must preserve the 48-LQFP footprint, six-channel routing, DSD and PCM operation, clock architecture, de-emphasis, channel mixing, volume-control behavior, and filter configuration. Because the manufacturer identifies the CS4365 family as discontinued, production planning must also address lifecycle status, traceability, lot consistency, and long-term component availability.
Thông tin tuân thủ
The technical listing identifies the device as ROHS3 compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are stated for CS4365-CQZ.