CS5341-DZZ - 24-Bit 192kHz Audio ADC | Cirrus Logic
MPN: CS5341-DZZ ✗ Cuối đờiCS5341-DZZ Tóm tắt
An audio ADC is a specialized data-converter IC that converts continuously varying analog sound signals into digital words suitable for processing by a digital signal processor, codec, transmitter, or storage system. The CS5341 belongs to the delta-sigma ADC family within the broader analog-to-digital converter and signal-conversion hierarchy. Its dual-channel architecture supports professional and consumer digital-audio equipment where two synchronized audio channels are required.
The primary performance specifications include 24-bit conversion resolution, operation at up to 192 kHz per channel, and 105 dB signal-to-noise performance. The converter supports analog and digital supply operation across 3.3 V to 5 V rails, making it suitable for systems using either common supply levels. Serial output simplifies connection to audio processors while reducing parallel bus width and associated routing requirements.
Internally, the CS5341 uses a multi-bit delta-sigma architecture to perform conversion and digital filtering. Its integrated anti-alias filtering removes unwanted frequency content before the sampled signal is delivered digitally. The manufacturer describes the device as a complete analog-to-digital converter for digital-audio systems, with simultaneous processing of left and right inputs and serial generation of 24-bit values at sampling rates as high as 200 kHz per channel in the combined CS5341 and CS5342 family.
Typical applications include professional audio equipment, consumer audio processors, digital mixers, multichannel audio recorders, AV receivers, and instrumentation requiring high-resolution stereo capture. Its 105 dB dynamic range and 192 kHz capability are especially useful in mastering-oriented signal chains, while the serial interface reduces the number of interconnects required on a multi-channel system PCB.
Careful clock and grounding design is essential because converter performance depends on low-noise supply rails, clean analog inputs, and a stable master clock. Place decoupling capacitors close to the supply pins, keep analog and digital return currents separated where practical, and use short, impedance-controlled routes for the serial data, clock, and mode signals.
This page organizes the CS5341-DZZ specifications, lifecycle position, compatible family options, and application guidance into a concise engineering reference. It also identifies the information that must be confirmed in the manufacturer datasheet before assigning pins, setting the clock tree, or releasing a production PCB.
Bộ thay thế dễ dàng lắp đặt cho CS5341-DZZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CS5341-DZZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5341-CZZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5342-DZZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5342-CZZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5341-DZZ Tỷ lệ tối đa & tính chất điện
| Converter Type | Stereo multi-bit delta-sigma audio ADC |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 192 kSPS per channel |
| Dynamic Range | 105 dB |
| Analog Channels | 2 channels |
| Output Interface | Serial audio interface |
| Supply Voltage Range | 3.3 V to 5 V |
| Minimum Supply Voltage | 3.1 V |
| Maximum Supply Voltage | 5.25 V |
| Anti-Alias Filter | Integrated |
| Hộp | 16-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Commercial Temperature Range | -10 °C to +70 °C |
| Automotive Temperature Range | -40 °C to +85 °C |
| Số chân | 16 pins |
| Trạng thái RoHS | Compliant |
| Manufacturer Evaluation Board | CDB5341 demonstration board |
| Datasheet Length | 22 pages |
Hướng dẫn cấu hình chân CS5341-DZZ 16-pin tssop
Cấu hình chân cho CS5341-DZZ (16-pin tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho CS5341-DZZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS5341-DZZ phù hợp cho 6 Áp dụngs: Professional Stereo Audio Capture, Digital Audio Mixer, Multichannel Audio Recorder, AV Receiver and Home Theater, Digital Musical Instrument Processing, Precision Test and Measurement.
Professional Stereo Audio Capture
The CS5341-DZZ fits professional stereo capture stages that require 24-bit conversion at up to 192 kSPS per channel and 105 dB dynamic range. Its integrated sampling and anti-alias functions create a direct path from balanced or unbalanced analog inputs to serial digital audio data for a DSP, recorder, or digital mixer. The 16-pin TSSOP package also keeps the converter footprint compact, although the low-noise supply, clock, and grounding layout remain critical. For a new design, verify availability of a current converter with equivalent timing before committing the PCB.
Được đề xuất
Digital Audio Mixer
In a digital mixer, the CS5341-DZZ can convert two analog input channels into synchronized 24-bit serial samples for subsequent level, routing, and effects processing. Its maximum rate of 192 kSPS per channel accommodates high-resolution mixer inputs, while 105 dB dynamic range helps preserve low-level program material. The serial interface reduces parallel bus routing and frees board area. Designers should use short clock and data paths and treat the master clock as a high-quality signal to prevent jitter from degrading conversion performance.
Được đề xuất
Multichannel Audio Recorder
The CS5341-DZZ is suitable for synchronized stereo recording blocks in multichannel recorders, monitoring systems, and broadcast equipment. Two analog channels can be represented by 24-bit digital words at up to 192 kSPS, providing sufficient resolution for high-fidelity capture and post-processing. Its integrated anti-alias filtering reduces the need for separate external filtering at the converter input. Because multiple converter blocks depend on a common clock, isolate noisy digital circuitry from the analog section and provide local decoupling at every supply pin.
Được đề xuất
AV Receiver and Home Theater
The CS5341-DZZ can serve as the high-resolution analog input stage of an AV receiver, audio preamplifier, or home-theater processor. Its 24-bit conversion and 192 kSPS capability align with modern lossless-audio workflows, while the 105 dB dynamic range supports program sources with wide amplitude range. The converter's serial output can feed a digital audio processor or DAC directly. Proper analog grounding and shielded routing are essential because long cable inputs can inject noise that would otherwise limit the usefulness of the converter's 105 dB specification.
Được đề xuất
Digital Musical Instrument Processing
The CS5341-DZZ can convert stereo instrument or line-level signals before digital effects, synthesis, sampling, or recording. Its 24-bit data path and 192 kSPS maximum rate are useful when preserving transient detail and wide-band content from high-quality sources. The integrated anti-alias filter helps reject unwanted energy before digital processing, while the serial interface minimizes component count around the converter. Input conditioning remains application-specific and may require low-noise buffers, attenuation, or balanced input circuitry before the CS5341 analog pins.
Được đề xuất
Precision Test and Measurement
The CS5341-DZZ can capture low-level analog waveforms in instrumentation that benefits from high-resolution stereo conversion. A 24-bit converter supports 192 kSPS sampling and 105 dB dynamic range, allowing two measurement channels to be digitized for analysis, storage, or feedback control. The serial output can feed an embedded processor, but the complete measurement path also depends on the input amplifier, reference source, anti-alias requirements, and clock jitter. Keep analog input traces short and provide stable supplies to avoid reducing practical measurement accuracy.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS5341-DZZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CS5341-DZZR | CS5341-CZZR | CS5342-DZZ | CS5342-CZZR |
|---|---|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 16-pin TSSOP | 16-pin TSSOP - same | 16-pin TSSOP - same | 16-pin TSSOP - same | 16-pin TSSOP - same |
| Converter Type | Stereo multi-bit delta-sigma ADC | Stereo delta-sigma audio ADC | Stereo delta-sigma audio ADC | Stereo delta-sigma audio ADC | Stereo delta-sigma audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kSPS per channel | 192 kSPS per channel | 192 kSPS per channel | 192 kSPS per channel | 192 kSPS per channel |
| Analog Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Anti-Alias Filtering | Integrated | Integrated | Integrated | Integrated | Integrated |
| Lifecycle Status | Discontinued | Discontinued family | Discontinued family | Discontinued family | Discontinued family |
Bảo phân biệt quan trọng
- High-resolution conversion with integrated filtering (vsCS5342-CZZR)
- Direct same-family ordering-option path (vsCS5341-DZZR)
- Compact two-channel conversion in a 16-pin package (vsCS5341-CZZR)
Ghi chú thiết kế
Route analog input, clock, and serial-output signals according to the Cirrus Logic reference layout. Keep the analog and digital ground returns connected at a controlled point, avoid running digital clock traces beneath the analog inputs, and use the shortest practical connection from the converter to its decoupling capacitors. A clean physical arrangement reduces the risk that switching noise, clock crosstalk, or ground-current coupling will erode the specified 105 dB dynamic range.
Provide local bypass capacitance at the analog and digital supply pins and observe the capacitor values and placement specified in the manufacturer application circuit. Keep switching-regulator and high-current digital return paths away from the converter's analog ground node. Because the CS5341-DZZ supports a 3.3 V to 5 V operating range, confirm the exact analog and digital rail combinations permitted for the selected temperature grade before applying either supply value.
Treat the master clock as a precision timing signal and route it away from analog inputs and high-slew-rate data lines. Validate setup and hold timing at the connected processor under the worst-case clock condition, and use a low-jitter source where the target sampling rate is high. The serial output should be routed to the receiving DSP or controller with controlled impedance; excessive loading or an unsuitable common-mode arrangement can degrade data integrity even when the ADC itself operates within specification.
Do not approve a CS5342 or alternate-suffix device solely because it uses a 16-pin TSSOP package. Compare pin names, supply assignments, reset requirements, clock ratios, serial-interface modes, digital-filter characteristics, and timing diagrams against the installed design. Also verify the ordering suffix for temperature range and packaging. These checks are particularly important for repairs and obsolescence substitutions because identical packages do not guarantee identical electrical behavior.
Thông tin tuân thủ
RoHS compliance is identified for the CS5341-DZZ. The manufacturer documentation describes commercial and automotive temperature grades, but the exact grade encoded by the DZZ suffix and the AEC-Q100 qualification status require confirmation before an automotive qualification claim is made.