CS5523-ASZ - 16-Bit 4-Channel Sigma-Delta ADC | Cirrus Logic
MPN: CS5523-ASZ ✓ Hoạt độngCS5523-ASZ Tóm tắt
A sigma-delta ADC is an analog-to-digital converter that uses a charge-balance conversion technique and digital filtering to provide high resolution and good rejection of out-of-band noise. Within the broader semiconductor hierarchy, the CS5523-ASZ is a data-acquisition IC, an ADC/DAC, and ultimately a signal-chain and data-conversion component. It is intended for systems that require accurate measurement of slow or moderate-bandwidth analog quantities rather than high-frequency waveform capture.
The CS5523-ASZ provides 16-bit conversion resolution, four selectable analog inputs, differential input architecture, and SPI communication. Its 5 V operating supply and external voltage reference allow the measurement system to use defined voltage references, while the selectable device address supports communication arrangements involving more than one converter. These characteristics make the device useful when a system needs several analog channels, digital access to measurements, and a relatively high-resolution conversion result.
The CS5523 family uses charge-balance techniques to achieve 16-bit performance for the CS5521 and CS5523 versions. This architecture is especially useful for sensor interfaces and measurement systems in which the useful signal is separated from low-frequency noise by the converter's digital filtering. The SPI interface provides a compact, serial path for transferring conversion data to a microcontroller, digital signal controller, or embedded control system.
Typical uses include industrial process monitoring, precision sensor acquisition, laboratory instrumentation, audio and communication equipment, weighing systems, and medical monitoring. In these applications, the four-channel multiplexed architecture reduces the need for separate converters when several related sensors share a common signal-conditioning and grounding environment. Differential input support also permits measurement of small voltage differences across paired sensor outputs.
Design the reference and analog input network carefully because conversion accuracy depends on a stable external reference, suitable input filtering, and separation from noisy digital or switching circuitry. Place decoupling capacitors close to the supply and reference pins, follow the manufacturer's pin-description table when assigning PCB tracks, and evaluate input settling time before using a high multiplexing rate. The complete pin assignment and application circuit should be taken directly from the manufacturer datasheet.
This product record combines the CS5523-ASZ electrical identity with package information, interface characteristics, application guidance, and a strictly footprint-compatible comparison. It is intended to help engineers select the converter, plan the analog and digital layout, and identify same-package alternatives without confusing electrical substitutes with ordinary functional equivalents.
Bộ thay thế dễ dàng lắp đặt cho CS5523-ASZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CS5523-ASZ (cùng hình factor và footprint) — khác nhau ở Operating Temperature Range, Package.
CS5522-ASZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CS5523-ASZR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS5523-ASZ Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Number of Inputs | 4 channels |
| Architecture | Sigma-delta |
| Input Type | Differential |
| Data Interface | SPI |
| Điện áp cung cấp hoạt động | 5 V |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C |
| Hộp | 24-SSOP |
| Package Width | 5.30 mm (0.209 inch) |
| Reference Type | External voltage reference |
| Configuration | Multiplexed ADC |
| Addressing | Selectable address |
| Shipping Packaging | Tube |
| Conversion Technology | Charge-balance technique |
| Output Word Length | 16 bit |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân CS5523-ASZ 5.30 mm (0.209 inch)
Cấu hình chân cho CS5523-ASZ (5.30 mm (0.209 inch) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho CS5523-ASZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS5523-ASZ phù hợp cho 6 Áp dụngs: Industrial Process Sensor Acquisition, Precision Bridge and Differential Sensor Measurement, Laboratory and Portable Instrumentation, Medical and Physiological Monitoring, Audio and Communication Measurement, Weighing and Force Measurement Systems.
Industrial Process Sensor Acquisition
The CS5523-ASZ suits industrial process monitoring when several slow or moderate-bandwidth sensors must be measured by one converter. Its four multiplexed differential inputs reduce the number of separate ADC packages, while 16-bit resolution preserves fine numerical detail in the digital result. The 5 V operating supply and -40 °C to +85 °C specified temperature range support many industrial environments. Place the analog inputs behind appropriately scaled conditioning networks, use a stable external reference, and follow the manufacturer's recommended bypass and grounding arrangement. Channel-switching time must be checked against the sensor settling behavior before the first result is used.
Được đề xuất
Precision Bridge and Differential Sensor Measurement
The four differential inputs of the CS5523-ASZ are well suited to bridge-based measurements where the useful signal appears as a small differential voltage between paired sensor outputs. Its 16-bit conversion result can represent closely spaced measurement values, and multiplexing allows up to four differential input paths to share the converter. The external reference should be selected for the required accuracy and stability, while input filtering must preserve the intended measurement bandwidth. Keep sensitive analog traces away from SPI switching and power-converter nodes. Verify the family's common-mode range, input settling requirements, and recommended front-end values in the manufacturer datasheet before finalizing the bridge network.
Được đề xuất
Laboratory and Portable Instrumentation
The CS5523-ASZ can form the measurement front end of a laboratory instrument, portable analyzer, or process-monitoring display that combines several analog channels with an embedded controller. Four selectable inputs reduce connector and converter overhead, while the SPI interface provides a compact path for transferring results. Because the converter uses a 5 V supply and an external reference, the analog and reference sections should be designed as a coherent measurement system rather than added around an unregulated control board. Use short, shielded analog routing where appropriate, filter high-frequency noise before the multiplexer, and follow the manufacturer application circuit for reference decoupling and input conditioning.
Được đề xuất
Medical and Physiological Monitoring
The CS5523-ASZ is applicable to low-bandwidth medical or physiological monitoring systems that aggregate multiple sensor outputs into a digital measurement stream. Its 16-bit resolution and four differential inputs can reduce the number of conversion channels required for compatible front ends, while the -40 °C to +85 °C temperature specification covers many ambient equipment conditions. Medical use requires additional system-level controls, including input protection, patient isolation where applicable, electromagnetic compatibility, and validation of the complete signal chain. The external reference and analog filtering are especially important because gain, offset, and noise at the converter input directly affect the measured result.
Được đề xuất
Audio and Communication Measurement
The CS5523-ASZ can support audio or communication equipment that requires monitoring several analog levels rather than direct high-rate waveform conversion. Its four multiplexed inputs provide a practical way to supervise audio channels or communication-node measurements, and the 16-bit resolution provides a useful balance between numerical detail and conversion complexity. The sigma-delta architecture and digital filtering are appropriate for measurement bandwidths rather than ultrasonic signal capture. Maintain adequate headroom in the analog front end, control aliasing before multiplexing, and keep the SPI bus and digital return currents separate from sensitive input references. Confirm the family's conversion rate and filter characteristics against the required channel bandwidth.
Được đề xuất
Weighing and Force Measurement Systems
The CS5523-ASZ is suitable for multi-load-cell or weighing systems where small differential sensor voltages must be converted with useful resolution. Four differential inputs can accommodate compatible sensing channels, and the external-reference architecture permits the reference voltage to be selected according to the converter's requirements. A stable reference, careful common-mode design, and shielded low-level routing are essential because offset and noise can dominate a small load-cell signal. Apply the manufacturer's recommended differential-input and reference circuits, verify the input range before adding amplification, and allow sufficient settling time after each multiplexer selection. The 16-bit result should be calibrated with the complete mechanical and analog signal path.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS5523-ASZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CS5522-ASZ | CS5523-ASZR |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 24-SSOP | 24-SSOP | 24-SSOP |
| Resolution | 16 bit | 24 bit | 16 bit |
| Number of Inputs | 4 channels | 4 channels | 4 channels |
| Architecture | Sigma-delta | Sigma-delta | Sigma-delta |
| Data Interface | SPI | SPI | SPI |
| Operating Supply Voltage | 5 V | 5 V | 5 V |
| Reference Type | External voltage reference | External voltage reference | External voltage reference |
| Configuration | Multiplexed ADC | Multiplexed ADC | Multiplexed ADC |
Bảo phân biệt quan trọng
- Four-channel differential input configuration (vsCS5521-ASZ)
- 16-bit resolution preserves more measurement detail than the 24-bit family option (vsCS5522-ASZ)
- Exact electrical configuration with selectable assembly packaging (vsCS5523-ASZR)
Ghi chú thiết kế
Route differential input pairs as closely matched traces with a continuous ground reference, and place their input filtering components near the CS5523-ASZ. Keep the SPI traces and digital return current away from the external reference and sensitive analog inputs. The analog ground and digital-ground arrangement should follow the manufacturer's recommended layout rather than a generic split-plane rule, because excessive ground breaks can create additional reference error in low-level measurements.
Place the recommended supply-bypass capacitor directly between the 5 V supply pin and its return pin, with the shortest practical loop. Treat the external reference as a precision analog node: use a stable source, local decoupling, and routing that avoids switching-current paths. Confirm the allowable reference range, input common-mode range, and power-supply tolerances from the manufacturer datasheet before selecting external components.
Do not assume that a family member with the same package is an automatic drop-in replacement. Resolution, channel count, multiplexing behavior, and timing can differ even when the footprint is shared. After changing between the CS5523-ASZ and CS5522-ASZ, review the pin-description table, startup sequence, conversion timing, and recommended analog circuit. After changing to CS5523-ASZR, verify only the supplier packaging and assembly requirements because the converter configuration is unchanged.
Thông tin tuân thủ
No explicit compliance declarations are identified in the accessible manufacturer-family and distributor information. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before procurement.