CS82C52 - Programmable UART and BRG | Intersil
MPN: CS82C52 ✗ Cuối đờiCS82C52 Tóm tắt
A UART is a serial communication interface that converts parallel data from a controller into a framed serial stream and converts received serial data back into parallel data. The CS82C52 combines this UART function with a programmable baud-rate generator, placing transmit timing, receive timing, and serial-channel control in one CMOS interface IC. This integration reduces the number of external timing components compared with a UART implemented from separate logic.
The verified material describes the CS82C52 as a high-performance programmable UART and BRG on a single chip. Its programmable architecture makes it suitable for systems in which the communication rate must be selected by the host controller or fixed through configuration logic. The RS232 classification identifies the electrical-interface class used by the associated UART function, while the actual board-level signal levels still depend on the transceiver and system design.
Typical uses include embedded serial controllers, legacy industrial control equipment, peripheral interfaces, and communications systems that require a dedicated UART channel. The 28-pin PLCC package provides a defined leaded surface-mount footprint, allowing the part to be used where a compact, inspectable package is preferable to a fine-pitch package. The available data does not provide complete electrical timing tables, supply-voltage limits, or all pin-level details, so those specifications require confirmation from the manufacturer datasheet.
For replacement work, engineers should verify the exact package, pin assignments, electrical limits, timing, temperature grade, and software-visible register behavior before approving a substitute. The device is an older CMOS interface component, so lifecycle status and sourcing should be confirmed at the time of procurement. Pricing and inventory are also time-sensitive and should be checked against current distributor records.
Bộ thay thế dễ dàng lắp đặt cho CS82C52 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếCS82C52 Thông số kỹ thuật
| Product Type | Programmable UART with integrated Baud Rate Generator |
| Manufacturer Description | High-performance programmable UART and BRG on a single chip |
| Communication Architecture | Universal Asynchronous Receiver/Transmitter |
| Number of UART Channels | 1 channel |
| Interface Classification | RS232 UART |
| Process Technology | Advanced Scaled SAJI IV CMOS process |
| Hộp | 28-pin PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Kiểu lắp đặt | Surface mount |
| Operating Temperature, CS82C52 | 0 °C to +70 °C |
| Operating Temperature, IS82C52 | -40 °C to +85 °C |
| Operating Temperature, MD82C52/B | -55 °C to +125 °C |
Hướng dẫn cấu hình chân CS82C52 11.51 mm x 11.51 mm
Cấu hình chân cho CS82C52 (11.51 mm x 11.51 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CS82C52.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS82C52 phù hợp cho 6 Áp dụngs: Embedded Serial Controller Interface, Legacy Industrial Control Communication, Peripheral Communication Port, Legacy Test and Measurement Equipment, RS-232 Point-to-Point Data Links, Legacy Data Acquisition Interface.
Embedded Serial Controller Interface
The CS82C52 fits legacy embedded controllers that need a dedicated asynchronous serial channel instead of a software-emulated UART. Its verified description identifies programmable UART and baud-rate-generator functions on one CMOS chip, allowing the controller to use a hardware-assisted serial interface for command exchange or peripheral communication. The 28-pin PLCC package provides a defined leaded footprint for systems designed around this legacy interface family. Before layout release, verify the complete pinout, supply limits, logic levels, timing, and any required external RS232 transceiver; those details are not fully present in the supplied verified data.
Được đề xuất
Legacy Industrial Control Communication
The CS82C52 can be used in older industrial-control equipment where a dedicated UART and baud-rate generator simplifies serial communication between a controller and a peripheral. The verified Intersil description confirms programmable UART and BRG functionality, while the distributor listing identifies a one-channel RS232 UART IC in a 28-PLCC package. A complete legacy system may require level conversion, isolation, and careful signal grounding. Verify timing, reset behavior, and electrical limits in the manufacturer documentation before adapting it to a new controller; the supplied data does not provide those detailed values.
Được đề xuất
Peripheral Communication Port
The CS82C52 is appropriate for a peripheral subsystem that needs an independent asynchronous serial port for status, configuration, or control data. Its integrated baud-rate generator helps centralize the timing function, which is useful when the host controller has limited serial resources or when deterministic baud-rate programming is required by the original system. The 28-pin PLCC package is suitable for a board design explicitly intended for that footprint. The CS82C52 does not by itself specify the external line standard, so an appropriate transceiver, connector, and protection network must be added after reviewing the actual electrical requirements.
Được đề xuất
Legacy Test and Measurement Equipment
The CS82C52 can support a serial control or data port in legacy test and measurement equipment where a hardware UART is preferable to bit-banged serial transmission. The verified device description confirms programmable UART and baud-rate-generator operation, and the 28-PLCC package is identified by the distributor listing. In an instrument, the UART timing must remain compatible with the existing controller software and the external communications standard. Verify supply voltage, electrical timing, reset behavior, and package pin assignments from the manufacturer datasheet before production use.
Được đề xuất
RS-232 Point-to-Point Data Links
The CS82C52 can form the logical UART portion of a point-to-point RS-232 communications link when paired with an appropriate line transceiver. The verified distributor description classifies the CS82C52 as an RS232 UART IC, while the device description confirms programmable UART and BRG functionality. The UART handles framing and serial timing; the transceiver handles voltage conversion and line protection. Because the complete electrical timing and logic-level information is not included in the supplied data, engineers must confirm compatibility with the selected MAX232-family or other transceiver before releasing the circuit.
Được đề xuất
Legacy Data Acquisition Interface
The CS82C52 may be used as a serial control interface for a legacy data-acquisition subsystem that predates modern USB or network communication. Its programmable baud-rate generator can provide a dedicated timing source for communicating with measurement hardware, a controller board, or a service port. The 28-pin PLCC package means the mechanical design is constrained to that footprint, so replacement or modernization should be treated as a deliberate PCB decision. Verify whether the associated system expects RS-232, another physical standard, or a proprietary voltage-level interface, and confirm all pin and timing details from the authoritative datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS82C52 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 28-pin PLCC, 11.51 mm x 11.51 mm |
| Brand | Intersil / Harris Corporation listing |
| Device Type | Programmable UART with integrated BRG |
| UART Channels | 1 channel |
| Interface Classification | RS232 UART |
| Process Technology | Advanced Scaled SAJI IV CMOS process |
| Operating Temperature, CS82C52 | 0 °C to +70 °C |
| Operating Temperature, IS82C52 | -40 °C to +85 °C |
| Operating Temperature, MD82C52/B | -55 °C to +125 °C |
Bảo phân biệt quan trọng
- Integrated UART and baud-rate generation (vsDiscrete UART and external timing implementation)
- Dedicated one-channel serial interface (vsSoftware-emulated serial port)
- Defined 28-pin PLCC mechanical format (vsGeneric modern UART with a different footprint)
Ghi chú thiết kế
Treat the CS82C52 as a UART/BRG logic device rather than as a complete RS-232 physical layer. Confirm whether the existing board includes a separate line driver, receiver, protection network, or connector. A logic-level UART and an RS-232 transceiver have different voltage domains, so removing or bypassing the transceiver can damage the device. Use the manufacturer pinout and interface schematic before changing the board.
The verified distributor record identifies a 28-PLCC package measuring 11.51 mm by 11.51 mm. Before PCB assembly or replacement, compare the land pattern, pin numbering, orientation mark, and exposed or thermal features against the actual package drawing. Do not infer the footprint from the family name because related 82C52 variants may use PLCC, CLCC, CERDIP, or other package forms.
The available temperature data distinguishes CS82C52, IS82C52, and MD82C52/B variants, so the exact ordering suffix must be checked before using the part in an industrial or extended-temperature design. The supplied material does not provide full electrical-limit or timing tables. Validate the selected suffix against the complete manufacturer datasheet rather than treating the family-level temperature entries as universal specifications.
Thông tin tuân thủ
The supplied verified data does not state RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 status. The component is an older CMOS interface IC, but compliance cannot be inferred from its category or manufacturer.