CS8422-CNZ 24-Bit 192kHz Stereo SRC | Cirrus Logic
MPN: CS8422-CNZ ✗ Cuối đờiCS8422-CNZ Tóm tắt
An asynchronous sample-rate converter is a digital audio IC that resamples an input stream to a different clock domain without requiring both sides to share a common master clock. The CS8422-CNZ belongs to the broader sample-rate converter, digital audio interface, interface IC, and semiconductor hierarchy. Its integrated receiver reduces the number of separate devices required when a system must decode digital audio and convert its sampling rate.
The converter supports 24-bit audio and operation up to 192 kHz for high-resolution digital audio paths. Its integrated digital audio interface receiver decodes data according to EIAJ CP1201, IEC 60958, AES3, and S/PDIF standards. This combination is useful in professional audio equipment, consumer audio processors, digital mixers, and systems that receive digital audio from several source devices running at different sampling rates.
The monolithic CMOS implementation combines stereo asynchronous sample-rate conversion and digital audio reception in one device. That integration can simplify the signal chain and reduce board area compared with separate receiver and SRC components. The converter’s asynchronous architecture is particularly relevant when the source and destination devices do not share a synchronized system clock.
Typical applications include digital audio receivers, studio monitor input stages, surround-sound processors, digital mixers, broadcast equipment, and high-end consumer audio products. The CS8422-CNZ can be used between an S/PDIF or AES3 source and an audio processing path requiring sample-rate conversion, provided the system clock, digital audio format, and channel routing are configured correctly.
Designers should pay particular attention to supported interface modes, master-clock relationships, word-length settings, and the exposed-pad connection of the 32-QFN package. Use the pin-description table and recommended application circuit in the Cirrus Logic datasheet when assigning pins, supplying analog and digital power, and implementing the PCB footprint.
This page organizes the product identity, interface standards, package information, verified alternatives, and practical design considerations into one engineering reference. It also distinguishes confirmed drop-in options from functions that require a different footprint, helping engineers evaluate replacement decisions without confusing similar sample-rate converters with pin-compatible devices.
Bộ thay thế dễ dàng lắp đặt cho CS8422-CNZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CS8422-CSZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CS8422-CNZ Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo asynchronous sample-rate converter with integrated digital audio receiver |
| Audio Resolution | 24 bit |
| Maximum Sample Rate | 192 kHz |
| Channel Count | 2 channels |
| Architecture | Monolithic CMOS |
| Supported Digital Audio Standards | EIAJ CP1201, IEC 60958, AES3, and S/PDIF |
| Hộp | 32-QFN, 5 mm x 5 mm |
| Exposed Pad | Present |
| Kiểu lắp đặt | Surface mount |
| Sample-Rate Conversion Type | Asynchronous |
| Integrated Audio Interface Receiver | Yes |
| Digital Audio Interface | S/PDIF and AES3-compatible |
Hướng dẫn cấu hình chân CS8422-CNZ 32-qfn, 5 mm x 5 mm
Cấu hình chân cho CS8422-CNZ (32-qfn, 5 mm x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CS8422-CNZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CS8422-CNZ phù hợp cho 6 Áp dụngs: Professional Digital Audio Receiver, Studio Monitor Input Conditioning, Digital Mixer and Processor, Surround-Sound Processor, Broadcast Audio Equipment, High-End Consumer Audio Hub.
Professional Digital Audio Receiver
The CS8422-CNZ fits professional digital-audio receiver stages that accept AES3 or S/PDIF and need a clean sample-rate conversion before the signal reaches processing circuitry. Its integrated receiver supports EIAJ CP1201, IEC 60958, AES3, and S/PDIF, while the asynchronous converter supports 24-bit operation up to 192 kHz. Placing the converter after the digital input simplifies clock-domain separation, but the design must establish the required master clocks, channel status handling, and supported word lengths according to the manufacturer’s interface guidance.
Được đề xuất
Studio Monitor Input Conditioning
A studio monitor input stage often combines digital coaxial or optical inputs with external equipment running at a different clock rate. The CS8422-CNZ provides a 24-bit, 192 kHz stereo asynchronous conversion path and can decode AES3 or S/PDIF in the same device, reducing the number of blocks between the source and the monitor DSP. Its 32-QFN package supports compact construction, but exposed-pad grounding and clock jitter performance remain important for preserving low-noise digital-audio behavior.
Được đề xuất
Digital Mixer and Processor
Digital mixers may receive source streams generated under independent clocks, requiring asynchronous conversion before mixing or routing. The CS8422-CNZ handles stereo, 24-bit data at rates up to 192 kHz and combines that function with an AES3 and S/PDIF receiver. This allows a processor to accept a digital source directly, but the system designer must verify channel-status interpretation, master-clock ratios, and valid combinations of input and output sample rates against the Cirrus Logic configuration guidance.
Được đề xuất
Surround-Sound Processor
The CS8422-CNZ can serve as the digital front end of a surround-sound processor that receives a high-resolution AES3 or S/PDIF stream and must adapt it to the processor’s internal rate. Its 24-bit resolution and 192 kHz maximum rate are useful for lossless multichannel distribution, while asynchronous conversion accommodates source and destination clocks that are not phase-locked. The implementation should include controlled clock generation, clearly separated digital and analog supplies, and signal-convention checks for channel ordering and professional audio status bits.
Được đề xuất
Broadcast Audio Equipment
Broadcast installations commonly route AES3 or S/PDIF between studios, transmitters, and production systems whose local clocks can differ. The CS8422-CNZ combines a 24-bit, 192 kHz stereo asynchronous sample-rate converter with a standards-compatible digital audio receiver, making it appropriate for deterministic clock-domain adaptation. The implementation must maintain jitter margin, provide stable master clocks, and verify channel-status and sample-rate combinations required by the broadcast installation.
Được đề xuất
High-End Consumer Audio Hub
A high-end consumer audio hub may need to accept digital sources from television, game systems, and streaming equipment while presenting a consistent rate to the internal DAC. The CS8422-CNZ can receive AES3 or S/PDIF and perform 24-bit asynchronous conversion up to 192 kHz before the signal reaches the conversion stage. Its small 32-QFN footprint helps compact designs, while the exposed-pad construction requires careful PCB layout to maintain thermal and return-current performance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CS8422-CNZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CS8422-CSZ |
|---|---|---|
| Package | 32-QFN (5x5 mm) | 32-QFN (5x5 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| Audio Resolution | 24 bit | 24 bit |
| Maximum Sample Rate | 192 kHz | 192 kHz |
| Channel Count | 2 channels | 2 channels |
| Conversion Architecture | Asynchronous sample-rate converter | Asynchronous sample-rate converter |
| Integrated Digital Audio Receiver | Yes | Yes |
| Supported Audio Interfaces | EIAJ CP1201, IEC 60958, AES3, and S/PDIF | EIAJ CP1201, IEC 60958, AES3, and S/PDIF |
| Implementation | Monolithic CMOS | Monolithic CMOS |
Bảo phân biệt quan trọng
- Integrated receiver and asynchronous converter in one device (vsCS8422-CSZ)
- Standards-aware digital audio input support (vsCS8422-CSZ)
- Compact 5 mm by 5 mm implementation (vsCS8422-CSZ)
Ghi chú thiết kế
Use the manufacturer’s 32-QFN land pattern and exposed-pad guidance directly. Connect the exposed pad to the appropriate ground or power plane with the specified via arrangement, and place input, output, and decoupling connections close to their assigned pins. Treat the package as a high-speed digital device even though its primary function is audio conversion; clock and data traces should have short returns, and switching-node or high-current traces should not run beneath the audio IC.
Separate clock, digital-interface, and analog-supply routing where the datasheet allows it, and place local high-frequency bypass capacitors at the supply pins. Decoupling requirements and capacitor values must follow the Cirrus Logic application circuit because undocumented capacitor choices can alter supply-noise behavior. Keep the exposed-pad current path independent from sensitive input returns to reduce ground bounce and coupling into the asynchronous conversion and digital receiver sections.
Do not substitute a sample-rate converter solely because it offers the same 24-bit or 192 kHz headline rating. The SRC4382 and SRC4392 use 48-pin packages, while the SRC4190 and SRC4192 use 28-pin packages, so none can replace the 32-pin CS8422-CNZ without a PCB redesign. Also validate supported clock ratios, word lengths, channel-status behavior, and digital-audio input modes before configuring the converter in firmware or control software.
Thông tin tuân thủ
The product is an integrated audio interface IC, and no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was found for the CS8422-CNZ.