CY7C65210-24LTXIT - USB 2.0 Billboard Controller | Infineon
MPN: CY7C65210-24LTXIT ✓ Hoạt độngCY7C65210-24LTXIT Tóm tắt
A USB Billboard controller is a dedicated USB interface IC used to expose device capabilities and control information to a USB host. Within the interface-controller hierarchy, it sits between a USB device controller and an embedded peripheral that requires enumeration, configuration, or serial connectivity. The CY7C65210 family combines USB full-speed signaling with I2C, UART, GPIOs, flash memory, and integrated USB termination resistors.
The controller supports USB 2.0 full-speed operation at 12 Mbps and includes native Billboard Device Class Driver support. Its single-channel I2C interface operates as a master up to 400 kHz. Separate transmit and receive buffers provide 190 bytes each, allowing protocol data and short command sequences to be buffered between the USB host and the connected peripheral.
The CY7C65210-24LTXIT also integrates programmable GPIO functions and flash memory for configuration storage. Integrated USB termination resistors reduce the number of external USB signal-conditioning components, while UART connectivity provides an alternate serial path for systems that need to bridge a legacy peripheral. These features support compact designs in which both USB enumeration and application-specific control are required.
Typical applications include USB Type-C configuration-channel controllers, peripheral interface bridges, cable and adapter electronics, industrial USB-to-serial equipment, and embedded systems that need Billboard enumeration alongside I2C or UART. The 4 mm by 4 mm QFN package supports space-constrained products, although its exposed-pad land pattern requires careful PCB layout and adequate copper for heat dissipation.
Designers should follow the manufacturer pin-description and layout guidance when assigning the 24-QFN connections. Place USB routing impedance-controlled, keep the termination and interface paths compact, and verify device power requirements against the manufacturer datasheet. Confirm the complete pin configuration, voltage ratings, and exposed-pad connection before releasing the PCB artwork.
This page combines the manufacturer product description, interface characteristics, package information, drop-in assessment, application guidance, and practical design notes to support component selection and PCB implementation. Use the Request a Quote form on this page for current commercial availability, lead time, and sourcing requirements.
Bộ thay thế dễ dàng lắp đặt cho CY7C65210-24LTXIT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
CY7C65210A-24LTXIT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY7C65210-24LTXIT Thông số kỹ thuật
| Product Type | USB Billboard controller |
| USB Specification | USB 2.0 |
| USB Data Rate | 12 Mbps full-speed |
| I2C Interface Count | 1 channel |
| I2C Master Frequency | 400 kHz maximum |
| Transmit Buffer | 190 bytes |
| Receive Buffer | 190 bytes |
| UART Interface | Supported |
| GPIO Interface | Supported |
| Integrated Flash Memory | Supported |
| Integrated USB Termination Resistors | Supported |
| Billboard Device Class Driver | Native support |
| Hộp | 24-QFN (4 mm x 4 mm) |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân CY7C65210-24LTXIT 24-qfn (4 mm x 4 mm)
Cấu hình chân cho CY7C65210-24LTXIT (24-qfn (4 mm x 4 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CY7C65210-24LTXIT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY7C65210-24LTXIT phù hợp cho 6 Áp dụngs: USB Type-C Configuration Interface, USB-to-I2C Peripheral Bridge, USB Serial Adapter, Industrial USB Monitoring Module, Cable and Adapter Electronics, Embedded Configuration and Enumeration Hub.
USB Type-C Configuration Interface
The CY7C65210-24LTXIT fits USB Type-C products that need a dedicated Billboard controller for host-visible configuration. Its USB 2.0 full-speed interface operates at 12 Mbps, while native Billboard Device Class Driver support simplifies enumeration. The I2C master interface reaches 400 kHz and provides 190-byte transmit and receive buffers for peripheral commands. In a Type-C accessory, the controller can present device capabilities while communicating with an application processor through I2C, UART, or GPIO.
Được đề xuất
USB-to-I2C Peripheral Bridge
The CY7C65210-24LTXIT can bridge a USB full-speed host to an I2C master peripheral. Its single I2C channel supports operation up to 400 kHz, and the independent 190-byte transmit and receive buffers accommodate short command and response sequences. This arrangement is useful when a product needs USB enumeration and configuration while an external sensor, display, or control device remains connected through I2C.
Được đề xuất
USB Serial Adapter
A USB serial adapter can use the CY7C65210-24LTXIT to combine a 12 Mbps full-speed USB interface with UART and I2C connectivity. The controller's Billboard class support allows the host to recognize the adapter as a defined USB function instead of relying on a generic human-interface device. GPIO resources provide additional control or status signaling, while flash memory supports local configuration storage for adapter behavior and identification.
Được đề xuất
Industrial USB Monitoring Module
The CY7C65210-24LTXIT supports compact industrial monitoring modules that combine a USB host connection with embedded control peripherals. USB full-speed operation at 12 Mbps is appropriate for configuration and status traffic, while the I2C master interface can reach 400 kHz for sensors and register-based devices. GPIO adds discrete monitoring or control lines, and flash memory provides a local location for identifiers, calibration data, and device-specific settings.
Được đề xuất
Cable and Adapter Electronics
The 4 mm by 4 mm 24-QFN package makes the CY7C65210-24LTXIT suitable for space-constrained cable and adapter electronics. The controller combines USB 2.0 full-speed signaling, I2C, UART, GPIO, flash memory, and integrated USB termination resistors in one compact device. That integration reduces the number of separate interface components while allowing an adapter to expose configuration, status, or control information to a USB host.
Được đề xuất
Embedded Configuration and Enumeration Hub
The CY7C65210-24LTXIT can serve as a configuration and enumeration interface in embedded systems that require more than a basic USB data path. Native Billboard Device Class Driver support identifies the function to the host, while I2C and UART provide links to application-specific controllers. With 190-byte transmit and receive buffers, the device supports short command exchanges, and its GPIO and flash-memory resources can handle status lines and persistent configuration data.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY7C65210-24LTXIT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY7C65210A-24LTXIT |
|---|---|---|
| Package | 24-QFN (4 mm x 4 mm) | 24-QFN (4 mm x 4 mm) |
| Brand | Infineon | Infineon |
| Product Type | USB Billboard controller | USB Controller |
| USB Version | USB 2.0 | USB 2.0 |
| I2C Interface | Single-channel master, 400 kHz maximum | I2C interface |
| UART Interface | Supported | Supported |
| GPIO Interface | Supported | Supported |
Bảo phân biệt quan trọng
- Integrated interface consolidation (vsCY7C65210A-24LTXIT)
- Native Billboard class support (vsCY7C65210A-24LTXIT)
- Dedicated buffered I2C master (vsCY7C65210A-24LTXIT)
Ghi chú thiết kế
Use the manufacturer package drawing and pin-description table when allocating all 24 QFN lands. Preserve the exposed-pad geometry and thermal-via pattern shown in the reference layout, and place decoupling connections directly at the relevant supply and ground pins. The compact 4 mm by 4 mm footprint leaves little routing margin, so verify every pad and paste-layer dimension against the current manufacturer package drawing before fabrication.
Keep the USB D+ and D+ routing symmetrical and controlled according to the manufacturer layout guidance. Because the controller includes integrated USB termination resistors, avoid adding a redundant termination network without first checking the schematic recommendation. Route the full-speed USB pair away from switching nodes and noisy I2C, UART, and GPIO paths, and minimize branch stubs between the controller and external connector.
Do not assume that a shared 24-QFN outline alone proves replacement compatibility. The CY7C65210A-24LTXIT adds an explicitly listed serial interface, so verify supply pins, enable behavior, I2C mapping, firmware support, and exposed-pad requirements before substituting it. Use the manufacturer pin table to confirm unused connections and follow the documented reference circuit for decoupling and configuration.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for this exact MPN in the available manufacturer and distributor records.