CY7C68013A-100AXI - 48MHz EZ-USB FX2LP | Infineon
MPN: CY7C68013A-100AXI ✗ Cuối đờiCY7C68013A-100AXI Tóm tắt
An EZ-USB FX2LP USB microcontroller is a specialized USB interface controller that places a configurable USB peripheral, USB transceiver, and embedded 8051 processor on one device. Within the product hierarchy, it belongs to the USB interface controller class, then microcontrollers, then integrated circuits and semiconductors. Its principal advantage over a discrete USB system interface controller is that firmware can configure endpoint behavior, packet handling, and data routing without requiring a separate external USB transceiver.
Key features include full-speed and high-speed USB 2.0 operation, 16 KB of internal RAM, 40 GPIO, an enhanced 8051 processor, and integrated USB transceiver circuitry. The controller supports multiple endpoint configurations, allowing a system to buffer data, perform local transformations, or separate streams before transferring them over USB. Its ROMless architecture leaves the final application firmware in external memory, which supports product-specific boot code, device identification, and configuration routines.
The FX2LP architecture is designed for high-throughput peripheral applications where USB bandwidth is more important than general-purpose processor integration. Its 8051 core operates at 48 MHz, while the USB engine handles the protocol and transfer functions. Up to 16 KB of internal RAM provides working space for descriptors, endpoint buffers, status variables, and firmware routines. The 100-pin TQFP package also exposes substantially more GPIO and interface signals than compact 56-pin FX2LP variants.
Typical uses include USB-to-serial adapters, logic analyzers, test and measurement equipment, data acquisition systems, custom USB peripherals, and industrial data-logging products. In a logic analyzer, the GPIO array can capture digital activity while the USB engine transfers buffered samples to a host computer. In an instrumentation product, firmware can implement device-specific protocols and data formats while preserving full-speed and high-speed USB connectivity.
Designers should select external flash and passive components according to the manufacturer's reference circuit, preserve the required USB impedance-controlled layout, and provide correct power, clock, reset, and decoupling arrangements. Firmware planning must also account for endpoint RAM allocation, setup packet handling, and host compatibility. The 100-pin package requires a corresponding 100-pin PCB footprint and careful escape routing around all perimeter leads.
This product page combines manufacturer specifications, package details, search-oriented technical questions, application guidance, and verified same-footprint alternatives. It also identifies lifecycle constraints and organizes practical USB controller design considerations that engineers can apply when planning firmware, PCB layout, and product longevity.
Bộ thay thế dễ dàng lắp đặt cho CY7C68013A-100AXI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY7C68013A-100AXI (cùng hình factor và footprint) — khác nhau ở Maximum USB Data Rate, General-Purpose I/O, Package Type, Processor Core, Product Type.
CY7C68013A-100AXC
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY7C68013-100AXC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY7C68013A-128AXI
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY7C68014A-100AXI
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY7C68013A-100AXI Thông số kỹ thuật
| Product Type | EZ-USB FX2LP USB 2.0 peripheral controller |
| Processor Core | Enhanced 8051 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| USB Standard | USB 2.0 |
| Maximum USB Data Rate | Over 53 MB/s |
| Internal RAM | 16 KB |
| General-Purpose I/O | 40 GPIO |
| Integrated USB Transceiver | Yes |
| Program Memory Architecture | ROMless |
| Hộp | 100-pin TQFP |
| Package Type | 100-LQFP |
| Điện áp cung cấp hoạt động | 3.3 V |
| Temperature Grade | Industrial grade |
| Serial Debug Support | Yes |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân CY7C68013A-100AXI 100-lqfp
Cấu hình chân cho CY7C68013A-100AXI (100-lqfp gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CY7C68013A-100AXI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY7C68013A-100AXI phù hợp cho 6 Áp dụngs: USB Logic Analyzer, High-Speed USB Data Acquisition, USB-to-Serial Bridge, Custom USB Test Equipment, Industrial USB Data Logger, USB Peripherals and dongles.
USB Logic Analyzer
The CY7C68013A-100AXI fits a USB logic analyzer because it provides 40 GPIO, a 48 MHz enhanced 8051 core, and an integrated USB 2.0 transceiver in one controller. Firmware can sample digital lines, maintain capture state in 16 KB of internal RAM, and transfer completed records to a host through programmable endpoints. The 100-pin TQFP provides more peripheral connections than the 56-pin FX2LP variants, making it useful when trigger, capture, status, and configuration signals must coexist. Designers should allocate endpoint RAM carefully, confirm acquisition timing against the GPIO layout, and follow the manufacturer reference circuit for USB routing and decoupling.
Được đề xuất
High-Speed USB Data Acquisition
The CY7C68013A-100AXI is useful in high-speed USB data-acquisition equipment that must aggregate samples or move structured records to a host. Its FX2LP USB engine supports transfer rates above 53 MB/s, while the 48 MHz 8051 processor manages acquisition control, status reporting, and buffer administration. Sixteen kilobytes of internal RAM can hold endpoint state and working buffers, reducing pressure on external storage during short transfer bursts. A practical implementation should define endpoint descriptors early, verify sustained host throughput, and separate analog input circuitry from the digital USB and clock domains to avoid data corruption.
Được đề xuất
USB-to-Serial Bridge
The CY7C68013A-100AXI can implement a dedicated USB-to-serial bridge because it integrates USB transceiver hardware, endpoint logic, and an enhanced 8051 core with two USARTs in the FX2LP family. Firmware can translate between USB bulk transfers and serial traffic, maintain flow control, and expose configuration or diagnostic endpoints over USB. The 48 MHz processing speed supports protocol overhead and buffering, while the 100-pin package offers additional GPIO for status LEDs, control inputs, and peripheral selection. Firmware should implement short receive timeouts, deterministic buffer ownership, and host-driver compatibility testing before release.
Được đề xuất
Custom USB Test Equipment
The CY7C68013A-100AXI suits custom USB test equipment in which a general-purpose host computer must communicate with specialized hardware over a deterministic peripheral interface. Its programmable endpoint architecture can separate command, status, and bulk-data traffic, while 40 GPIO provide interfaces for relays, indicators, clocks, and device-under-test control. The internal 16 KB RAM is useful for command parsing and short transaction buffers. Engineers should define descriptor behavior before PCB layout, reserve endpoints for diagnostics, and validate enumeration under the intended operating-system versions and cable conditions.
Được đề xuất
Industrial USB Data Logger
The CY7C68013A-100AXI is appropriate for an industrial USB data logger that collects sensor or machine-status information and transfers it to a host computer. The industrial-grade ordering designation is relevant for deployments expected to operate beyond commercial-temperature conditions, while the 8051 core handles local control tasks. USB 2.0 bandwidth above 53 MB/s supports efficient batch transfers, and the 100-pin package exposes ample digital I/O. Production designs should still confirm the exact temperature limits, implement robust enumeration recovery, and include a data-integrity check in the firmware and host software.
Được đề xuất
USB Peripherals and dongles
The CY7C68013A-100AXI can serve as the central controller in a USB peripheral or dongle requiring programmable device behavior rather than a fixed USB-to-serial bridge. Firmware can enumerate as a specialized composite device, route data between internal endpoints, and provide configuration through vendor-specific requests. Forty GPIO support status indicators, buttons, storage-control signals, or external converters, while the integrated transceiver minimizes the USB subsystem footprint. Designers should limit endpoint complexity, validate descriptor compatibility with target hosts, and use the datasheet reference layout for differential USB routing, clocking, and supply decoupling.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY7C68013A-100AXI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY7C68013A-100AXC | CY7C68013-100AXC | CY7C68013A-128AXI | CY7C68014A-100AXI |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP | 100-pin TQFP |
Bảo phân biệt quan trọng
- Retains the high-density 100-pin interface while providing 40 GPIO (vsCY7C68013A-56PVXC)
- Uses the industrial-grade ordering designation (vsCY7C68013A-100AXC)
- Combines the 8051 processor and USB transceiver in one controller (vsCY7C68013-100AXC)
Ghi chú thiết kế
Route the USB differential pair as a controlled-impedance pair on a continuous reference plane, following the manufacturer layout reference without adding stubs or test pads that alter impedance. Keep the USB transceiver and crystal or clock circuitry close to their associated controller pins. The 100-pin TQFP footprint also requires careful escape routing for 40 GPIO; preserve short return paths and avoid switching-node or high-current traces beneath sensitive USB and clock nets.
Implement the supply network with the required local ceramic decoupling placed directly at the controller power pins. Use the manufacturer guidance for voltage tolerances, external memory, reset circuitry, and power sequencing rather than generic bulk-capacitor assumptions. Because the device is ROMless, external flash programming and boot-strapping must be included in the power-up design. Verify brownout, reset release, and enumeration behavior across the full supply range before production release.
Do not assume that every same-family 100-pin ordering code is firmware- and lifecycle-equivalent. Before substitution, compare the pin table, clock timing, USB descriptors, endpoint behavior, temperature grade, package markings, and qualification records. For CY7C68013A-100AXC, confirm that commercial-temperature operation is acceptable; for later or related ordering codes, validate the specific suffix meaning rather than treating it as a reel-code change.
Plan USB signal testing at the connector, controller, and any intermediate interface points because reflections or impedance discontinuities can appear as enumeration failures and intermittent transfer errors. Keep external-memory and GPIO routing away from the differential pair where practical, provide a continuous ground reference, and follow the controller's recommended crystal or clock network. Validate simultaneous high-speed transfers and maximum GPIO activity rather than testing only idle enumeration.
Estimated: USB high-speed operation and the 48 MHz embedded processor create dynamic supply demand even though the controller does not regulate a large external load. Scope input-rail droop during enumeration and sustained transfers, using the actual host, cable, and flash configuration. Preserve local bulk capacitance only as specified by the manufacturer, and avoid adding large capacitors directly to the USB pins because excessive capacitance can degrade signal integrity.
Thông tin tuân thủ
No explicit compliance declaration for the exact ordering code was identified in the manufacturer information or distributor excerpts. The device is an industrial-grade USB interface controller rather than an automotive-qualified product.