CY7C68015A-56PVXC - Low-Power USB 2.0 Controller | Infineon
MPN: CY7C68015A-56PVXC ✓ Hoạt độngCY7C68015A-56PVXC Tóm tắt
An EZ-USB FX2LP controller is a USB interface IC and an application-specific microcontroller. It belongs to the broader hierarchy of interface ICs, USB controllers, peripheral controllers, embedded microcontrollers, and semiconductors. Unlike a conventional fixed-function USB transceiver, the FX2LP architecture can divide USB traffic among multiple endpoint buffers, support control, bulk, and interrupt transfers, and connect external parallel data buses to the USB host through a deterministic, firmware-controlled protocol.
The CY7C68015A is positioned as the low-power member of the EZ-USB family, with additional GPIO and communication features intended for non-battery-powered applications. USB 2.0 high-speed operation, internal endpoint buffering, and programmable firmware make the controller suitable for data acquisition systems, test equipment, industrial peripherals, communications equipment, and custom USB bridges. The 56-pin SSOP package provides a practical option for compact board designs requiring a high pin count and external peripheral connectivity.
Engineering designs should pay close attention to USB signal routing, crystal and clock requirements, supply decoupling, firmware initialization, and endpoint memory allocation. The SSOP footprint has fine lead pitch and requires a careful PCB layout with short differential USB traces, continuous reference planes, and minimized stub lengths. Power sequencing, ground-plane continuity, and proper crystal loading are equally important for reliable enumeration across multiple host environments.
This product page combines manufacturer-oriented device information, distributor listings, family cross-reference results, and application-specific engineering guidance. It emphasizes the role of the CY7C68015A-56PVXC as a configurable USB 2.0 peripheral controller rather than presenting the device merely as a generic interface IC. Buyers should compare the exact package suffix, firmware compatibility, electrical requirements, and USB behavior of any replacement before committing to a drop-in substitution.
Bộ thay thế dễ dàng lắp đặt cho CY7C68015A-56PVXC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY7C68015A-56PVXC (cùng hình factor và footprint) — khác nhau ở Package, GPIO Count, Product Type.
CY7C68013A-56PVXC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CY7C68015A-56LTXC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CY7C68013A-56LTXI
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CY7C68015A-56PVXC Thông số kỹ thuật
| Product Type | USB 2.0 peripheral controller |
| Device Family | EZ-USB FX2LP |
| USB Speed | USB 2.0 high-speed |
| Core | 8051-compatible embedded core |
| Hộp | 56-pin SSOP |
| GPIO Count | 24 GPIO |
| Kiểu lắp đặt | Surface mount |
| Trạng thái vòng đời | Active |
Hướng dẫn cấu hình chân CY7C68015A-56PVXC 56-pin ssop
Cấu hình chân cho CY7C68015A-56PVXC (56-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CY7C68015A-56PVXC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY7C68015A-56PVXC phù hợp cho 6 Áp dụngs: High-Speed USB Data Acquisition, Industrial USB-to-Parallel Bridge, USB Test and Measurement Instrument, Custom USB Communications Adapter, USB-Controlled LED and Lighting System, Portable USB Diagnostic Device.
High-Speed USB Data Acquisition
The CY7C68015A-56PVXC fits custom data-acquisition peripherals because its USB 2.0 high-speed controller and programmable endpoint architecture can transfer samples or control data between a host and an external acquisition engine. The embedded 8051-compatible core handles enumeration, endpoint control, and protocol sequencing, while the 24 GPIO support status signals, triggers, and supervisory functions. Designers should size endpoint buffers according to the acquisition format and measure the actual throughput with the intended firmware, since protocol overhead and external bus timing determine usable bandwidth. Differential USB routing, continuous grounding, local decoupling, and a controlled clock arrangement are essential for reliable operation across multiple USB hosts.
Được đề xuất
Industrial USB-to-Parallel Bridge
The CY7C68015A-56PVXC is suitable for industrial USB-to-parallel bridges that expose legacy acquisition, control, or machine interfaces to a modern USB host. Firmware can define the protocol, endpoint scheduling, and data framing, while the extra GPIO can carry direction, handshake, fault, and ready signals. Its 56-pin SSOP package provides access to a broad set of controller and general-purpose signals without requiring a separate USB interface IC. For factory equipment, isolate noisy motor and relay wiring from the USB domain, maintain a single uninterrupted ground reference where required, and validate suspend and resume behavior against the complete system power budget.
Được đề xuất
USB Test and Measurement Instrument
The CY7C68015A-56PVXC can implement a custom USB test or measurement peripheral when a fixed-function instrument protocol is insufficient. Its programmable endpoint behavior allows waveform data, configuration commands, and status information to be separated into appropriate USB transfers, while the embedded controller manages enumeration and device-specific firmware. The 24 GPIO can support trigger inputs, relay control, interlock signals, and front-panel status. Use a low-noise layout around the analog section even though the USB controller itself is digital, and test hot-plug, suspend, resume, and repeated enumeration across operating systems. Firmware versioning should be included in the instrument’s USB descriptor so host software can identify compatible revisions.
Được đề xuất
Custom USB Communications Adapter
The CY7C68015A-56PVXC supports custom communications adapters that need a programmable USB endpoint structure rather than a fixed virtual COM device. Firmware can implement framing, acknowledgments, device discovery, and command handling while the controller transfers data to an external communications processor or microcontroller. The extra GPIO provides ready, busy, reset, and fault signaling for the attached peripheral. For dependable host-to-device communication, specify endpoint bandwidth for both bulk and interrupt traffic, avoid relying on undocumented timing, and test behavior when the host suspends the device. The SSOP layout also warrants thermal inspection under sustained high-rate transfer workloads.
Được đề xuất
USB-Controlled LED and Lighting System
The CY7C68015A-56PVXC can act as the USB control element in programmable lighting, status-indicator, and laboratory illumination systems. Its GPIO outputs can drive enable or selection lines for external driver circuits, while firmware maintains lighting sequences, brightness commands, and device status over USB. Because the controller does not directly establish the lighting output capability, the external driver stage must be selected for the required current and voltage. Keep high-current or switching outputs physically separated from the USB and clock traces, provide local return paths, and use firmware-defined limits to prevent excessive channel activity. A configurable protocol also allows host software to update scenes without requiring a dedicated user-interface controller.
Được đề xuất
Portable USB Diagnostic Device
The CY7C68015A-56PVXC fits portable diagnostic equipment that enumerates as a custom USB peripheral and exchanges structured records with a laptop or service tablet. Low-power-oriented FX2LP variants are useful when the product spends significant time idle or operating from a limited power budget, but the complete system must still evaluate sleep current and wake behavior. Firmware can expose diagnostic results through dedicated endpoints while GPIO handles switches, indicators, and external triggers. Designers should minimize the number of always-active external loads, provide a clean USB connection path, and validate battery life under realistic idle and transfer conditions before finalizing the enclosure and cable strategy.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY7C68015A-56PVXC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY7C68013A-56PVXC | CY7C68015A-56LTXC | CY7C68013A-56LTXI |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP | 56-pin SSOP |
| Device Family | EZ-USB FX2LP | EZ-USB FX2LP | EZ-USB FX2LP | EZ-USB FX2LP |
| Core Architecture | Embedded 8051-compatible controller | EZ-USB FX2LP embedded controller | EZ-USB FX2LP embedded controller | EZ-USB FX2LP embedded controller |
| Package Suffix | 56PVXC | 56PVXC | 56LTXC | 56LTXI |
Bảo phân biệt quan trọng
- Low-power FX2LP positioning with additional GPIO and communication functions (vsCY7C68013A-56PVXC)
- Exact family and package configuration (vsCY7C68015A-56LTXC)
- Site-linked family candidate for design evaluation (vsCY7C68013A-56LTXI)
Ghi chú thiết kế
Route USB D-plus and D-minus as a short, tightly coupled differential pair with a continuous reference plane and no unnecessary stubs. Place any USB-series impedance-control elements close to the controller according to the manufacturer reference design. Keep switching regulators, crystal circuitry, and high-current outputs away from these nets to minimize radiated emissions and improve enumeration reliability.
Provide local high-frequency and bulk decoupling at the controller supply pins, following the capacitance and placement requirements in the manufacturer application circuit. Confirm the device's operating and I/O voltage ranges before connecting external logic. If 3.3 V peripherals share the board, check signal-level compatibility and sequencing so no external device drives a pin before the controller supply is valid.
Use a continuous ground plane and route the crystal, its load components, and associated traces as short as practical. Avoid placing test pads or high-speed switching nodes near clock and USB nets. The 56-pin SSOP footprint also requires a narrow assembly process window, so verify pad dimensions, solder mask, paste volume, and component orientation against the current package drawing.
Do not treat a family-related MPN as an automatic replacement. Compare the exact pin descriptions, clock source, reset behavior, suspend current, endpoint resources, firmware support, and package suffix of the target and candidate. A 56-pin SSOP designation confirms the general footprint family, but it does not by itself prove identical lead finishing, temperature grade, or board-handling characteristics.
Thông tin tuân thủ
Compliance declarations were not identified in the available manufacturer and distributor information. Confirm the current material compliance and qualification statements using the exact MPN and its orderable package suffix.
