CY8C3444LTI-111 - 50MHz 16KB Flash 8-Bit MCU | Infineon
MPN: CY8C3444LTI-111 ✓ Hoạt độngCY8C3444LTI-111 Tóm tắt
A programmable system-on-chip is a mixed-signal microcontroller architecture that places configurable hardware blocks alongside a CPU and embedded nonvolatile memory. In the broader hierarchy, the CY8C3444 belongs to the PSoC 3 family of Flash-programmable system-on-chip devices. Its 8051-based processing core executes embedded control software, while its configurable peripheral array can be adapted to functions such as timing, serial communication, analog conditioning, and user-defined digital logic.
The CY8C3444LTI-111 combines a maximum CPU frequency of 50 MHz with 16 KB of Flash program memory in an industrial-temperature, no-lead package. The 68-QFN construction supports dense surface-mount layouts where connector count and board area are constrained. Because the same MCU family supports multiple programmable peripheral resources, designers can consolidate functions that might otherwise require separate logic devices or analog interface circuits.
The device belongs to the CY8C34 PSoC 3 family, whose architecture uses a Flash-programmable system-on-chip approach rather than a fixed peripheral-only design. Programming and configuration are handled through the family's development tools, allowing configured blocks to support application-specific control functions. This architecture is useful when product requirements evolve because software-controlled configurations can adapt the peripheral behavior without changing the external circuit footprint.
Typical uses include industrial monitoring and control, compact sensor interfaces, consumer equipment, and embedded products requiring a low pin count. The 50 MHz processing rate supports time-sensitive control tasks, while the 8-bit architecture and integrated programmable resources favor cost-conscious embedded applications. Applications requiring extensive RAM, a larger Flash program space, high-resolution analog conversion, or advanced connectivity should be evaluated against the exact family member rather than assuming all PSoC 3 devices provide identical resources.
PCB implementation requires careful treatment of the exposed ground connection and high-speed clock signals. Place the Flash-programming interface, decoupling capacitors, and analog or digital peripheral connections according to the manufacturer pin descriptions and recommended layout guidance. Confirm the exposed-pad connection and package orientation during assembly because the no-lead 68-QFN footprint has closely spaced perimeter terminals.
This product record combines the verified orderable configuration, family-level electrical characteristics, package information, practical PCB considerations, and a drop-in-oriented comparison with closely related CY8C3444 variants. It is intended to accelerate engineering selection while preserving the distinction between confirmed part attributes and parameters that require confirmation from the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho CY8C3444LTI-111 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CY8C3444LTI-111 (cùng hình factor và footprint) — khác nhau ở CPU Architecture, Package, Product Family, Product Type, Program Memory.
CY8C3444LTI-110
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY8C3444LTI-113
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →CY8C3444LTI-119T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CY8C3444LTI-111 Tỷ lệ tối đa & tính chất điện
| Product Type | Flash-programmable system-on-chip (PSoC 3) |
| CPU Architecture | 8051, 8-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory | 16 KB Flash (16K x 8) |
| SRAM | 2 kByte |
| Product Family | PSoC 3 CY8C34 family |
| Hộp | 68-QFN (8 mm x 8 mm) |
| Package Code | HVQCCN |
| Terminal Count | 68 terminals |
| Package Shape | Square, no lead |
| Kiểu lắp đặt | Surface mount |
| Temperature Grade | Industrial |
| Programmable Peripherals | Configurable digital and analog peripheral blocks |
| Nonvolatile Program Storage | Embedded Flash |
Hướng dẫn cấu hình chân CY8C3444LTI-111 square, no lead
Cấu hình chân cho CY8C3444LTI-111 (square, no lead gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho CY8C3444LTI-111.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CY8C3444LTI-111 phù hợp cho 6 Áp dụngs: Industrial Monitoring and Control, Compact Sensor Interface, Consumer Equipment Controller, LED Lighting Control, Battery-Powered Embedded Product, Communications Front End.
Industrial Monitoring and Control
The CY8C3444LTI-111 fits compact industrial controllers that combine periodic sensor acquisition, digital filtering, and actuator control. Its 50 MHz 8051 CPU provides deterministic execution for the 16 KB Flash program space, while configurable PSoC blocks can offload repetitive timing, communication, or signal-generation tasks. The 68-QFN package reduces board footprint, although its exposed thermal pad and fine terminal pitch require careful PCB design and assembly control. For production designs, validate the final operating temperature, isolation strategy, EMC requirements, and long-term component availability against the complete family datasheet.
Được đề xuất
Compact Sensor Interface
The CY8C3444LTI-111 can serve as the controller for a compact sensor node that must sample inputs, apply configuration, and report results over a serial interface. Its configurable peripheral architecture allows timing, digital logic, and analog-related functions to be combined within a single programmable device, reducing the need for separate support ICs. The 50 MHz CPU supplies ample headroom for modest filtering and protocol handling within the 16 KB Flash limit. Designers should allocate memory early, account for calibration data, and isolate analog inputs from switching and high-current return paths on the PCB.
Được đề xuất
Consumer Equipment Controller
For consumer products requiring several low-speed control functions, the CY8C3444LTI-111 integrates an 8-bit 8051 core, 16 KB of Flash, and configurable peripheral blocks in an 8 mm by 8 mm QFN package. This configuration is useful in appliances, personal-care equipment, and compact accessories where an economical controller with a small footprint is preferable to a larger general-purpose MCU. Program-memory capacity must be checked against the compiled firmware and boot or update requirements. Firmware should also include production testing, brownout handling, and safe state behavior for actuators.
Được đề xuất
LED Lighting Control
The CY8C3444LTI-111 is suitable for LED lighting modules that require timed dimming, button handling, status indication, and configurable switching outputs. Its 50 MHz 8051 processor can execute control logic and state machines within the 16 KB Flash budget, while PSoC peripheral blocks can provide timing and general-purpose digital functions. The device does not directly specify an LED driver topology in the confirmed orderable data, so an appropriate external transistor or constant-current driver must be selected separately. PCB design should keep LED-current paths away from sensitive control signals and preserve adequate thermal copper around the QFN exposed pad.
Được đề xuất
Battery-Powered Embedded Product
The CY8C3444LTI-111 can serve as the central controller in a small battery-powered product that combines low-duty-cycle sensing with local control. The 8051 architecture and embedded Flash support a compact firmware footprint, while configurable peripherals can reduce repeated CPU activity when functions do not require continuous processing. The 68-QFN package helps minimize board area in wearable-adjacent or portable products. Power-budget calculations should include sleep behavior, run current, external pull networks, and peripheral leakage. Battery life must be verified under the actual duty cycle rather than estimated from processor frequency alone.
Được đề xuất
Communications Front End
The CY8C3444LTI-111 can control a low-speed communications front end that requires deterministic framing, timeout handling, status reporting, and configurable digital functions. Its 50 MHz CPU handles protocol tasks while the programmable peripheral array can support timers, serial interfaces, or custom logic around the application processor. The 16 KB Flash constraint favors compact protocol stacks, so software size should be measured early in development. PCB routing should separate communication signals from switching nodes, preserve controlled return paths, and follow the manufacturer guidance for exposed-pad grounding and clock integrity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CY8C3444LTI-111 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CY8C3444LTI-110 | CY8C3444LTI-113 | CY8C3444LTI-119T |
|---|---|---|---|---|
| Package | 68-QFN (8 mm x 8 mm) | 68-QFN (8 mm x 8 mm) | 68-QFN (8 mm x 8 mm) | 68-QFN (8 mm x 8 mm) |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Product Type | 8051 PSoC 3 CY8C34xx Microcontroller | 8051 PSoC 3 CY8C34xx Microcontroller | 8051 PSoC 3 CY8C34xx Microcontroller | PSoC 3 CY8C34 Family MCU |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8051 |
Bảo phân biệt quan trọng
- Matched CPU and memory configuration (vsCY8C3444LTI-110)
- Same-family architecture reduces migration scope (vsCY8C3444LTI-113)
- Closest confirmed same-family configuration (vsCY8C3444LTI-119T)
Ghi chú thiết kế
Follow the manufacturer land pattern for the 68-QFN package, including the exposed thermal pad and its ground connection. Use the recommended via arrangement to limit thermal resistance and maintain solderability. Place bypass capacitors adjacent to their assigned supply pins and keep high-current return paths from passing beneath sensitive analog or clock nets. Confirm pin 1 orientation and pad dimensions against the mechanical drawing before releasing artwork.
Route clock and programmable peripheral signals away from switching-node traces, inductors, and connectors that can inject noise. Use a continuous ground reference beneath signal paths where practical, avoid splits under the QFN footprint, and keep the Flash-programming interface traces short. If the design uses sensitive analog functions, isolate their inputs from digital return currents and validate filtering and grounding with oscilloscope measurements on the assembled board.
Do not select a replacement solely because the package and CPU frequency match. Review the complete ordering-code definition, temperature range, electrical limits, Flash-programming interface, and qualification status for every CY8C3444 suffix. The 16 KB Flash limit also requires an early firmware-size check, including bootloader, calibration, and update code. A PCB footprint match does not by itself guarantee software, timing, or environmental compatibility.
Thông tin tuân thủ
Compliance attributes require confirmation from the current manufacturer product declaration or material compliance documentation.