DG302ACJ+ - Dual 50Ω DPST Analog Switch | Analog Devices
MPN: DG302ACJ+ ✓ Hoạt độngDG302ACJ+ Tóm tắt
An analog switch is an integrated semiconductor device that connects or isolates circuit nodes under digital control. The DPST configuration provides one normally closed and one normally closed? No—the DG302 family uses break-before-make switching behavior. In system-level terms, the part belongs to the analog switch and multiplexer hierarchy, where it sits between signal sources and downstream measurement or processing circuits. Unlike a mechanical relay, it changes state electronically without mechanical wear.
The DG302ACJ+ combines low power operation with fast switching characteristics and strong DC and AC switch performance. Its on-resistance is specified as less than 50 Ω and is described as essentially constant across the analog signal range. Fully TTL- and CMOS-compatible control inputs simplify interfacing with microcontrollers, logic families, and test equipment. Break-before-make operation prevents the two switch paths from momentarily connecting together during a transition, while low charge injection helps limit unwanted transients on sensitive signals.
The Analog Devices DG302A family is designed for battery-powered circuitry and operates from ±5 V to ±18 V. The manufacturer also identifies the DG300 through DG303 and DG300A through DG303A families as electrically compatible and pin compatible with original-manufacturer devices. That family-level compatibility is useful for industrial-control, instrumentation, test-and-measurement, and legacy equipment designs, although individual device ratings must be checked before substitution.
Typical uses include switching sensor outputs, selecting test paths, routing multiplexed measurement channels, and controlling bipolar analog signals in laboratory or industrial equipment. The device is particularly useful when the control system uses TTL or CMOS logic and the switched signal remains within the device's supported voltage and signal-range limits.
Designers should preserve adequate supply decoupling and route sensitive analog traces away from high-current switching paths. Because this is a through-hole DIP device, its relatively large package and lead spacing make it especially appropriate for legacy-style PCBs, prototyping systems, and repair assemblies rather than compact mixed-signal layouts.
This page combines the DG302A family specifications with practical routing guidance, verified drop-in candidates, and a parameter-by-parameter comparison. It also distinguishes the exact DG302ACJ+ ordering code from nearby DG302-family devices so engineers can identify a pin-compatible replacement without overlooking package, qualification, or supply details.
Bộ thay thế dễ dàng lắp đặt cho DG302ACJ+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
DG302ACJ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG302AK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG302BK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG302BDJ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG3012AAK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DG302ACJ+ Tỷ lệ tối đa & tính chất điện
| Product Type | Dual-channel CMOS analog switch |
| Switch Configuration | 2:1, dual DPST |
| Number of Circuits | 2 circuits |
| On-Resistance | <50 Ω |
| Supply Voltage Range | ±5 V to ±18 V |
| Control Logic Compatibility | Fully TTL and CMOS compatible |
| Switching Behavior | Break-before-make |
| Charge Injection | Low |
| Power Consumption | Low-power operation |
| Switching Speed | Fast switching time |
| DC Switch Characteristics | Superior DC characteristics |
| AC Switch Characteristics | Superior AC characteristics |
| Hộp | 14-pin DIP |
| Kiểu lắp đặt | Through-hole |
| Lead Spacing | 0.300 in (7.62 mm) |
| Temperature Grade | Commercial |
| Surface Mount | No |
Hướng dẫn cấu hình chân DG302ACJ+ 14-pin dip
Cấu hình chân cho DG302ACJ+ (14-pin dip gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DG302ACJ+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DG302ACJ+ phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Routing, Industrial Test Signal Multiplexing, Analog Signal Isolation, Precision Measurement and Instrumentation, Legacy Equipment Repair, Control and Signal-Path Switching.
Battery-Powered Sensor Routing
The DG302ACJ+ fits low-power sensor-front-end designs that need to route bipolar measurement signals without using mechanical relays. Its dual DPST channels can isolate a sensor from an instrumentation amplifier during calibration or test, while the below-50-Ω on-resistance limits added attenuation. TTL- and CMOS-compatible control inputs allow direct control from a low-power microcontroller or logic circuit. Because the manufacturer identifies the DG302A family for battery-powered circuitry, it is also appropriate for portable instruments where low power, compact logic interfacing, and controlled signal transitions are priorities.
Được đề xuất
Industrial Test Signal Multiplexing
The DG302ACJ+ can select test signals in industrial and laboratory measurement equipment while keeping control logic simple. Two independently controlled DPST channels support signal isolation, source selection, or measurement-path routing, and the less-than-50-Ω switch resistance helps preserve signal amplitude. Break-before-make operation prevents the old and new paths from overlapping during a transition, while low charge injection limits unwanted transient energy at sensitive inputs. The 14-pin DIP package is particularly convenient for legacy test-system boards and through-hole prototype assemblies.
Được đề xuất
Analog Signal Isolation
The DG302ACJ+ is appropriate for isolating an analog branch when it must be disconnected from a shared measurement chain. Its DPST topology, on-resistance below 50 Ω, and essentially constant resistance across the analog range support consistent signal transfer while closed. When open, the switch provides a way to reduce interactions between channels without relay-level mechanical complexity. Low charge injection is valuable when the isolated node feeds high-impedance circuitry, although board-level leakage and off-state behavior should still be evaluated for the intended source impedance and bandwidth.
Được đề xuất
Precision Measurement and Instrumentation
The DG302ACJ+ supports precision measurement systems that need dependable path selection around amplifiers, converters, and reference nodes. The below-50-Ω on-resistance reduces attenuation compared with a higher-resistance switch, while the family's low charge injection helps protect signals from control-transition disturbance. Fully TTL- and CMOS-compatible control inputs make it straightforward to include the device in automated or semi-automated test equipment. For instrumentation designs, place sensitive analog nodes close to the switch and separate control traces to minimize capacitive coupling into the measurement path.
Được đề xuất
Legacy Equipment Repair
The DG302ACJ+ is well suited to maintaining equipment built around through-hole analog-switch sockets and DIP layouts. Its 14-pin package and family-level pin compatibility make it easier to evaluate than a surface-mount replacement that would require board changes. The original DG302ACJ ordering code and DG302-family alternatives can be used as candidates when their individual ratings match. Before installation, verify the control thresholds, supply connections, switching timing, and signal polarity in the manufacturer data sheet rather than relying solely on the visible package outline.
Được đề xuất
Control and Signal-Path Switching
The DG302ACJ+ can combine signal selection with control functions in equipment that uses a common digital command architecture. Each DPST channel offers independent routing capability, and the break-before-make characteristic helps avoid connecting two driven nodes together during a state change. Low power operation supports portable systems, while the wide ±5 V to ±18 V family supply range accommodates bipolar analog environments. System designers should ensure that control signals remain within the rated input range and that switched nodes never exceed the device's specified voltage and current limits.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DG302ACJ+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DG302ACJ | DG302AK | DG302BK | DG302BDJ | DG3012AAK |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Vishay |
| Package | 14-pin DIP | 14-pin DIP | 14-pin DIP | 14-pin DIP | 14-pin DIP | 14-pin DIP |
| Circuit Configuration | Dual DPST | Dual DPST | Dual DPST | Dual DPST | Dual DPST | Dual DPST |
| Number of Circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits | 2 circuits |
Bảo phân biệt quan trọng
- Exact DG302A-family device with plus-suffix ordering code (vsDG302ACJ)
- Break-before-make operation reduces transition overlap (vsDG3012AAK)
- Low charge injection supports sensitive signal routing (vsDG3012AAK)
- Wide bipolar supply operation (vsDG302BDJ)
Ghi chú thiết kế
Treat the control inputs as high-impedance digital nets and keep their traces away from sensitive analog conductors. The DG302A family uses fully TTL- and CMOS-compatible control inputs, but the timing of those inputs can still capacitively couple charge into nearby switched nodes. For instrumentation boards, route each control line directly toward its device pin, avoid sharing a long path with an analog input, and place a ground reference adjacent to the relevant signal traces where the layout permits.
Account for both the below-50-Ω on-resistance and the off-state behavior when calculating measurement accuracy. The manufacturer describes the on-resistance as essentially constant across the analog signal range, but signal-transfer errors also depend on source impedance, load impedance, leakage, switch capacitance, and frequency. For high-impedance sensors, validate the complete switched path on a prototype instead of attributing all observed errors to the switch alone.
Do not assume that a matching 14-pin DIP outline proves that any DG302-family device is interchangeable. Verify control thresholds, supply arrangement, channel behavior, switch timing, and signal ratings in the manufacturer data sheet for the exact ordering code. In particular, check the manufacturer's Pin Configurations section before fitting DG302ACJ, DG302AK, DG302BK, DG302BDJ, or the Vishay DG3012AAK candidate to a populated board.
Provide the device with the bipolar supply arrangement required by the selected DG302A-family configuration and decouple the supply pins close to the package. Although the family is associated with low-power and battery-powered circuitry, the complete power budget includes quiescent supply current and any load current through the switched path. Use local grounding and stable reference returns to prevent switch transitions from producing supply disturbance in sensitive downstream circuitry.
Thông tin tuân thủ
The verified product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the device is an analog switch rather than an automotive-qualified integrated circuit.