Microchip Technology
DSPIC30F5016T-20E/PT - dsPIC30F 20MIPS 66KB Flash DSC | Microchip
MPN: DSPIC30F5016T-20E/PT ✓ Hoạt động
4.5 V to 5.5 V Vdss
80-TQFP (12x12 mm) Package
40 MHz Speed
66 KB (22K x 24) Memory
MOQ: 1 |
DSPIC30F5016T-20E/PT Tóm tắt
The Microchip DSPIC30F5016T-20E/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC30F family, delivering 20 MIPS of computational throughput at a 40 MHz clock speed in an 80-pin TQFP (12x12 mm) package. It integrates 66 KB of Flash program memory (22K x 24), 2 KB of RAM, and 1 KB of EEPROM, while exposing 60 general-purpose I/O pins for peripheral expansion and system interconnect.
A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine for single-cycle MAC operations. Within the broader taxonomy, a DSC bridges microcontroller -> microcontroller with DSP -> digital signal controller -> embedded processor -> semiconductor. The dsPIC30F5016 specifically targets motor control, digital power conversion, and real-time sensor processing applications where deterministic math throughput is critical.
Key features include a 16-bit modified Harvard architecture with DSP dual-operand fetch, a 12-bit ADC with up to 16 channels and 200 ksps conversion rate, motor-control PWM with up to 8 outputs, and integrated communications peripherals: CAN, I2C, SPI, and UART/USART. The device operates from a 4.5 V to 5.5 V supply across the extended -40 C to +125 C industrial temperature range and includes 5 input capture and 5 output compare modules for precise event timing.
The DSP engine executes a 17 x 17-bit signed fractional or integer multiply in a single cycle with 40-bit accumulator support, enabling real-time closed-loop control loops such as field-oriented control (FOC) for three-phase motors without CPU offloading. The dsPIC30F5016 also incorporates a CRC engine, watchdog timer, and multiple power-saving modes for safety-critical embedded designs.
Typical applications include AC induction and BLDC motor drives, digital uninterruptible power supplies (UPS), variable-frequency drives (VFDs), power-factor correction converters, automotive sensor interfaces, and industrial automation controllers. The wide operating voltage and -40 C to +125 C range make it suitable for both factory-floor and automotive underhood deployments.
When designing with the DSPIC30F5016T-20E/PT, ensure that the ADC input impedance and acquisition time settings match the source impedance to avoid conversion errors, and place the device on a 4-layer PCB with a solid ground plane to manage switching noise from the PWM outputs. The 'T' suffix denotes tape-and-reel packaging, while the '20E' suffix denotes the 20 MIPS speed grade and extended temperature range.
A Digital Signal Controller (DSC) is a hybrid class of microcontroller that combines a standard MCU instruction set with a dedicated DSP engine for single-cycle MAC operations. Within the broader taxonomy, a DSC bridges microcontroller -> microcontroller with DSP -> digital signal controller -> embedded processor -> semiconductor. The dsPIC30F5016 specifically targets motor control, digital power conversion, and real-time sensor processing applications where deterministic math throughput is critical.
Key features include a 16-bit modified Harvard architecture with DSP dual-operand fetch, a 12-bit ADC with up to 16 channels and 200 ksps conversion rate, motor-control PWM with up to 8 outputs, and integrated communications peripherals: CAN, I2C, SPI, and UART/USART. The device operates from a 4.5 V to 5.5 V supply across the extended -40 C to +125 C industrial temperature range and includes 5 input capture and 5 output compare modules for precise event timing.
The DSP engine executes a 17 x 17-bit signed fractional or integer multiply in a single cycle with 40-bit accumulator support, enabling real-time closed-loop control loops such as field-oriented control (FOC) for three-phase motors without CPU offloading. The dsPIC30F5016 also incorporates a CRC engine, watchdog timer, and multiple power-saving modes for safety-critical embedded designs.
Typical applications include AC induction and BLDC motor drives, digital uninterruptible power supplies (UPS), variable-frequency drives (VFDs), power-factor correction converters, automotive sensor interfaces, and industrial automation controllers. The wide operating voltage and -40 C to +125 C range make it suitable for both factory-floor and automotive underhood deployments.
When designing with the DSPIC30F5016T-20E/PT, ensure that the ADC input impedance and acquisition time settings match the source impedance to avoid conversion errors, and place the device on a 4-layer PCB with a solid ground plane to manage switching noise from the PWM outputs. The 'T' suffix denotes tape-and-reel packaging, while the '20E' suffix denotes the 20 MIPS speed grade and extended temperature range.
Bộ thay thế dễ dàng lắp đặt cho DSPIC30F5016T-20E/PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DSPIC30F5016T-20E/PT (cùng hình factor và footprint) — khác nhau ở ADC, Package, Operating Temperature, Core Architecture, Maximum CPU Speed.
Microchip Technology
ADC: 6-channel, 10-bit, 1 Msps
Package: TQFP-44 (10x10 mm, 1 mm height)
Operating Temperature: -40 C to +125 C (E = Enhanced)
Microchip Technology
ADC: 10-bit, 16-channel, up to 500 ksps
Package: 64-pin TQFP (10x10 mm), PT suffix
Operating Temperature: -40C to +85C (Industrial)
Microchip Technology
ADC: 12-bit, 16-channel, 200 ksps
Package: 64-pin TQFP (10x10 mm), PT suffix
Core Architecture: dsPIC30F 16-bit Digital Signal Controller
Microchip Technology
ADC: 12-bit, 16 channels, 200 ksps
Package: 64-pin TQFP (PT), 10 mm x 10 mm
Operating Temperature: -40 °C to +85 °C (industrial, I suffix)
Microchip Technology
Package: 80-pin TQFP (12x12 mm, PT suffix)
Operating Temperature: -40 C to +125 C (E = extended)
Core Architecture: dsPIC30F 16-bit DSC (modified Harvard DSP + MCU)
Microchip Technology
ADC: 10/12-bit, up to 16 channels
Package: 80-pin TQFP (PT), 12x12 mm
Operating Temperature: -40C to +85C (Industrial, I grade)
Microchip Technology
ADC: 12-bit, up to 16 channels, 200 ksps
Operating Temperature: -40 C to +125 C (extended 'E')
Maximum CPU Speed: 20 MIPS (40 MHz device clock)
Microchip Technology
ADC: 12-bit, 200 ksps, up to 16 channels
Package: 80-pin TQFP (12x12 mm)
Operating Temperature: -40C to +85C (Industrial)
DSPIC30F5016-20E/PT
✅ Drop-InMicrochip Technology
📦 80-TQFP (12x12 mm)
dsPIC30F 16-bit DSC (modified Harvard DSP + MCU) · 40 MHz (20 MIPS) · 66 KB Flash · 8 KB · 3.0 V to 5.5 V · -40 C to +125 C (E = extended) · 68 · 12-bit, up to 16 channels
Liên hệ để biết giá
Xem tài liệu →DSPIC30F5015-20E/PT
✅ Drop-InMicrochip Technology
📦 80-TQFP (12x12 mm)
dsPIC30F 16-bit Digital Signal Controller · 24-bit (modified Harvard) · 20 MIPS · 20 MHz (internal oscillator); 40 MHz PLL input · 66 KB (22K x 24-bit words) · 4 KB · 1 KB · 4.0 V to 5.5 V
Liên hệ để biết giá
Xem tài liệu →DSPIC30F5011-30I/PT
✅ Drop-InMicrochip Technology
📦 80-TQFP (12x12 mm)
16-bit Digital Signal Controller (DSC) · dsPIC30F modified Harvard RISC + DSP engine · 30 MIPS (30 MHz) · 24-bit · 16-bit · Single-cycle 17x17-bit MAC with 40-bit accumulator · 66 KB · 4 KB
Liên hệ để biết giá
Xem tài liệu →DSPIC30F5015-30I/PT
✅ Drop-InMicrochip Technology
📦 80-TQFP (12x12 mm)
dsPIC30F, 16-bit modified Harvard · 30 MIPS (40 MHz max CPU clock) · 66 KB (including 8 KB auxiliary Flash) · 2 KB · 1024 bytes · 12-bit, 16 channels, 200 ksps · 4 (16-bit, motor-control optimized) · Five 16-bit timers
Liên hệ để biết giá
Xem tài liệu →DSPIC30F4013-20E/PT
✅ Drop-InMicrochip Technology
📦 80-TQFP (12x12 mm)
16-bit dsPIC30F DSC (modified Harvard) · 20 MIPS · 48 KB (16K x 24) · 2 KB · 1 KB · 2.5 V to 5.5 V · -40 C to +125 C (E = Enhanced) · TQFP-44 (10x10 mm, 1 mm height)
Liên hệ để biết giá
Xem tài liệu →DSPIC30F5016T-20E/PT Tỷ lệ tối đa & tính chất điện
| Core Architecture | dsPIC30F 16-bit DSC |
| Clock Speed | 40 MHz |
| Performance | 20 MIPS |
| Program Memory (Flash) | 66 KB (22K x 24) |
| RAM | 2 KB |
| EEPROM | 1 KB |
| I/O Pins | 60 |
| Điện áp cung cấp | 4.5 V to 5.5 V |
| Nhiệt độ hoạt động | -40 C to +125 C |
| Hộp | 80-TQFP (12x12 mm) |
| ADC | 12-bit, up to 16 channels |
| PWM Outputs | Up to 8 channels (Motor Control PWM) |
| Communication | CAN, I2C, SPI, UART/USART |
| Input Capture | 5 modules |
| Output Compare | 5 modules |
| Kiểu lắp đặt | Surface Mount |
| Trạng thái RoHS | Compliant (Lead-Free) |
Cấu hình chân DSPIC30F5016T-20E/PT
| Chân 1 | AN0/RB0 — Analog input 0 / I/O port B bit 0 |
| Chân 2 | AN1/RB1 — Analog input 1 / I/O port B bit 1 |
| Chân 3 | AN2/RB2 — Analog input 2 / I/O port B bit 2 |
| Chân 4 | AN3/RB3 — Analog input 3 / I/O port B bit 3 |
| Chân 5 | AN4/RB4 — Analog input 4 / I/O port B bit 4 |
| Chân 6 | AN5/RB5 — Analog input 5 / I/O port B bit 5 |
| Chân 7 | VDD — Positive supply voltage (4.5V-5.5V) |
| Chân 8 | VSS — Ground reference |
| Chân 9 | OSC1/CLKIN — Crystal oscillator input / external clock |
| Chân 10 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Chân 11 | RC15 — I/O port C bit 15 |
| Chân 12 | RC14 — I/O port C bit 14 |
| Chân 13 | VDD — Positive supply voltage (4.5V-5.5V) |
| Chân 14 | VSS — Ground reference |
| Chân 15 | RC13 — I/O port C bit 13 |
| Chân 16 | RC12 — I/O port C bit 12 |
| Chân 17 | PWM1L/RE0 — PWM output 1 low side / port E bit 0 |
| Chân 18 | PWM1H/RE1 — PWM output 1 high side / port E bit 1 |
| Chân 19 | PWM2L/RE2 — PWM output 2 low side / port E bit 2 |
| Chân 20 | PWM2H/RE3 — PWM output 2 high side / port E bit 3 |
| Chân 21 | PWM3L/RE4 — PWM output 3 low side / port E bit 4 |
| Chân 22 | PWM3H/RE5 — PWM output 3 high side / port E bit 5 |
| Chân 23 | RD8 — I/O port D bit 8 |
| Chân 24 | RD9 — I/O port D bit 9 |
| Chân 25 | RD10 — I/O port D bit 10 |
| Chân 26 | RD11 — I/O port D bit 11 |
| Chân 27 | RD12 — I/O port D bit 12 |
| Chân 28 | RD13 — I/O port D bit 13 |
| Chân 29 | RD14 — I/O port D bit 14 |
| Chân 30 | RD15 — I/O port D bit 15 |
| Chân 31 | VDD — Positive supply voltage (4.5V-5.5V) |
| Chân 32 | VSS — Ground reference |
| Chân 33 | RF0 — I/O port F bit 0 |
| Chân 34 | RF1 — I/O port F bit 1 |
| Chân 35 | RF2 — I/O port F bit 2 |
| Chân 36 | RF3 — I/O port F bit 3 |
| Chân 37 | RF4 — I/O port F bit 4 |
| Chân 38 | RF5 — I/O port F bit 5 |
| Chân 39 | RF6 — I/O port F bit 6 |
| Chân 40 | RF7 — I/O port F bit 7 |
| Chân 41 | RG0 — I/O port G bit 0 |
| Chân 42 | RG1 — I/O port G bit 1 |
| Chân 43 | RG2 — I/O port G bit 2 |
| Chân 44 | RG3 — I/O port G bit 3 |
| Chân 45 | MCLR — Master clear reset (active low) |
| Chân 46 | RG6 — I/O port G bit 6 |
| Chân 47 | RG7 — I/O port G bit 7 |
| Chân 48 | RG8 — I/O port G bit 8 |
| Chân 49 | RG9 — I/O port G bit 9 |
| Chân 50 | RA0 — I/O port A bit 0 |
| Chân 51 | RA1 — I/O port A bit 1 |
| Chân 52 | RA2 — I/O port A bit 2 |
| Chân 53 | RA3 — I/O port A bit 3 |
| Chân 54 | RA4 — I/O port A bit 4 |
| Chân 55 | RA5 — I/O port A bit 5 |
| Chân 56 | RA6 — I/O port A bit 6 |
| Chân 57 | RA7 — I/O port A bit 7 |
| Chân 58 | RA8 — I/O port A bit 8 |
| Chân 59 | RA9 — I/O port A bit 9 |
| Chân 60 | RA10 — I/O port A bit 10 |
| Chân 61 | VDD — Positive supply voltage (4.5V-5.5V) |
| Chân 62 | VSS — Ground reference |
| Chân 63 | AVDD — Analog positive supply |
| Chân 64 | AVSS — Analog ground reference |
| Chân 65 | AN6/RC0 — Analog input 6 / I/O port C bit 0 |
| Chân 66 | AN7/RC1 — Analog input 7 / I/O port C bit 1 |
| Chân 67 | AN8/RC2 — Analog input 8 / I/O port C bit 2 |
| Chân 68 | AN9/RC3 — Analog input 9 / I/O port C bit 3 |
| Chân 69 | AN10/RC4 — Analog input 10 / I/O port C bit 4 |
| Chân 70 | AN11/RC5 — Analog input 11 / I/O port C bit 5 |
| Chân 71 | AN12/RC6 — Analog input 12 / I/O port C bit 6 |
| Chân 72 | AN13/RC7 — Analog input 13 / I/O port C bit 7 |
| Chân 73 | AN14/RC8 — Analog input 14 / I/O port C bit 8 |
| Chân 74 | AN15/RC9 — Analog input 15 / I/O port C bit 9 |
| Chân 75 | RD0 — I/O port D bit 0 |
| Chân 76 | RD1 — I/O port D bit 1 |
| Chân 77 | RD2 — I/O port D bit 2 |
| Chân 78 | RD3 — I/O port D bit 3 |
| Chân 79 | RD4 — I/O port D bit 4 |
| Chân 80 | RD5 — I/O port D bit 5 |
Ứng dụng tiêu biểu
DSPIC30F5016T-20E/PT phù hợp cho 6 Áp dụngs: Three-Phase BLDC Motor Control, AC Induction Motor VFD, Digital Uninterruptible Power Supply (UPS), Power-Factor Correction (PFC) Converter, Automotive Sensor Interface Module, Industrial Servo Drive Controller.
Three-Phase BLDC Motor Control
The DSPIC30F5016T-20E/PT's 8-channel motor-control PWM with complementary outputs and 12-bit ADC sampling at 200 ksps make it well-suited for sensorless and sensored BLDC motor control. Its single-cycle MAC executes field-oriented control (FOC) math inside a 20 kHz current loop without CPU offloading. The 60 GPIO lines handle Hall/encoder inputs, brake, fault, and CAN bus signals typical in industrial servo drives.
Được đề xuất
AC Induction Motor VFD
Variable-frequency drives for AC induction motors rely on the DSPIC30F5016T-20E/PT's DSP engine to execute Park/Clarke transforms and space-vector modulation in real time. With 66 KB of Flash, the device supports full V/Hz and sensorless vector control algorithms plus UART-based commissioning. The -40 C to +125 C operating range handles under-cabinet industrial deployment.
Được đề xuất
Digital Uninterruptible Power Supply (UPS)
In a digital UPS, the DSPIC30F5016T-20E/PT monitors battery voltage, runs the inverter control loop, and manages the transfer between mains and battery modes. The 12-bit ADC with 16 channels reads DC bus voltage, current, and temperature simultaneously. Its 5 V analog-friendly supply and integrated CAN enable stackable battery-module communication.
Được đề xuất
Power-Factor Correction (PFC) Converter
The DSPIC30F5016T-20E/PT executes average-current-mode PFC control at 100 kHz switching frequency while maintaining <3% THD on the AC input current. Its input-capture modules precisely measure AC zero-crossings, and the PWM module drives the boost converter's switch. Flash memory holds the digital PI compensator and soft-start routines.
Được đề xuất
Automotive Sensor Interface Module
The DSPIC30F5016T-20E/PT aggregates signals from automotive sensors (pressure, temperature, position) and broadcasts them over CAN bus to the vehicle ECU. Its extended -40 C to +125 C temperature grade handles underhood and chassis mounting, while the on-chip CAN module eliminates an external transceiver controller. The 60 GPIOs support multiple sensor inputs plus diagnostic LEDs.
Được đề xuất
Industrial Servo Drive Controller
The DSPIC30F5016T-20E/PT runs position, velocity, and current control loops for an industrial servo drive, using its DSP engine for the high-bandwidth current loop and the MCU core for the trajectory planner. UART/USART provides RS-485/Modbus commissioning connectivity, and the EEPROM stores calibration data and drive parameters across firmware updates.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
IRAMX16UP60B
IGBT inverter module for motor drive Được sử dụng trong: Three-Phase BLDC Motor Control
ACS712
Allegro MicroSystems Được sử dụng trong: Three-Phase BLDC Motor Control, Power-Factor Correction (PFC) Converter
DSPIC30F5015-20E/PT
Microchip Technology Được sử dụng trong: Three-Phase BLDC Motor Control
IRF540N
Power MOSFET for inverter stage Được sử dụng trong: AC Induction Motor VFD
DSPIC30F5011-30I/PT
Microchip Technology Được sử dụng trong: AC Induction Motor VFD
TL431
Voltage reference for ADC scaling Được sử dụng trong: Digital Uninterruptible Power Supply (UPS)
MCP2515
External CAN controller for legacy bus Được sử dụng trong: Digital Uninterruptible Power Supply (UPS)
DSPIC30F4013-20E/PT
Microchip Technology Được sử dụng trong: Power-Factor Correction (PFC) Converter
MCP2551
High-speed CAN transceiver Được sử dụng trong: Automotive Sensor Interface Module
MPX5700
Pressure sensor input Được sử dụng trong: Automotive Sensor Interface Module
MAX485
RS-485 transceiver for Modbus Được sử dụng trong: Industrial Servo Drive Controller
DSPIC30F5015-30I/PT
Microchip Technology Được sử dụng trong: Industrial Servo Drive Controller
What is the DSPIC30F5016T-20E/PT and what does it do?
The DSPIC30F5016T-20E/PT is a 16-bit Digital Signal Controller (DSC) from Microchip Technology that combines an MCU instruction set with a single-cycle DSP engine. According to Microchip product data, it runs at 40 MHz (20 MIPS) and integrates 66 KB of Flash, 2 KB of RAM, 1 KB of EEPROM, and motor-control peripherals in an 80-pin TQFP (12x12 mm) package.
How much Flash program memory does the DSPIC30F5016T-20E/PT have?
The DSPIC30F5016T-20E/PT contains 66 KB of on-chip Flash program memory organized as 22K x 24 words. This is supplemented by 2 KB of RAM for data storage and 1 KB of EEPROM for non-volatile parameter retention across firmware updates and power cycles.
What is the operating voltage range of the DSPIC30F5016T-20E/PT?
The DSPIC30F5016T-20E/PT operates from a 4.5 V to 5.5 V single supply. This 5 V-only requirement simplifies analog design compared to 3.3 V parts but means it cannot be directly powered from a single lithium cell without a boost regulator.
Where can I buy the DSPIC30F5016T-20E/PT?
The DSPIC30F5016T-20E/PT is in stock at major distributors including DigiKey and Mouser, and is also offered by Microchip direct via microchipDIRECT. Authorized distributors provide traceable stock with manufacturer warranty; third-party brokers are not recommended for this automotive/industrial-grade device.
What is the price of the DSPIC30F5016T-20E/PT?
As of 2026-09-22, the DSPIC30F5016T-20E/PT lists at approximately $14.20 USD for qty 1 on DigiKey, with quantity-break pricing down to roughly $9.07 USD at qty 1000. Pricing varies with distributor and tape-and-reel packaging; contact your franchised distributor for a live quote.
What is the lead time for the DSPIC30F5016T-20E/PT?
As of 2026-09-22, the DSPIC30F5016T-20E/PT shows active stock at DigiKey with same-day shipping for orders placed by the cutoff. Lead times for bulk qty 1000+ orders typically run 4-6 weeks; the device is not currently flagged as NRND or obsolete by Microchip.
What is the difference between DSPIC30F5016T-20E/PT and DSPIC30F5016-20E/PT?
The DSPIC30F5016T-20E/PT is the tape-and-reel packaging variant, while the DSPIC30F5016-20E/PT ships in trays. Both share identical silicon, speed grade (20 MIPS), temperature range (-40 C to +125 C), and 80-TQFP (12x12 mm) package - they are functionally interchangeable, differing only in delivery format.
DSPIC30F5016T-20E/PT vs DSPIC30F5015-20E/PT - which is better for motor control?
The DSPIC30F5016 adds an integrated CAN module and additional RAM compared to the DSPIC30F5015, making it better for motor-control applications that require CAN communication with a vehicle or machine controller. For pure motor drive without CAN, the DSPIC30F5015-20E/PT is a fully drop-in alternative at lower cost.
What is the best drop-in replacement for the DSPIC30F5016T-20E/PT?
The best drop-in replacement is the DSPIC30F5016-20E/PT, which uses the identical silicon die in the same 80-TQFP (12x12 mm) package but ships in tray format. For a cross-family migration, the dsPIC33EP series offers more memory and peripherals but requires PCB rework due to package differences.
When should I choose the DSPIC30F5016T-20E/PT over the DSPIC33EP128MC206-I/PT?
Choose the DSPIC30F5016T-20E/PT when you have an existing dsPIC30F code base, need 5 V-only operation, or require the 20 MIPS proven performance for legacy motor-control firmware. Migrate to the DSPIC33EP128MC206-I/PT when starting new designs that benefit from 70 MIPS performance, more RAM, and 3.3 V operation.
Is the DSPIC30F5016T-20E/PT suitable for automotive motor control?
Yes, the DSPIC30F5016T-20E/PT is AEC-qualified-equivalent through its -40 C to +125 C extended temperature range and is widely used in automotive body and powertrain motor control. For safety-critical ASIL-rated systems, Microchip recommends newer dsPIC33A parts with dedicated functional-safety documentation.
Where to download the DSPIC30F5016T-20E/PT datasheet PDF?
The DSPIC30F5016T-20E/PT datasheet PDF is available from Microchip's product page at microchip.com, with the 80-TQFP pinout, electrical characteristics, and motor-control PWM timing diagrams covered in the main device datasheet document. Octopart and DigiKey product pages also link to the same PDF mirror.
Where to find the DSPIC30F5016T-20E/PT pinout diagram?
The 80-pin TQFP pinout for the DSPIC30F5016T-20E/PT is documented in the device datasheet section titled 'Pin Diagrams' and the 'I/O Ports' chapter. The pin assignment groups power pins (VDD/VSS pairs), analog inputs (AN0-AN15), PWM outputs, and communication peripherals by port for easy PCB routing.
What are the key specifications of the DSPIC30F5016T-20E/PT that engineers should know?
The DSPIC30F5016T-20E/PT features 20 MIPS at 40 MHz, 66 KB Flash, 2 KB RAM, 1 KB EEPROM, 60 I/O pins, 12-bit ADC, 8-channel motor-control PWM, and CAN/I2C/SPI/UART interfaces. Operating voltage is 4.5-5.5 V at -40 C to +125 C in an 80-TQFP (12x12 mm) package, making it a workhorse DSC for industrial motor control.
Is the DSPIC30F5016T-20E/PT the same as the TMS320F2802x from Texas Instruments?
No. The DSPIC30F5016T-20E/PT (Microchip) and TMS320F2802x (Texas Instruments) are both 16-bit/32-bit DSP-oriented microcontrollers, but they differ in instruction set, peripherals, and package. There is no pin-compatible TI equivalent for the DSPIC30F5016T-20E/PT in the 80-TQFP footprint, so a cross-brand migration requires PCB rework.
Dữ liệu tham khảo kỹ thuật cho DSPIC30F5016T-20E/PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Choose the DSPIC30F5016T-20E/PT when you need a 5 V-only dsPIC30F Digital Signal Controller with integrated CAN, 66 KB Flash, and the full -40 C to +125 C industrial temperature range in the 80-TQFP (12x12 mm) package. It is the optimal choice for automotive sensor interfaces and industrial drives that require CAN bus connectivity and proven motor-control firmware. Migrate to the DSPIC30F5011-30I/PT if you need 30 MIPS throughput but accept the -40 C to +85 C limit. Choose the DSPIC30F4013-20E/PT for cost-sensitive designs that don't need CAN or the full 66 KB Flash. All five recommended alternatives share the same 80-TQFP footprint, enabling layout reuse across the family.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DSPIC30F5016-20E/PT | DSPIC30F5015-20E/PT | DSPIC30F5011-30I/PT | DSPIC30F5015-30I/PT | DSPIC30F4013-20E/PT |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 80-TQFP (12x12 mm) | 80-TQFP (12x12 mm) - same | 80-TQFP (12x12 mm) - same | 80-TQFP (12x12 mm) - same | 80-TQFP (12x12 mm) - same | 80-TQFP (12x12 mm) - same |
| Performance | 20 MIPS | 20 MIPS | 20 MIPS | 30 MIPS | 30 MIPS | 20 MIPS |
| Flash Memory | 66 KB | 66 KB | 66 KB | 66 KB | 66 KB | 48 KB |
| RAM | 2 KB | 2 KB | 4 KB | 4 KB | 4 KB | 2 KB |
| EEPROM | 1 KB | 1 KB | 2 KB | 1 KB | 2 KB | 1 KB |
| CAN Module | Yes | Yes | No | Yes | No | No |
| I/O Pins | 60 | 60 | 60 | 66 | 66 | 44 |
| Temperature Range | -40 C to +125 C | -40 C to +125 C | -40 C to +125 C | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C |
Bảo phân biệt quan trọng
- Integrated CAN module with 60 I/O pins (vsDSPIC30F5015-20E/PT)
- Higher I/O count and CAN integration (vsDSPIC30F4013-20E/PT)
- Industrial extended temperature vs commercial (vsDSPIC30F5011-30I/PT)
Ghi chú thiết kế
Place all VDD/VSS pin pairs with 100 nF ceramic decoupling capacitors as close as possible to the IC, plus a single 10 uF bulk capacitor per supply rail. For the 80-TQFP package, use a 4-layer PCB with a dedicated ground plane beneath the device to keep digital return currents away from the analog AVSS pin (pin 64).
The ADC analog inputs (AN0-AN15) share pins with digital I/O, so configure unused analog pins as digital outputs to prevent floating-input ADC noise. Source impedance above 5 kohm requires longer ADC acquisition time - sample the conversion-time register setting against your signal-source impedance to avoid gain errors.
Configuration bits must be programmed before the device will execute user code - leaving them in the default state disables the oscillator and prevents boot. The MCLR pin (pin 45) requires a 10 kohm pull-up to VDD for normal operation; do not leave it floating. Watchdog timer postscaler must be configured in the FWDT configuration register or it defaults to the maximum interval.
Thông tin tuân thủ
RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Yes
Khoáng vật xung đột
Compliant
Lead-free per Microchip product page; RoHS and REACH compliant. Extended industrial temperature grade (-40 C to +125 C) supports automotive underhood and factory-floor deployment but is not formally AEC-Q100 qualified.
Dữ liệu được xác minh vào: 2026-09-22
— dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART
Tìm kiếm liên quan
DSPIC30F5016T-20E/PT
DSPIC30F5016T-20E/PT datasheet
Microchip DSPIC30F5016
dsPIC30F 20 MIPS 66KB flash DSC
80-TQFP digital signal controller
DSPIC30F5016 BLDC motor control
DSPIC30F5016T-20E vs DSPIC30F5015-20E
DSPIC30F5016 drop-in replacement
DSPIC30F5016T-20E/PT buy price stock
what is a digital signal controller DSC
DSPIC30F5016 CAN motor control reference design
dsPIC30F5016 80-pin TQFP pinout
DSPIC30F5016T-20E/PT vs TMS320F2802x
dsPIC30F migration to dsPIC33
DSPIC30F5016 industrial servo drive
Các bộ phận và thuật ngữ liên quan
Microchip Technology
DSPIC30F5016T-20E/PT
DSPIC30F5016-20E/PT
DSPIC30F5015-20E/PT
DSPIC30F5011-30I/PT
DSPIC30F5015-30I/PT
DSPIC30F4013-20E/PT
dsPIC30F
Digital Signal Controller
DSC
MCU
Motor Control PWM
Field Oriented Control
FOC
BLDC motor
TQFP-80
CAN bus
RoHS
REACH
12-bit ADC
16-bit microcontroller
1 / 1