DSPIC33CK128MC102T-I/2N - 100MHz 128KB Flash DSC | Microchip
MPN: DSPIC33CK128MC102T-I/2N ✓ Hoạt độngDSPIC33CK128MC102T-I/2N Tóm tắt
A Digital Signal Controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and full DSPs, making the dsPIC33CK family a common choice in the microcontroller -> DSC -> DSP spectrum for real-time control loops.
Key features include the 100 MHz dsPIC33CK core with DSP engine and barrel shifter, 128 KB Flash and 16 KB RAM, on-chip operational amplifiers (OpAmps), a 12-bit ADC, and high-resolution PWM peripherals - the exact combination cited by Mouser: "dsPIC33C 100MHz, 128KB Flash, 16KB RAM, OpAmps, 12bit ADC, PWM". Four DMA channels enable efficient data movement without CPU intervention.
The dsPIC33CK architecture builds on Microchip's 16-bit dsPIC33 heritage, adding a faster core, improved ADC throughput, and current-sensing op-amps aimed at field-oriented control (FOC). The single-core design simplifies software compared to the dual-core dsPIC33CH family while retaining DSP multiply-accumulate performance for control mathematics.
Typical applications include high-speed motor control (BLDC/PMSM FOC), digital power conversion (totem-pole PFC, LLC), and audio/signal processing, as identified in distributor listings by Lisleapex and Microchip.
Design consideration: verify the pin mapping for the 28-UQFN (2N) package directly in the Microchip datasheet before layout, as pin functions are multiplexed across the small 28-pin count.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho DSPIC33CK128MC102T-I/2N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DSPIC33CK128MC102T-I/2N (cùng hình factor và footprint) — khác nhau ở Operating Temperature, Package, Program Memory Size, RAM Size.
DSPIC33CK128MC102T-E/2N
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC33CK64MC102T-I/2N
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC33CK256MC102T-I/2N
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC33CK32MC102T-I/2N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →DSPIC33CK128MC102-I/SS
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DSPIC33CK128MC102T-I/2N Tỷ lệ tối đa & tính chất điện
| Core Processor | dsPIC33CK 16-bit DSC core |
| Core Size | 16-bit |
| Tần số xung maksimum | 100 MHz |
| Program Memory Size | 128 KB (128K x 8) Flash |
| RAM Size | 16 KB |
| ADC Resolution | 12-bit |
| On-Chip OpAmps | Yes (integrated operational amplifiers) |
| PWM Peripherals | Yes (high-resolution PWM) |
| DMA Channels | 4 |
| DSP Features | DSP engine, barrel shifter |
| Nhiệt độ hoạt động | -40C to +85C (I grade) |
| Hộp | 28-UQFN (6x6x0.55 mm) |
| Kiểu lắp đặt | Surface Mount |
| Packaging | Tape & Reel (T) |
| Trạng thái RoHS | Compliant (per Newark listing: ROHS COMPLIANT: YES) |
| Low-Power Modes | Yes |
Hướng dẫn cấu hình chân DSPIC33CK128MC102T-I/2N 28-uqfn (6x6x0.55 mm)
Cấu hình chân cho DSPIC33CK128MC102T-I/2N (28-uqfn (6x6x0.55 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho DSPIC33CK128MC102T-I/2N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DSPIC33CK128MC102T-I/2N phù hợp cho 6 Áp dụngs: Brushless Motor Control (FOC), Digital Power Conversion, Audio and Signal Processing, Industrial Automation and Sensing, Consumer Appliances, Battery-Powered and Portable Equipment.
Brushless Motor Control (FOC)
The DSPIC33CK128MC102T-I/2N fits field-oriented control (FOC) of BLDC and PMSM motors because its 100 MHz core executes Clarke/Park transforms and PI current loops with DSP multiply-accumulate instructions at PWM frequencies well into the tens of kHz. The on-chip operational amplifiers amplify low-level shunt-resistor current signals before the 12-bit ADC samples them, and four DMA channels move ADC results without CPU intervention, keeping loop jitter minimal. The high-resolution PWM generates complementary outputs with dead-time insertion for three-phase inverters, and 128 KB Flash accommodates sensorless observers such as sliding-mode or flux estimators with headroom to spare.
Được đề xuất
Digital Power Conversion
For digital power supplies such as totem-pole PFC, LLC, and buck/boost stages, the DSPIC33CK128MC102T-I/2N provides the combination of a 100 MHz control core and high-resolution PWM needed for tight regulation at switching frequencies where conventional MCUs cannot close the loop fast enough. The 12-bit ADC with DMA-driven sampling captures input/output voltage and inductor current synchronously with the PWM period, while the DSP engine executes the compensator arithmetic deterministically. The integrated op-amps condition current-shunt feedback on-chip, reducing BOM count, and 128 KB Flash leaves room for multiple converter profiles plus communication firmware in a single device.
Được đề xuất
Audio and Signal Processing
Distributor listings for the DSPIC33CK128MC102T-I/2N identify audio processing as a target use case. The 100 MHz DSP core performs FIR/IIR filtering, sample-rate conversion, and effects algorithms efficiently using hardware multiply-accumulate, while 16 KB RAM provides working buffers for frame-based audio at standard sample rates. The 12-bit ADC can digitize line-level inputs through the integrated op-amps, and the high-resolution PWM with DMA can serve as a basic output stage in cost-sensitive audio products. 128 KB Flash accommodates a complete signal-chain firmware including communication and housekeeping code.
Được đề xuất
Industrial Automation and Sensing
In industrial nodes, the DSPIC33CK128MC102T-I/2N combines deterministic control with the -40C to +85C industrial temperature rating demanded by factory environments. Its DSP throughput supports vibration-analysis and condition-monitoring preprocessing at the edge, while the 12-bit ADC and integrated op-amps digitize 4-20 mA and sensor signals. Four DMA channels keep communication servicing off the control loop, and low-power modes suit battery-backed monitoring units. The 28-UQFN 6x6 mm package conserves PCB area in compact I/O modules, and 128 KB Flash provides space for protocol stacks and field-updatable application code.
Được đề xuất
Consumer Appliances
Appliance subsystems - fan motors, pumps, compressors, and heaters - benefit from the DSPIC33CK128MC102T-I/2N's single-chip integration of motor control and system supervision. The 100 MHz core closes sensorless FOC loops efficiently, the integrated op-amps and 12-bit ADC handle current and temperature feedback without external analog ICs, and the high-resolution PWM drives inverter stages with precise dead-time control for acoustic-noise reduction. RoHS-compliant, lead-free 28-UQFN packaging supports high-volume automated assembly, and 128 KB Flash lets one PCB platform serve multiple appliance SKUs through firmware variants.
Được đề xuất
Battery-Powered and Portable Equipment
The DSPIC33CK128MC102T-I/2N suits portable, battery-operated control applications through its low-power modes that cut consumption between control events while the 100 MHz core still delivers bursts of DSP performance when the power stage needs it. The integrated op-amps and 12-bit ADC measure battery current and pack voltage for fuel gauging and protection, and the high-resolution PWM drives charging or motor stages from the same die. The small 28-UQFN 6x6x0.55 mm footprint keeps end-product PCBs compact, and 128 KB Flash supports sophisticated power-management state machines alongside the primary control firmware.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DSPIC33CK128MC102T-I/2N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DSPIC33CK128MC102T-E/2N | DSPIC33CK64MC102T-I/2N | DSPIC33CK256MC102T-I/2N |
|---|---|---|---|---|
| Package | 28-UQFN (6x6x0.55 mm) | 28-UQFN (6x6x0.55 mm) - same | 28-UQFN (6x6x0.55 mm) - same | 28-UQFN (6x6x0.55 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Max Clock | dsPIC33CK 16-bit, 100 MHz | dsPIC33CK 16-bit, 100 MHz | dsPIC33CK 16-bit, 100 MHz | dsPIC33CK 16-bit, 100 MHz |
| Flash Program Memory | 128 KB | 128 KB | 64 KB | 256 KB |
| RAM | 16 KB | 16 KB | 16 KB | 16 KB |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (E grade) | -40C to +85C (I grade) | -40C to +85C (I grade) |
| On-Chip OpAmps / 12-bit ADC / PWM | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes |
| Relative Cost Position | Mid (128 KB) | Premium (extended temp grade) | Lower (half the Flash) | Higher (double the Flash) |
Bảo phân biệt quan trọng
- Balanced 128 KB Flash with 16 KB RAM (vsDSPIC33CK64MC102T-I/2N)
- Cost efficiency over larger Flash variant (vsDSPIC33CK256MC102T-I/2N)
- Industrial temperature grade cost advantage (vsDSPIC33CK128MC102T-E/2N)
Ghi chú thiết kế
The 28-UQFN (6x6x0.55 mm) package has a 0.4-0.5 mm pitch land pattern with a central exposed thermal pad that should be soldered to a grounded copper pour for both heat dissipation and grounding of analog circuits. Use a standard QFN stencil with approximately 50% coverage on the center pad to avoid solder voids. Because the /2N package is lead-frame based with perimeter pins only, verify the exact pin functions against the dsPIC33CK128MC102 family datasheet pin diagram before routing - analog inputs, op-amp pins, and PWM outputs are multiplexed on this reduced pin count.
Decouple the VDD core and I/O supply rails with 0.1 uF ceramic capacitors placed within 2 mm of each supply pin, plus a 4.7-10 uF bulk capacitor per rail. The dsPIC33CK core at 100 MHz draws transient current on every clock edge; a shared, poorly decoupled rail between the core regulator output and analog op-amp supplies will degrade ADC accuracy. When using the on-chip op-amps for current sensing, route the shunt signal to the amplifier inputs as a Kelvin connection and keep the amplifier output trace short to the ADC input pin.
Two frequent mistakes with the dsPIC33CK family: (1) MCLR must be pulled up (typically 10 kohm) and kept below the absolute maximum rating; leaving it floating causes sporadic resets. (2) The 100 MHz core clock is derived from an internal PLL - configure the PLL divider ratios within the datasheet's allowed input frequency window, and confirm startup behavior before committing oscillator settings in firmware. Also note the /I grade is rated to +85C: for enclosed drives that exceed this ambient, substitute the pin-compatible /E grade (-40C to +125C) instead of derating the design.
Thông tin tuân thủ
Newark product listing explicitly states "ROHS COMPLIANT: YES". REACH, halogen-free, and conflict-minerals declarations not stated in provided data - request official compliance documents from Microchip.
