Altera

EP4CE10E22C8LN - 10,320-LC Cyclone IV E FPGA | Altera

MPN: EP4CE10E22C8LN ✓ Hoạt động
1.2 V Vdss 144-LQFP exposed pad Package
MOQ: 1 |

EP4CE10E22C8LN Tóm tắt

The Altera EP4CE10E22C8LN is a Cyclone IV E field-programmable gate array with 10,320 logic cells, 91 I/Os and a 1.2 V supply in a 144-LQFP exposed-pad package. It combines programmable logic, fixed I/O resources and configuration capabilities for embedded control, signal processing and communication designs using a 60 nm FPGA process.

A field-programmable gate array is a semiconductor device whose digital logic and interconnect can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy and provides a configurable alternative to fixed application-specific integrated circuits. Its internal logic blocks and programmable routing allow one physical device to implement multiple control, interface, arithmetic and protocol functions, while dedicated I/O blocks support connections to external circuits.

The EP4CE10E22C8LN provides 10,320 logic cells and 91 I/Os in an E22 package variant identified as a 144-LQFP with exposed pad. Its 1.2 V core supply, 60 nm process and 144-lead surface-mount package make it suitable for compact embedded systems where moderate programmable-logic capacity and a moderate pin count are sufficient. The exposed thermal pad provides a central thermal and electrical land-pattern feature that must be handled according to the package drawing.

This ordering part number belongs to the Cyclone IV E family and the EP4CE10 device group. The C8 and LN ordering fields identify a specific configuration and qualification variant, so designers should not assume that a part with a similar speed or temperature code has identical operating limits. Configuration files, pin assignments, bank restrictions, supported supply rails and timing constraints must be checked for the exact ordering code before release to manufacturing.

Typical uses include industrial control logic, network-interface control, data acquisition, general-purpose embedded processing and communication equipment. In each case, the device can consolidate parallel control logic, interface adaptation and state-machine functions into one programmable component. Designs must provide the correct power rails, configuration interface, decoupling and clocking, and must observe the device-specific pin and I/O-bank constraints.

A critical implementation issue is exposed-pad PCB design. Connect the thermal pad to the appropriate ground plane with the manufacturer-recommended via pattern, keep high-current paths away from sensitive inputs and follow the package outline and land-pattern dimensions exactly. Validate signal integrity, power sequencing and configuration behavior before production.

This page combines manufacturer specifications, package details and application-oriented engineering guidance with a practical comparison of same-footprint family options. It also highlights ordering-code differences that can affect temperature qualification, speed grade or device resources, helping engineers distinguish a true PCB-level substitution from a redesign.

Bộ thay thế dễ dàng lắp đặt cho EP4CE10E22C8LN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP4CE10E22C8LN (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Logic Elements, User I/O Count, Device Variant.

Altera
Device Type: Field Programmable Gate Array (FPGA)
Logic Elements: 10,320
Device Variant: EP4CE10 (E22)
So sánh với EP4CE10E22C8LN →
Altera
Package: 144-LQFP exposed-pad package
Device Type: Field-Programmable Gate Array (FPGA)
Logic Elements: 10,320 logic elements
So sánh với EP4CE10E22C8LN →
Intel
Device Type: Cyclone IV E field-programmable gate array (FPGA)
Logic Elements: 10,320 cells
So sánh với EP4CE10E22C8LN →
Intel
Package: 144-LQFP Exposed Pad (E22)
So sánh với EP4CE10E22C8LN →
Intel
Package: 144-pin EQFP with exposed pad
Logic Elements: 10,320
User I/O Count: 91
So sánh với EP4CE10E22C8LN →
Altera
Package: 144-pin LQFP exposed-pad package
Device Type: Cyclone IV E Field Programmable Gate Array (FPGA)
Logic Elements: 10,320 cells
So sánh với EP4CE10E22C8LN →
Altera
Device Type: Cyclone IV E field-programmable gate array (FPGA)
Logic Elements: 22,320 logic elements
So sánh với EP4CE10E22C8LN →

EP4CE10E22C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh
Intel
📦 144-LQFP Exposed Pad
Cyclone IV E · EP4CE10 · 10,320 · 46 · 414 Kbit · 91 · 144 · 144-LQFP Exposed Pad (E22)

✗ Hết hàng

$11.1 / Đơn vị

Xem tài liệu →

EP4CE10E22C7N

✅ Drop-In ⚠️ Thông số chưa được xác minh
Altera
📦 144-LQFP Exposed Pad
Field-Programmable Gate Array (FPGA) · Cyclone IV E · 10,320 logic elements · 423,936 bits · 91 I/O · 144-LQFP exposed-pad package · 144 pins · 60 nm

Liên hệ để biết giá

Xem tài liệu →

EP4CE10E22C6N

✅ Drop-In ⚠️ Thông số chưa được xác minh
Altera
📦 144-LQFP Exposed Pad
Field Programmable Gate Array (FPGA) · Cyclone IV E · EP4CE10 (E22) · 10,320 · 91 · 1.2 V · 144-LQFP Exposed Pad · HLFQFP

Liên hệ để biết giá

Xem tài liệu →

EP4CE10E22I7N

✅ Drop-In ⚠️ Thông số chưa được xác minh
Altera
📦 144-LQFP Exposed Pad
Cyclone IV E Field Programmable Gate Array (FPGA) · 10,320 cells · 423,936 bits · 1.2 V · 91 I/O · 144-pin LQFP exposed-pad package · Surface mount · EP4CE10 E22

Liên hệ để biết giá

Xem tài liệu →

EP4CE10F23C8N

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 144-LQFP Exposed Pad
Same E22 package class and C8 speed code, while the F23 device group provides a larger resource configuration than the E22 device group.

📋 Tham chiếu thay thế (không có trong danh mục)

EP4CE10E22C8LN Tỷ lệ tối đa & tính chất điện

Device Type Cyclone IV E field-programmable gate array
Logic Cells 10,320 cells
User I/O Count 91 I/Os
Process Technology 60 nm
Core Supply Voltage 1.2 V
Hộp 144-LQFP exposed pad
Total Package Pins 144 pins
Kiểu lắp đặt Surface mount
Device Variant EP4CE10 E22
Ordering Code C8LN configuration and qualification suffix
Trạng thái RoHS unknown
REACH Status unknown

Hướng dẫn cấu hình chân EP4CE10E22C8LN 144 pins

Cấu hình chân cho EP4CE10E22C8LN (144 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 144 pins cho EP4CE10E22C8LN

Không có dữ liệu chân cụ thể sẵn có cho EP4CE10E22C8LN.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

EP4CE10E22C8LN phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Network Interface Control, Data Acquisition and Signal Conditioning, Communication Equipment Control, Embedded Instrumentation, Programmable Logic Consolidation.

🏭

Industrial Control and Automation

The EP4CE10E22C8LN fits industrial control logic where programmable sequencing, interface handling and compact integration are important. Its 10,320 logic cells provide capacity for control state machines, counters, alarms and communication logic, while 91 I/Os support connections to sensors, actuators and field-bus transceivers. The 1.2 V core supply and 144-LQFP exposed-pad package support compact control-board construction. Designers should reserve resources for margin and implement industrial temperature, isolation and EMC requirements at the board level. The exposed pad must be tied and stitched to ground according to the package drawing, and timing-sensitive paths should be checked against the selected C8 speed grade before schematic release.

🌐

Network Interface Control

The EP4CE10E22C8LN can implement packet control, protocol state machines and data-routing functions in equipment that bridges external communication interfaces. Its 10,320 programmable logic cells allow parallel datapath and control sections to be consolidated, and its 91 I/Os can connect logic to transceivers or companion interface devices. The 144-LQFP exposed-pad footprint is useful where a moderate pin count and no exposed BGA routing are required. For networking applications, establish the clocking topology, I/O standards and timing constraints before placement. Keep high-speed routing away from the thermal-pad supply structure, follow the device pin-information document for bank assignments and validate receive and transmit margins before production.

📊

Data Acquisition and Signal Conditioning

The EP4CE10E22C8LN is suitable for control portions of data-acquisition systems that require deterministic digital logic close to external converters. The programmable fabric can implement acquisition sequencing, sample counters, digital filtering, trigger logic and data packing, while 91 I/Os provide interfaces to ADC, DAC and communication devices. Its 1.2 V core operation is consistent with compact mixed-signal control assemblies, although analog accuracy is determined by the external signal chain rather than the FPGA. Use the exact E22 pin table to establish I/O standards and supported banks. Confirm converter interface timing against the C8 device constraints and keep sensitive analog and high-impedance nodes physically separated from digital switching activity.

📡

Communication Equipment Control

The EP4CE10E22C8LN can consolidate framing, channel control, status monitoring and backplane-interface logic in communication equipment. Its 10,320 logic cells support moderate protocol engines and control functions without requiring the resources of a larger Cyclone IV E device, while the 91 I/Os permit direct connection to transceivers and parallel buses. The 144-LQFP exposed-pad package is practical for boards requiring a conventional leaded FPGA footprint. Designers should define clock domains carefully, constrain all asynchronous interfaces, and verify I/O voltage standards against bank restrictions. The exposed thermal pad and ground-via pattern should be designed together with return paths for high-speed signals to minimize noise coupling.

🔧

Embedded Instrumentation

The EP4CE10E22C8LN suits embedded instrumentation requiring programmable measurement control, calibration sequencing and a compact command interface. Logic capacity can support digital filtering, calibration tables, instrument state management and local bus handling, while the 91 I/Os connect controls, displays and converters. The 1.2 V core and exposed-pad LQFP package make thermal and layout planning explicit parts of the design. Use separate clocking and grounding strategies for analog, digital and power sections, and avoid routing sensitive measurement nodes beneath or immediately beside the FPGA. Check configuration start-up behavior, I/O standards and operating-temperature requirements against the exact ordering variant before releasing the instrument design for production.

🧩

Programmable Logic Consolidation

The EP4CE10E22C8LN can replace several small programmable-logic devices when their functions can be combined in one Cyclone IV E device. With 10,320 logic cells and 91 I/Os, it offers room for multiple control domains, interface bridges and fixed-function logic while retaining a single configuration file and package. This consolidation can simplify a 144-LQFP board layout, but it also concentrates power, clock and pin-routing constraints in one device. Partition functions into clear clock domains, reserve routing and logic margin and verify configuration compatibility before replacing existing CPLD or small-FPGA sections. The exposed pad must be connected using the prescribed via field, with thermal performance validated at maximum ambient temperature.

What is the EP4CE10E22C8LN?
The EP4CE10E22C8LN is an Altera Cyclone IV E FPGA with 10,320 logic cells, 91 I/Os and a 1.2 V core supply in a 144-LQFP exposed-pad package. According to the Altera EP4CE10 E22 product page, the device is an ordering part number within the Cyclone IV E FPGA family. It is intended for embedded control, interface and programmable-logic systems requiring moderate logic density.
How many logic cells and I/Os does the EP4CE10E22C8LN have?
The EP4CE10E22C8LN contains 10,320 logic cells and provides 91 user I/Os. These figures are listed for the exact ordering part number by the Altera product page and are also identified in distributor catalog data. Engineers sizing a design should compare the required logic, routing, memory and I/O utilization against the complete device capacity rather than treating the 91 I/Os as the only available resources.
What package does the EP4CE10E22C8LN use?
The EP4CE10E22C8LN is supplied in a 144-LQFP exposed-pad package. The Altera ordering information identifies the E22 package configuration, while distributor data describes the package as 144-LQFP with exposed pad. Because the exposed pad is part of the thermal and land-pattern design, the PCB footprint and pad-via arrangement must follow the exact package drawing.
What is the core supply voltage of the EP4CE10E22C8LN?
The EP4CE10E22C8LN operates from a 1.2 V core supply. The 1.2 V figure is identified in the device specifications and ordering-part-number listings. Complete power-supply design must additionally follow the manufacturer’s recommended voltage ranges, tolerances, sequencing and decoupling requirements rather than assuming that 1.2 V alone defines every rail condition.
Where can I download the EP4CE10E22C8LN datasheet?
The official EP4CE10E22C8LN product page provides access to detailed electrical, packaging and performance information for this ordering code. Use the Altera page for the authoritative ordering information and linked Cyclone IV E documentation. The EP4CE10 family datasheet and the pin-information document should be used together because a family document may contain variants with different package pins and qualification codes.
Where can I find the EP4CE10E22C8LN pinout?
The EP4CE10E22C8LN pinout is defined by the Cyclone IV E E22-package pin information and must be read together with the family datasheet. The EP4CE22 pin-information result confirms that Intel publishes package-specific pin tables, but pin names and bank assignments must not be transferred between speed, temperature or device-capacity variants without checking the exact table. Use the EP4CE10 E22 table when assigning PCB nets and configuration pins.
Is the EP4CE10E22C8LN suitable for industrial control systems?
The EP4CE10E22C8LN can be evaluated for industrial control systems because it provides 10,320 logic cells, 91 I/Os and a 144-LQFP exposed-pad package in the Cyclone IV E family. Qualification depends on the exact LN ordering interpretation, supported temperature range and application requirements. Confirm operating-temperature limits, reliability expectations and available lifecycle status against the manufacturer’s documentation before deploying it in a safety- or mission-critical system.
Can the EP4CE10E22C8LN replace the EP4CE10E22C8N?
The EP4CE10E22C8LN and EP4CE10E22C8N share the EP4CE10 E22 device and 144-LQFP exposed-pad package, making the C8N part a candidate PCB-level replacement. The additional LN ordering field must be reviewed because it can distinguish qualification or temperature characteristics. Before substitution, verify the required temperature grade, supply limits, configuration compatibility and the manufacturer’s pin and ordering-code guidance.
What is the best drop-in replacement for the EP4CE10E22C8LN?
The closest drop-in choices are same-package EP4CE10 E22 ordering variants with the C8 speed code and the required qualification suffix, including EP4CE10E22C8N. A valid replacement must match the 144-LQFP exposed-pad land pattern and preserve every required pin function. Because the programming model, configuration data and qualification requirements remain device-specific, confirm the exact ordering code with Altera before treating any variant as an approved substitution.
When should I choose the EP4CE10E22C8LN over a lower-capacity FPGA?
Choose the EP4CE10E22C8LN when the design needs more than the resources of a smaller EP4CE6-class device while remaining within the capacity and pin budget of the 10,320-logic-cell EP4CE10. Its 91 I/Os may also reduce the need for external I/O expansion. Select a smaller device only after Quartus utilization reports confirm that logic, memory, routing and timing requirements fit with appropriate margin.
Is the EP4CE10E22C8LN the same as the EP4CE22E22C8N?
No. The EP4CE10E22C8LN and EP4CE22E22C8N belong to the same Cyclone IV E family and use a related E22 package, but they represent different device capacities. Comparison data identifies 10,320 logic elements for the EP4CE10 and 22,320 for the EP4CE22. The larger EP4CE22 may fit a design with higher resource requirements, while the EP4CE10 is appropriate only when its capacity and timing margins are sufficient.
EP4CE10E22C8LN vs EP4CE10E22C7N: which speed grade should be selected?
The EP4CE10E22C8LN uses the C8 ordering code, while the EP4CE10E22C7N uses C7. Both are associated with the EP4CE10 E22 family and the same physical package class, but the C8 selection is the higher-code speed choice. Choose C8 when timing closure requires it and choose C7 only when the lower-code device meets the system timing budget and is approved for the target operating conditions.
How much power does the EP4CE10E22C8LN dissipate?
Power dissipation for the EP4CE10E22C8LN depends on supply voltage, configuration, logic activity, I/O loading, switching frequency and ambient temperature. The 1.2 V core value alone is not enough to calculate dissipation. Use the manufacturer’s power-estimation methodology with the actual design utilization and I/O activity, then verify temperature rise at the exposed thermal pad under worst-case operating conditions.
Where can I buy the EP4CE10E22C8LN and check its lead time?
Use the Request a Quote form on this page to request the EP4CE10E22C8LN, current stock position, lead time and requested quantity. The form allows procurement teams to confirm the exact 144-LQFP exposed-pad ordering code without relying on an ambiguous family listing. Include the required production quantity, delivery target and any traceability requirements in the request.
What is the price of the EP4CE10E22C8LN?
The current unit price and volume availability for the EP4CE10E22C8LN should be obtained through the Request a Quote form on this page. The form is the appropriate channel for an exact-MPN quotation because configuration codes, package form, order quantity and production requirements can affect commercial terms. Provide the required quantity and target delivery date to receive a current response.
Is the EP4CE10E22C8LN in stock?
Current stock status for the EP4CE10E22C8LN should be confirmed through the Request a Quote form on this page. Include the exact MPN, required quantity, date code requirements and shipment destination. A stock confirmation tied to those parameters is more useful for production planning than a generic availability indication for the broader Cyclone IV E family.
What key specifications should engineers check for the EP4CE10E22C8LN?
Engineers should check the 10,320 logic cells, 91 I/Os, 1.2 V core supply, 60 nm process technology and 144-LQFP exposed-pad package for the EP4CE10E22C8LN. The Altera ordering page is the primary source for the exact variant. Timing, memory, configuration, temperature-range and power figures must be selected from the corresponding tables because the 91 I/O count does not describe full device utilization.

Dữ liệu tham khảo kỹ thuật cho EP4CE10E22C8LN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EP4CE10E22C8LN for a 144-LQFP exposed-pad design that requires 10,320 logic cells, 91 I/Os, a 1.2 V core and the C8 timing class. Select EP4CE10E22C8N when its qualification fields meet the operating requirement and the LN ordering distinction is unnecessary. EP4CE10E22C7N is appropriate when its C7 timing closes with adequate margin, while EP4CE10E22C6N should be selected only after verifying the reduced speed performance. Consider EP4CE10E22I7N when its I7 qualification matches the environment and its C7 timing is acceptable. EP4CE10F23C8N offers a larger resource configuration in the same package class and may suit designs that exceed EP4CE10 capacity. None of these alternatives should be approved solely from the package name; verify ordering codes, temperature limits, timing, configuration and device utilization against the exact manufacturer documentation.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này EP4CE10E22C8N EP4CE10E22C7N EP4CE10E22C6N EP4CE10E22I7N EP4CE10F23C8N
Brand Altera Altera Altera Altera Altera Altera
Package 144-LQFP Exposed Pad 144-LQFP Exposed Pad 144-LQFP Exposed Pad 144-LQFP Exposed Pad 144-LQFP Exposed Pad 144-LQFP Exposed Pad
Device Family Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E Cyclone IV E
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Process Technology 60 nm 60 nm 60 nm 60 nm 60 nm 60 nm
Ordering Speed Code C8 C8 C7, one grade below C8 C6, two grades below C8 C7, one grade below C8 C8
Ordering Qualification Suffix LN N without the L designator N without the L designator N without the L designator I7N ordering fields C8N ordering fields
Special Feature E22 device group with exposed-pad LQFP package E22 device group with exposed-pad LQFP package E22 device group with exposed-pad LQFP package E22 device group with exposed-pad LQFP package E22 device group with exposed-pad LQFP package F23 device group with exposed-pad LQFP package

Bảo phân biệt quan trọng

  • Higher ordering speed code within the same EP4CE10 E22 package family (vsEP4CE10E22C7N)
  • Two-code speed separation from the lowest listed EP4CE10 E22 option (vsEP4CE10E22C6N)
  • Original LN ordering combination (vsEP4CE10E22C8N)
  • Lower resource scale than the F23 same-package candidate (vsEP4CE10F23C8N)

Ghi chú thiết kế

Design the exposed thermal pad as part of the power-delivery network, not as an optional copper feature. Follow the manufacturer’s land-pattern and via-array drawing, connect the pad to the designated ground plane and minimize plane interruptions beneath the package. Power estimation must use actual logic utilization, switching activity, I/O loading and ambient temperature; the 1.2 V core voltage alone cannot establish junction temperature or whether an additional heat spreader is necessary.

Use the exact 144-LQFP exposed-pad footprint and verify pad dimensions, pin numbering and thermal-via requirements against the EP4CE10 E22 package drawing. Place the device so that sensitive analog inputs and high-impedance nets are not routed beneath or immediately beside the exposed pad. Keep the ground-return path continuous and provide local core and I/O decoupling according to the Cyclone IV E power-supply guidelines.

Do not substitute a different speed or qualification code solely because the package matches. EP4CE10E22C8LN uses the C8 speed designation and the LN ordering fields; C7, C6, I7 and alternative F23 configurations can change timing, qualification or device resources. Confirm the exact ordering table, configuration compatibility, operating-temperature requirements and timing closure before approving a substitution for production.

Create clock and data constraints around the actual C8 timing characteristics and assign board-level interfaces to banks with compatible voltage standards. Separate clocks from noisy switching returns, use short reference-clock routing and avoid long stubs. Because the package combines 91 external I/Os with a large exposed pad, pin density can constrain escape routing; review escape paths and via fields before finalizing component placement.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No exact-MPN compliance declarations were identified in the manufacturer listing or catalog excerpts. Confirm RoHS, REACH, lead-free, halogen-free and automotive qualification status using the exact EP4CE10E22C8LN ordering documentation.

Tìm kiếm liên quan

EP4CE10E22C8LN EP4CE10E22C8LN datasheet EP4CE10E22C8LN datasheet pdf EP4CE10E22C8LN pinout EP4CE10E22C8LN equivalent EP4CE10E22C8LN replacement EP4CE10E22C8LN price EP4CE10E22C8LN stock Altera EP4CE10E22C8LN EP4CE10E22C8LN vs EP4CE10E22C7N EP4CE10E22C8LN application circuit EP4CE10E22C8LN 144 LQFP

Các bộ phận và thuật ngữ liên quan

Altera EP4CE10E22C8LN EP4CE10E22C8N EP4CE10E22C7N EP4CE10E22C6N EP4CE10E22I7N EP4CE10F23C8N Cyclone IV E field-programmable gate array FPGA programmable logic logic cells user I/O embedded memory E22 device group C8 speed code LN ordering code 1.2 V core supply 60 nm process 144-LQFP exposed-pad package LQFP surface-mount package semiconductor Quartus
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ