EP4CE115F29I7N - 114,480-LE Cyclone IV E FPGA | Altera
MPN: EP4CE115F29I7N ✓ Hoạt độngEP4CE115F29I7N Tóm tắt
A field-programmable gate array is a semiconductor device whose digital logic and interconnect structure can be programmed after manufacture. Within the broader hierarchy, an FPGA belongs to programmable logic devices, complements application-specific integrated circuits (ASICs), and provides hardware flexibility without requiring a custom mask set. The Cyclone IV E family combines a programmable logic fabric, embedded memory resources, and fixed-function blocks within a single integrated circuit.
The EP4CE115F29I7N ordering code identifies the EP4CE115 device in the F29 package configuration. Published product information identifies 114,480 logic elements and 528 user I/O, while the package listing identifies a 780-ball BGA. These features provide substantial parallelism for control logic, bus aggregation, protocol bridging, data acquisition, and other designs requiring numerous external connections. The 528-I/O count makes this package particularly useful when a design needs substantially more external signals than smaller FBGA options provide.
FPGA designs using this device are implemented through a hardware description such as Verilog or VHDL, followed by synthesis, place-and-route, timing analysis, and bitstream generation. Because an FPGA is a programmable-logic product rather than a fixed-function digital IC, its final performance and resource utilization depend on the design, constraints, tool version, and target device configuration. Designers must also verify the exact pin assignments, supported I/O standards, power requirements, configuration method, and timing constraints against the manufacturer documentation for the selected ordering part number.
Typical implementation areas include industrial automation controllers, network-interface and protocol-conversion equipment, test-and-measurement platforms, video or image-processing pipelines, communications infrastructure, and embedded control systems. In each case, the device can implement parallel logic, state machines, data paths, and peripheral interfaces while allowing functional revisions through configuration rather than silicon redesign. The large I/O count is particularly helpful for systems combining multiple buses, external memory interfaces, high-speed acquisition paths, and discrete control signals.
PCB implementation requires careful attention to the 780-ball BGA footprint, power delivery, decoupling, clock integrity, configuration pins, and high-speed signal routing. The manufacturer package drawing and pin-connection guidelines should govern ball assignments and escape routing. Because exact pin functions and electrical limits are not reproduced on this page, use the official device documentation when assigning voltage domains, planning I/O standards, and calculating power-distribution-network impedance.
This page consolidates the identified device attributes, package information, sourcing links, comparison context, and practical integration guidance. It is intended to accelerate engineering triage while keeping final design decisions tied to the official Cyclone IV E documentation, the EP4CE115F29I7N ordering information, and validated PCB design rules.
Bộ thay thế dễ dàng lắp đặt cho EP4CE115F29I7N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP4CE115F29I7N (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Process Technology, Logic Elements, Operating Temperature.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếEP4CE115F29I7N Tỷ lệ tối đa & tính chất điện
| Device Type | Cyclone IV E field-programmable gate array (FPGA) |
| Logic Elements | 114,480 logic elements |
| User I/O Count | 528 user I/O |
| Hộp | 780-ball F29 BGA |
| Device Family | Cyclone IV E |
| Product Line | EP4CE115 |
| Kiểu lắp đặt | Surface mount |
| Programmability | User-programmable FPGA |
Hướng dẫn cấu hình chân EP4CE115F29I7N 780-ball f29 bga
Cấu hình chân cho EP4CE115F29I7N (780-ball f29 bga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP4CE115F29I7N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP4CE115F29I7N phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Communications Interface Equipment, Test and Measurement Platform, Embedded Video Processing, Network and Storage Interface, Security and Surveillance Equipment.
Industrial Automation Controller
The EP4CE115F29I7N fits industrial automation controllers that combine machine-control logic with numerous external sensors, actuators, counters, and communications interfaces. Its 528 user I/O provides a large pin budget for parallel digital control, while 114,480 logic elements support state machines, timing blocks, protocol handling, and supervisory logic in one programmable device. The FPGA approach also allows a common hardware platform to support multiple controller configurations. Before schematic release, engineers must confirm the required I/O voltage, isolation design, timing constraints, operating-temperature range, and functional-safety obligations against the official EP4CE115 documentation.
Communications Interface Equipment
The EP4CE115F29I7N is suitable for communications equipment requiring parallel packet processing, buffering, channel control, and multiple external interfaces. The 114,480 logic elements can implement protocol engines, framing logic, CRC or checksum functions, and test features, while the 528-I/O F29 package reduces the need for additional interface logic when many backplane or mezzanine signals are required. Design engineers should assign pins according to the F29 ball map, define timing constraints for each interface, and confirm configuration and clocking requirements before committing the board layout.
Test and Measurement Platform
In a test-and-measurement platform, the EP4CE115F29I7N can coordinate acquisition channels, pattern generation, timing controls, and instrument-bus communication. The 528 user I/O allow numerous parallel stimulus and response lines to coexist with control signals, while the programmable fabric permits reusable algorithms for sequencing, triggering, calibration, and data capture. The BGA package reduces lead count but increases assembly and layout complexity, so pin-escape strategy, power integrity, thermal performance, and signal-return paths require careful validation before fabrication.
Embedded Video Processing
The EP4CE115F29I7N can support embedded video and image-processing pipelines that require deterministic parallel logic for pixel transport, filtering, synchronization, and control. Its 114,480 logic elements provide substantial configurable datapath capacity, and the 528 user I/O can connect multiple external memory or sensor interfaces when voltage and timing requirements align. Engineers must budget logic elements and routing resources for the target video format, verify supported I/O standards, and use the official timing tools to close all external-interface constraints before programming the FPGA.
Network and Storage Interface
The EP4CE115F29I7N fits network-interface and storage-control designs where programmable packet handling, bus arbitration, data movement, and status monitoring are required. The large user-I/O count supports multiple external interfaces, and the Cyclone IV E fabric allows protocol-specific logic to be updated without changing the PCB. Because direct memory-controller and high-speed interface details depend on the exact device configuration and speed grade, designers should consult the manufacturer device overview and timing documentation before selecting I/O standards, memory devices, or clock sources.
Security and Surveillance Equipment
The EP4CE115F29I7N can be used in surveillance and security equipment that coordinates sensor inputs, image channels, motion-processing logic, storage interfaces, and network control. Its 528 user I/O offers extensive connectivity for multiple sensors and peripheral buses, and its programmable fabric permits field updates to detection or control pipelines. The design must account for the 780-ball BGA assembly process, camera-interface timing, storage latency, thermal environment, and cybersecurity requirements. Exact pin assignments and electrical limits should come from the official F29 package documentation.
Dữ liệu tham khảo kỹ thuật cho EP4CE115F29I7N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Ghi chú thiết kế
Treat the 780-ball F29 BGA as a dense fine-pitch layout rather than a conventional leaded package. Assign escape routing from the manufacturer ball map, preserve the required pad and solder-mask geometry, and validate the stack-up with the assembly capability of the PCB supplier. Place decoupling structures and power-distribution connections where the device layout guidance requires them rather than relying on generic BGA practices.
Use the official power-consumption and sequencing information to define every core and I/O supply domain. Separate noisy external interfaces from sensitive internal rails where the recommended topology permits, and provide local bulk and high-frequency decoupling at the supply balls. Review the complete power budget across logic utilization, I/O activity, temperature, and configuration state because resource utilization can materially change dynamic current.
Define timing constraints for clocks, memory interfaces, serial links, and other high-speed paths before layout. Route high-speed signals over continuous reference planes where practical, avoid discontinuities in return paths, and keep configuration and sensitive clock distribution isolated from noisy interfaces. Complete post-route timing analysis and board-level signal-integrity checks because a legal FPGA timing result does not by itself validate the finished PCB.
Estimate junction temperature from actual logic utilization, I/O switching activity, ambient temperature, and board heat spreading rather than from nominal device power alone. The 780-ball package can distribute heat through many balls, but layer count, copper coverage, via arrays, enclosure temperature, and neighboring heat sources determine actual performance. Validate thermal margins at worst-case operating conditions and consider exposed-package and solder-assembly requirements from the official documentation.
Do not treat another EP4CE115 ordering code as interchangeable without checking the complete suffix. The F29 and F23 packages expose different I/O counts and ball arrangements, while speed, temperature, and qualification suffixes can change operating limits. A circuit-level substitution also requires confirmation that the configuration bitstream, tool target, memory initialization, pin assignments, and timing constraints remain valid for the replacement device.
Thông tin tuân thủ
Compliance status has not been established from the identified product summaries. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification requirements for the exact ordering part number before procurement.