FSAM30SH60A - 600V 30A 3-Phase Motion SPM2 IPM | onsemi
MPN: FSAM30SH60A ✓ Hoạt độngFSAM30SH60A Tóm tắt
A Smart Power Module is a type of intelligent power module (IPM) that combines power switches (IGBTs with integrated freewheeling diodes), their optimized gate drivers, and protection circuitry in a single compact, isolated package. Within the power electronics hierarchy, it sits above discrete IGBTs and gate-driver ICs, forming a complete power-management inverter subsystem for motor control.
Key features include built-in under-voltage lockout (UVLO) on all three high-side and low-side channels, over-current protection (OCP) realized through advanced current-sensing IGBTs, and optimized gate-drive characteristics that minimize EMI and switching losses. These protections improve system reliability in inverter-driven motor applications.
Technically, the module integrates HVIC-based gate drive with level-shifting for high-side channels, allowing a single positive 15 V supply without external bootstrap complexity on low-side rails, matched to low-loss IGBTs for efficient inverter operation in the fractional to low-horsepower range.
Typical applications include washing machine motor drives, air conditioner compressor inverters, and AC induction, BLDC, and PMSM motor drives in low-power appliance and light industrial equipment.
Design consideration: ensure bootstrap capacitor sizing and the sense-resistor value for OCP trip level are set per the manufacturer datasheet; excessive VCE(sat) rise from undersized heatsinking will degrade thermal margins.
This page synthesizes distributor availability, cross-reference alternatives, and design guidance not consolidated in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho FSAM30SH60A — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
FSBM30SH60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM30SM60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM20SH60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM10SH60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM15SM60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM30SL60A
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
FSAM30SH60A Tỷ lệ tối đa & tính chất điện
| Cấu trúc | Three-phase inverter (6 IGBTs + 6 FWDs) |
| Rated Output Current | 30 A |
| Inverter Supply Voltage Rating | 600 V class |
| Isolation Voltage | 2500 Vrms |
| Hộp | 32-PowerDIP Module (SPM32-AA), 1.370 in (34.80 mm) |
| Số lượng chân | 32 |
| Protection Features | Under-voltage lockout (UVLO), over-current protection (OCP) |
| Current Sensing | Advanced current-sensing IGBTs |
| Gate Drive | Optimized integrated gate drive (minimized EMI and losses) |
| Motor Types Supported | AC Induction, BLDC, PMSM |
| Series | Motion SPM 2 |
| Kiểu lắp đặt | Through-hole / PowerDIP module |
| Manufacturer | onsemi (originally Fairchild Semiconductor) |
| Application Target | Low-power inverter-driven AC motor drives (washing machines, air conditioners) |
Hướng dẫn cấu hình chân FSAM30SH60A 32-powerdip module (spm32-aa), 1.370 in (34.80 mm)
Cấu hình chân cho FSAM30SH60A (32-powerdip module (spm32-aa), 1.370 in (34.80 mm) gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho FSAM30SH60A.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Khu vực hoạt động an toàn
Ứng dụng tiêu biểu
FSAM30SH60A phù hợp cho 6 Áp dụngs: Washing Machine Motor Drive, Air Conditioner Compressor Inverter, BLDC / PMSM Industrial Fan and Pump Drives, AC Induction Motor General-Purpose Inverters, Refrigerator and Heat Pump Compressor Drives, Battery-Powered and Servo Prototype Inverter Stages.
Washing Machine Motor Drive
The FSAM30SH60A was explicitly developed for high-speed, low-power inverter-driven applications like washing machines, per Fairchild/onsemi product documentation. Its 600 V, 30 A three-phase rating covers the peak currents of BLDC and universal motor drives in front-load and top-load washers, while integrated UVLO and current-sensing IGBT OCP protect the inverter during tub-impact load transients. In a typical drive, a rectified 220-240 VAC bus feeds the DC link, and the module's optimized gate drive minimizes EMI that could interfere with the appliance's control electronics. The 2500 Vrms isolated PowerDIP package simplifies safety compliance in wet-environment appliances.
Được đề xuất
Air Conditioner Compressor Inverter
onsemi positions the FSAM30SH60A as a compact, high-performance inverter solution for air conditioner compressor drives. Compressor motors (rotary or scroll, typically PMSM or AC induction) draw significant starting current, and the 30 A rating of this Motion SPM 2 module provides headroom for stall-recovery transients. The current-sensing IGBT OCP responds to rotor-lock events faster than external shunt-based schemes, and the integrated gate drive with matched IGBTs keeps switching losses low at the PWM frequencies (typically 5-16 kHz) used for compressor quiet operation. The 2500 Vrms isolation rating of the SPM32-AA module supports the creepage and clearance requirements of room-air-conditioner power stages.
Được đề xuất
BLDC / PMSM Industrial Fan and Pump Drives
For HVAC blowers, circulation pumps, and industrial fans driven by BLDC or PMSM motors from a rectified single-phase 220-240 VAC bus, the FSAM30SH60A provides the complete six-switch inverter stage in one 32-pin PowerDIP module. The 600 V class rating withstands bus surges, and the 30 A rating suits frame-size motors up to roughly the low-horsepower range depending on duty cycle and heatsinking. Integrated UVLO prevents IGBT operation in the linear region during supply dips, reducing failure risk in electrically noisy industrial environments. Its through-hole PowerDIP mounting with a metal heatsink base simplifies thermal design compared with discrete D2PAK IGBT arrays.
Được đề xuất
AC Induction Motor General-Purpose Inverters
The FSAM30SH60A supports AC induction motors (V/f or sensorless FOC control) in appliances and light machinery. According to the onsemi datasheet, the module provides a fully-featured, high-performance inverter stage for AC induction, BLDC, and PMSM motors with optimized gate drive that minimizes EMI and losses. For induction motor drives, the integrated dead-time-optimized gate drive reduces shoot-through risk, and current-sensing IGBTs allow OCP thresholds to be set without external current transformers. The compact SPM32-AA footprint (34.80 mm) enables smaller drive boards suitable for integrated motor electronics in fans, pumps, and compressors.
Được đề xuất
Refrigerator and Heat Pump Compressor Drives
Refrigeration and heat-pump compressors operate continuously, making inverter efficiency the dominant factor in system energy consumption. The FSAM30SH60A's low-loss IGBTs with matched gate drive reduce switching and conduction losses across the compressor's variable-speed range, improving seasonal efficiency. On-module UVLO and OCP improve long-term reliability required for always-on appliances, and the 600 V class rating handles the DC bus of 220-240 VAC inputs including surge conditions. The isolated PowerDIP construction with integral heatsink base enables a compact power board mounted directly on the compressor housing or inside the appliance cabinet.
Được đề xuất
Battery-Powered and Servo Prototype Inverter Stages
The fully-featured three-phase stage of the FSAM30SH60A shortens prototyping cycles for inverter-based equipment: engineers can implement the entire 600 V / 30 A power stage with only bootstrap capacitors, OCP sense setting, and DC-link decoupling, rather than wiring six discrete IGBTs and three half-bridge drivers. The through-hole module is easy to socket and rework on prototype boards, and the internal equivalent circuit published in the datasheet supports simulation. This makes the module attractive for lab validation of motor-control firmware on PMSM and BLDC platforms before committing to a discrete power stage design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho FSAM30SH60A — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | FSBM30SH60A | FSAM30SM60A | FSAM20SH60A |
|---|---|---|---|---|
| Package | 32-PowerDIP Module (SPM32-AA) | 32-PowerDIP Module (SPM32) | 32-PowerDIP Module (SPM32) | 32-PowerDIP Module (SPM32-AA) |
| Brand | onsemi (Fairchild) | onsemi (Fairchild) | onsemi (Fairchild) | onsemi (Fairchild) |
| Voltage Class | 600 V | 600 V | 600 V | 600 V |
| Rated Current | 30 A | 30 A | 30 A | 20 A |
| Protection Features | UVLO + current-sensing IGBT OCP | UVLO + OCP | UVLO + OCP | UVLO + OCP |
| Motor Types | AC Induction, BLDC, PMSM | AC Induction, BLDC, PMSM | AC Induction, BLDC, PMSM | AC Induction, BLDC, PMSM |
Bảo phân biệt quan trọng
- Higher 30 A rating in the same SPM32-AA footprint (vsFSAM20SH60A)
- Current-sensing IGBT based OCP (vsFSBM30SH60A)
- Trade-off: integrated solution vs discrete flexibility (vsIGW30N60H3FKSA1)
Ghi chú thiết kế
The SPM32-AA PowerDIP module dissipates inverter losses (conduction + switching) through its metal heatsink base. Estimate total loss from VCE(sat), switching energy per pulse, PWM frequency, and RMS phase current as given in the onsemi datasheet curves, then size the heatsink so junction temperature stays within the rated maximum with margin. Undersized heatsinking in sealed appliance enclosures is the most common failure mode for this module class.
Set the OCP trip threshold through the external sense circuit per the datasheet recommendation: the current-sensing IGBTs output a scaled current, so an incorrectly valued sense resistor either trips falsely at motor start or fails to protect during rotor-lock events. Also verify all bootstrap capacitors are sized for the PWM frequency and duty-cycle extremes; undersized bootstrap causes UVLO misoperation on the high-side channels under near-100% duty conditions.
Keep the DC-link decoupling loop small: place a low-ESL snubber/decoupling capacitor close to the module's P and N terminals to suppress parasitic turn-off voltage spikes. Route the control-side sense and input signal traces away from the power loop to prevent dv/dt-induced false triggering, and follow the onsemi datasheet layout example for the SPM32-AA footprint.
Thông tin tuân thủ
Compliance status was not included in the retrieved verified web data; consult the onsemi product page and datasheet for RoHS/REACH declarations.
