KSZ8041NLJ-TR 10/100 Ethernet PHY | Microchip | 32-QFN
MPN: KSZ8041NLJ-TR ✓ Hoạt độngKSZ8041NLJ-TR Tóm tắt
An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, converts digital data into signals suitable for a twisted-pair Ethernet cable and converts received cable signals back into digital data. The KSZ8041 belongs to the PHY hierarchy within network interface controllers, interface integrated circuits, and broader communications semiconductors. Its mixed-signal design supports extended signaling distance while reducing power consumption, making it appropriate for industrial, consumer, and embedded Ethernet platforms.
The KSZ8041NLJ-TR combines 10BASE-T and 100BASE-TX operation in one device, allowing the same network port to support legacy 10 Mb/s links and Fast Ethernet links. Its MII, RMII, and SMII host interfaces provide flexibility when connecting to a microcontroller, application processor, or dedicated Ethernet controller. Automatic MDI/MDIX handling also helps simplify implementation where either straight-through or crossover cabling may be encountered.
The 32-QFN package supports compact, surface-mount PCB construction while providing the exposed thermal-pad area expected for this package family. Its 3.3 V single-supply architecture simplifies power planning in systems that already operate at 3.3 V. The KSZ8041NLJ-TR variant supports an extended temperature range up to 125 °C, making it suitable for industrial and other thermally demanding equipment when the complete system is designed for those conditions.
Typical applications include industrial Ethernet controllers, embedded Linux platforms, factory automation equipment, network-connected sensors, set-top boxes, printers, and compact communication modules. The PHY can be used behind a processor with an RMII interface or behind a controller with MII or SMII signaling. Designers must still provide correct magnetic-interface circuitry, decoupling, reference-clock implementation, and PCB routing compliant with the manufacturer’s reference layout.
For a new design, use the manufacturer’s recommended Ethernet magnetics, termination, and exposed-pad layout exactly. Keep the digital MII, RMII, or SMII traces away from the analog magnetics interface, provide clean 3.3 V supply routing, and account for the QFN exposed pad in both assembly and thermal planning.
This page combines the manufacturer product information, interface and package characteristics, sourcing guidance, drop-in alternatives, comparison parameters, and practical PCB implementation notes to support faster engineering evaluation and component selection.
Bộ thay thế dễ dàng lắp đặt cho KSZ8041NLJ-TR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với KSZ8041NLJ-TR (cùng hình factor và footprint) — khác nhau ở Package, Supply Voltage, Data Rate, Product Type, Host Interface.
KSZ8041NL-AM
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →KSZ8041RNL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →KSZ8041MLL-TR
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →KSZ8041FTL-TR
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →KSZ8081MNXCA-TR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
KSZ8041NLJ-TR Thông số kỹ thuật
| Product Type | 10/100 Ethernet physical-layer transceiver |
| Ethernet Support | 10BASE-T and 100BASE-TX |
| Nominal Data Rate | 10 Mb/s and 100 Mb/s |
| Điện áp cung cấp | 3.3 V |
| Host Interface | MII, RMII, and SMII |
| Hộp | 32-QFN (5 mm x 5 mm) |
| Kiểu lắp đặt | Surface mount |
| Maximum Operating Temperature | 125 °C |
| Auto MDI/MDIX | Supported |
| Architecture | Mixed-signal Ethernet physical layer |
| Supply Configuration | Single supply |
| Exposed Pad | Present in 32-QFN package |
| Tốc độ dữ liệu | 100 Mb/s maximum |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân KSZ8041NLJ-TR 32-qfn (5 mm x 5 mm)
Cấu hình chân cho KSZ8041NLJ-TR (32-qfn (5 mm x 5 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho KSZ8041NLJ-TR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
KSZ8041NLJ-TR phù hợp cho 6 Áp dụngs: Industrial Ethernet Controller, Embedded Linux Network Appliance, Network-Connected Sensor Node, Factory Automation Terminal, Network Printer Controller, Set-Top Box Ethernet Port.
Industrial Ethernet Controller
The KSZ8041NLJ-TR fits industrial embedded controllers that require a dedicated 10/100 Ethernet physical layer beside a microcontroller or application processor. Its 3.3 V single-supply operation aligns with common embedded logic rails, while MII, RMII, and SMII interfaces provide several host-controller options. The 10BASE-T/100BASE-TX support allows one port to connect to both 10 Mb/s and 100 Mb/s equipment. Automatic MDI/MDIX handling reduces cabling complexity in factory installations. Designers should follow the manufacturer’s recommended magnetics, clock, decoupling, and exposed-pad layout, and should verify the complete assembly across its intended temperature range.
Được đề xuất
Embedded Linux Network Appliance
The KSZ8041NLJ-TR is suitable for embedded Linux gateways and compact network appliances requiring a 10/100 Mb/s copper-Ethernet port. An RMII host interface can reduce the number of parallel data signals compared with MII, while the PHY handles the analog conversion between the host logic and the Ethernet magnetics. Its single 3.3 V supply simplifies integration with processors operating on 3.3 V I/O. The device supports both 10BASE-T and 100BASE-TX, providing compatibility with slower legacy equipment. Robust implementation requires a clean reference clock, short digital traces, controlled return paths, correct magnetic-component selection, and a 32-QFN land pattern that properly connects the exposed pad.
Được đề xuất
Network-Connected Sensor Node
The KSZ8041NLJ-TR can provide wired 10/100 Ethernet connectivity for a sensor node or remote monitoring terminal when a shared network link is preferable to wireless communication. Its 3.3 V operation supports compact embedded systems, and the mixed-signal PHY reduces the need for a separate Ethernet transceiver and magnetics implementation. Automatic MDI/MDIX support helps installations using direct or crossover connections. For industrial monitoring, the extended operating range to 125 °C can support thermally demanding environments, although system-level thermal validation remains necessary. Keep the PHY, magnetics, and analog network traces away from sensitive sensor circuitry, and use manufacturer-recommended isolation or surge-protection arrangements where required by the installation environment.
Được đề xuất
Factory Automation Terminal
The KSZ8041NLJ-TR supports factory automation terminals that communicate over existing 10/100 Mb/s Ethernet infrastructure. The MII, RMII, or SMII interface allows the digital controller to be selected according to processor resources and timing requirements, while the PHY provides the common cable-side signaling. Supporting both 10BASE-T and 100BASE-TX allows terminal installation alongside legacy and Fast Ethernet equipment. The 32-QFN package supports compact board layouts, but correct exposed-pad soldering is essential for mechanical reliability and heat transfer. Industrial qualification of the finished product, grounding, surge protection, cable immunity, and environmental testing should be handled separately from the component-level temperature rating.
Được đề xuất
Network Printer Controller
The KSZ8041NLJ-TR is applicable to network printers and multifunction peripherals that need an economical 10/100 Mb/s Ethernet port. A dedicated controller or embedded processor can use RMII, MII, or SMII to exchange packets with the PHY, while automatic MDI/MDIX operation accommodates common installation cabling. The 3.3 V single-supply architecture reduces the number of rails required beside the printer’s digital logic. Its 32-QFN footprint allows a compact implementation, although the exposed pad and magnetics area need careful layout to minimize thermal stress and analog coupling. Validate the reference-clock arrangement and interface timing against the specific host controller before releasing the PCB.
Được đề xuất
Set-Top Box Ethernet Port
The KSZ8041NLJ-TR can add a wired 10/100 Ethernet connection to a set-top box, smart appliance, or consumer gateway with an embedded host controller. The 3.3 V PHY fits many 3.3 V system rails and supports 10BASE-T/100BASE-TX links without requiring gigabit Ethernet circuitry. RMII provides a practical host interface for processors with limited parallel I/O, while MII or SMII offers alternatives for different control architectures. Automatic MDI/MDIX handling reduces installation complexity. Board implementation should follow the manufacturer’s recommended Ethernet-magnetics topology and maintain separation between the digital host interface and analog network section. Confirm regulatory, isolation, and cable-length requirements for the target market before production release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho KSZ8041NLJ-TR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | KSZ8041NL | KSZ8041RNL | KSZ8041MLL-TR | KSZ8041FTL-TR | KSZ8081MNXCA-TR |
|---|---|---|---|---|---|---|
| Package | 32-QFN (5 mm x 5 mm) | 32-QFN (5 mm x 5 mm) | 32-QFN (5 mm x 5 mm) | 32-QFN (5 mm x 5 mm) | 32-QFN (5 mm x 5 mm) | 32-QFN (5 mm x 5 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Type | 10/100 Ethernet physical-layer transceiver | 10/100 Ethernet physical-layer transceiver | 10/100 Ethernet physical-layer transceiver | 10/100 Ethernet physical-layer transceiver | 10/100 Ethernet physical-layer transceiver | 10/100 Ethernet physical-layer transceiver |
| Ethernet Support | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX | 10BASE-T and 100BASE-TX |
| Maximum Data Rate | 100 Mb/s | 100 Mb/s | 100 Mb/s | 100 Mb/s | 100 Mb/s | 100 Mb/s |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
Bảo phân biệt quan trọng
- Supports three host-interface styles in one Ethernet PHY (vsKSZ8081MNXCA-TR)
- Extended operating-temperature capability (vsKSZ8041NL)
- Broad legacy and Fast Ethernet compatibility (vsKSZ8041RNL)
- Single 3.3 V supply simplifies embedded integration (vsKSZ8041MLL-TR)
Ghi chú thiết kế
Use the manufacturer’s 32-QFN land pattern and recommended Ethernet layout rather than a generic QFN footprint. Place the PHY, magnetics, termination, and decoupling components in the documented order, and keep the MII, RMII, and SMII routing away from the analog network section. The exposed pad must receive the datasheet-specified thermal and electrical connection, including the required paste and solder treatment. A controlled impedance environment and continuous reference plane help minimize reflections on high-speed RMII and MII signals.
Provide a low-impedance 3.3 V supply and place the required bypass capacitors directly beside the appropriate power and ground pins. Separate the PHY supply path from noisy processor and switching-converter outputs to limit conducted coupling into the Ethernet analog circuitry. Confirm the host clock voltage levels, interface signal levels, and sequencing against the selected controller. Avoid adding undocumented bulk or filtering capacitance that could alter startup behavior or reference-clock stability.
Do not select a replacement solely because it is also a 10/100 Ethernet PHY. Confirm the 32-QFN dimensions, exposed-pad connection, pin-to-pin signal assignments, MII/RMII/SMII availability, reference-clock requirements, reset behavior, and maximum operating temperature. Also verify the magnetic-component topology and isolation requirements. A functionally similar PHY with different pin assignments or clock architecture can require PCB changes, making it unsuitable as a drop-in substitute.
The 32-QFN package uses its exposed pad as an important thermal path. Follow the manufacturer’s solder-mask, paste, and reflow guidance to achieve reliable attachment while controlling voiding beneath the device. Provide adequate local copper without compromising the analog-signal layout, and evaluate the board’s thermal performance at the highest ambient temperature. The component’s 125 °C maximum operating rating does not remove the need to verify junction temperature, nearby component temperatures, and enclosure temperature rise.
Treat the reference clock and high-speed host interface as controlled digital signals. Route them over a continuous ground reference, avoid unnecessary stubs and test pads, and observe the controller and PHY interface timing requirements. Keep clock routing away from the magnetics and line-driver area. Ethernet cable-side performance also depends on correctly selected magnetics, controlled termination, suitable copper geometry, and compliance with the manufacturer’s reference layout and isolation strategy.
Thông tin tuân thủ
Compliance declarations require confirmation from the current Microchip product documentation or a traceable supplier statement.