KSZ8441FHLI - 10/100 Ethernet Controller | Microchip
MPN: KSZ8441FHLI ✓ Hoạt độngKSZ8441FHLI Tóm tắt
An Ethernet controller with an integrated MAC and PHY combines frame processing, physical-layer signaling, and host connectivity in one device. The KSZ8441 family is intended for industrial Ethernet endpoints that require reliable 10Base-T/100Base-TX communication together with precise network timing. IEEE 1588v2 support is particularly relevant when multiple devices must exchange synchronized time or operate against a common time base across an Ethernet network.
The KSZ8441FHLI supports 10/100 Ethernet operation and provides a generic host interface for connecting the controller to an embedded processor or host controller. Fibre support expands the design options for industrial networks where copper reach, galvanic isolation, or long link distances make optical links more appropriate. The integrated MAC and PHY reduce the number of external components required for a complete network node.
The 64-LQFP (10x10 mm) package provides a compact surface-mount footprint while exposing the controller, PHY, host interface, clock, power, and configuration connections required for a complete design. Because the device combines digital control logic with mixed-signal PHY functions, layout should separate high-speed network connections from sensitive clock and power routing.
Typical applications include industrial Ethernet switches, factory automation equipment, networked motion controllers, embedded test systems, industrial gateways, and precision-timing equipment. The 10/100 rate supports legacy industrial infrastructure where full Gigabit Ethernet is unnecessary, while IEEE 1588v2 functionality adds value where synchronized events or distributed control timing are required.
When designing a PCB around the KSZ8441FHLI, follow the manufacturer pin-description table and reference layout recommendations exactly, particularly for the crystal or clock source, Ethernet differential pairs, and decoupling network. Validate magnetics or fibre-interface components against the selected network topology and confirm the host interface timing with the processor used in the design.
This page consolidates the verified device identity, Ethernet capabilities, timing standard, package information, sourcing links, and practical integration considerations. It also separates documented facts from parameters that require confirmation against the manufacturer datasheet and PCB design resources.
Bộ thay thế dễ dàng lắp đặt cho KSZ8441FHLI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
KSZ8441RNXC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
KSZ8441RNXI
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
KSZ8441RNXA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
KSZ8441RNXB
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
KSZ8441FHLI Thông số kỹ thuật
| Ethernet Data Rate | 10/100 Mb/s |
| Ethernet Standard | 10Base-T/100Base-TX |
| Device Type | Ethernet controller with internal MAC and PHY |
| Precision Time Protocol | IEEE 1588v2 |
| Host Interface | Generic host interface |
| Fibre Support | Supported |
| Hộp | 64-LQFP (10 x 10 mm) |
| Kiểu lắp đặt | Surface mount |
| Manufacturer | Microchip Technology |
| Product Description | IEEE 1588v2-enabled 10/100 Ethernet endpoint controller |
| Integrated MAC | Yes |
| Integrated PHY | Yes |
Hướng dẫn cấu hình chân KSZ8441FHLI 64-lqfp (10 x 10 mm)
Cấu hình chân cho KSZ8441FHLI (64-lqfp (10 x 10 mm) gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho KSZ8441FHLI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
KSZ8441FHLI phù hợp cho 6 Áp dụngs: Industrial Ethernet Automation Controller, Precision-Timing Network Endpoint, Factory Automation Gateway, Embedded Test and Measurement Equipment, Networked Motion and Sensor Controller, Legacy 100 Mb/s Network Endpoint.
Industrial Ethernet Automation Controller
The KSZ8441FHLI fits industrial automation equipment that communicates over a 10/100 Mb/s Ethernet network and benefits from an integrated MAC, PHY, and host interface. It removes the need for a separate Ethernet PHY when the attached processor does not already include one, reducing board area and external component count. IEEE 1588v2 support can improve event synchronization across machines that coordinate motion, alarms, or process steps, while the 64-LQFP footprint supports compact controller assemblies.
Được đề xuất
Precision-Timing Network Endpoint
The KSZ8441FHLI is appropriate for industrial Ethernet endpoints that must exchange or maintain accurate time using IEEE 1588v2. Its internal MAC and PHY provide a compact network path for host-generated synchronization messages, while the generic host interface allows the timing application to run in an embedded processor. This combination is useful in test systems and coordinated automation where event ordering and distributed time accuracy matter more than Gigabit throughput.
Được đề xuất
Factory Automation Gateway
A factory gateway built around the KSZ8441FHLI can bridge 10/100 Base-T and 100Base-TX industrial networks while adding precise timing capabilities. The integrated MAC and PHY reduce the number of active devices required on the board, and fibre support helps extend connectivity where copper cabling limits distance or introduces unwanted coupling. The device is suited to protocol conversion equipment, remote I/O aggregation, and supervisory control nodes linked to legacy industrial infrastructure.
Được đề xuất
Embedded Test and Measurement Equipment
The KSZ8441FHLI can provide network connectivity and time synchronization in embedded test equipment that must coordinate measurements across multiple devices. IEEE 1588v2 support is valuable when acquisition nodes need a common time reference for correlating captured data. The 10/100 Mb/s rate is sufficient for laboratory automation and control traffic, while the integrated controller reduces the burden on a host processor that does not include Ethernet media access.
Được đề xuất
Networked Motion and Sensor Controller
The KSZ8441FHLI suits distributed motion-control and sensing nodes that exchange commands and data over 10/100 Ethernet. The integrated MAC and PHY leave the embedded processor more resources for control algorithms, while IEEE 1588v2 can support coordinated events across machines. Fibre support gives integrators a path to longer or electrically isolated links, and the 64-LQFP package supports compact controller boards with limited routing area.
Được đề xuất
Legacy 100 Mb/s Network Endpoint
The KSZ8441FHLI is a practical fit for industrial equipment that still communicates through 10Base-T or 100Base-TX links. It combines the Ethernet endpoint functions required by an embedded host into one controller, helping modernize a control platform without introducing a larger, unnecessary Gigabit design. The generic host interface provides a defined integration path, and IEEE 1588v2 adds synchronization capability that basic legacy Ethernet controllers may not offer.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho KSZ8441FHLI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Microchip Technology |
| Package | 64-LQFP (10 x 10 mm) |
| Ethernet Data Rate | 10/100 Mb/s |
| Ethernet Physical Layer | 10Base-T/100Base-TX |
| Integrated MAC | Yes |
| Integrated PHY | Yes |
| Precision Time Protocol | IEEE 1588v2 |
| Host Interface | Generic host interface |
| Fibre Support | Supported |
Bảo phân biệt quan trọng
- Integrated endpoint controller rather than a PHY-only device (vsKSZ8041)
- Precision network timing support (vsKSZ8041)
- Fibre-oriented deployment support (vsKSZ8041)
Ghi chú thiết kế
Route the Ethernet differential pairs as controlled-impedance, tightly coupled traces and follow the manufacturer reference layout for the KSZ8441 family. Keep the clock source and its support components away from the PHY routing area, and place the required decoupling capacitors close to their associated supply pins. Continuous ground references beneath high-speed and clock routes reduce return-path discontinuities and coupling.
Implement the manufacturer's recommended supply network and decoupling arrangement before schematic release. Confirm the operating voltage range, per-pin current limits, power-up sequencing, and exposed-pad connection directly in the datasheet because those values are required for reliable operation of the integrated MAC, PHY, digital logic, and clock circuitry.
Do not substitute a basic Ethernet PHY for the KSZ8441FHLI without redesigning the host interface and software architecture. The KSZ8041 provides only the physical-layer function and exposes MII, RMII, or SMII interfaces, whereas the KSZ8441FHLI integrates an endpoint MAC and IEEE 1588v2 features. Validate the complete 64-LQFP footprint, pin functions, and timing requirements against the manufacturer documentation.
Thông tin tuân thủ
The manufacturer documentation and product materials should be consulted for RoHS, REACH, halogen-free, and conflict-minerals declarations. IEEE 1588v2 is an Ethernet timing standard, not an automotive qualification.