LC4064C-25T44C - 64-Macrocell 2.5ns CPLD | Lattice
MPN: LC4064C-25T44C ✗ Cuối đờiLC4064C-25T44C Tóm tắt
A complex programmable logic device is a programmable digital IC that combines AND-array logic, OR-array logic, and programmable interconnect in a single non-volatile architecture. Within the broader semiconductor hierarchy, a CPLD sits between fixed-function logic gates and field-programmable gate arrays. It offers deterministic timing, low power consumption, and simple architecture for glue logic, control logic, bus decoding, and interface adaptation.
Key features of the LC4064C-25T44C include 64 macrocells, 30 user I/O pins, a 2.5 ns maximum propagate delay, and a 400 MHz device-class speed designation. In-system programmability supports field updates, while the 1.8 V, 2.5 V, and 3.3 V supply options accommodate mixed-voltage system designs. The 44-pin TQFP package provides a manageable pin count for compact control and interface boards.
The -25C ordering option identifies the 2.5 ns performance grade, while the -T44C suffix identifies the 44-pin TQFP configuration and commercial temperature designation. Because the device uses a deterministic macrocell structure, timing behavior and routing remain predictable after programming. This makes the LC4064C useful when a design must implement several decoder and control functions while retaining a single, compact integrated package.
Typical applications include peripheral bus decoding, address and command register logic, industrial control interfaces, legacy glue logic, and programmable signal conditioning. The 30 user I/O pins are sufficient for multi-bit data buses and control lines, while in-system programmability simplifies board bring-up and field configuration changes. The device can also serve as a companion controller in systems where an FPGA or microcontroller handles the primary processing function.
When designing a PCB for this CPLD, assign the power, ground, programming, and user I/O pins directly from the manufacturer pin-description table. Keep the in-system programming interface accessible, follow the recommended bypass-capacitor placement, and confirm signal-scheme compatibility for 1.8 V, 2.5 V, or 3.3 V operation before releasing the layout.
This page consolidates device characteristics, family-level alternatives, and practical implementation guidance. It also organizes the information an engineer normally has to piece together from the datasheet, distributor listings, and cross-reference resources when planning a CPLD replacement or control-logic redesign.
Bộ thay thế dễ dàng lắp đặt cho LC4064C-25T44C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4064C-25T44C (cùng hình factor và footprint) — khác nhau ở Architecture, Speed Grade, Device Type, Supply Voltage Options.
LC4064C-25T44I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4064C-25TN44C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064C-75T44C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →LC4064C-75T44I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064C-75TN44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4064C-75TN44I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4064C-25T44C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Series | ispMACH 4000C |
| Architecture | SuperFAST high-density PLD |
| Macrocell Count | 64 macrocells |
| Maximum Propagate Delay | 2.5 ns |
| Maximum Device Frequency | 400 MHz |
| User I/O Pins | 30 pins |
| Total Package Pins | 44 pins |
| Package Type | 44-pin TQFP |
| Kiểu lắp đặt | Surface mount |
| Supply Voltage Options | 3.3 V / 2.5 V / 1.8 V |
| Programmability | In-system programmable |
| Programmable Logic Type | SuperFAST high-density PLD |
Hướng dẫn cấu hình chân LC4064C-25T44C 44-pin tqfp
Cấu hình chân cho LC4064C-25T44C (44-pin tqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064C-25T44C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064C-25T44C phù hợp cho 6 Áp dụngs: Industrial Peripheral Bus Decoding, Programmable Control and Interlock Logic, Legacy Communications Interface Adaptation, Test and Measurement Control Logic, Programmable Signal Conditioning, Legacy Equipment Maintenance and Spare Boards.
Industrial Peripheral Bus Decoding
The LC4064C-25T44C suits peripheral bus decoding where a microcontroller or processor must retain control of a complex address map. Its 30 user I/O pins can support address, chip-select, read/write, and interrupt-control signals, while the 64 macrocells provide capacity for multiple decode equations. The 2.5 ns maximum propagate delay helps preserve margin in control paths, although the system timing budget must still include external logic and interconnect delay. In-system programmability allows the decode map to be revised during assembly or field service without replacing the device.
Được đề xuất
Programmable Control and Interlock Logic
The LC4064C-25T44C can implement machine-control interlocks, state transitions, and discrete output logic while a microcontroller manages higher-level sequencing. Sixty-four macrocells allow several related Boolean functions to be consolidated, and the 30 user I/O pins provide connections to sensors, relay drivers, and status indicators. The deterministic CPLD architecture is valuable where predictable propagation delays are required. Because the LC4064C family is discontinued, a maintained installation may use this device for spare-board repair, while a new machine design should assess current programmable-logic options and long-term availability.
Được đề xuất
Legacy Communications Interface Adaptation
The LC4064C-25T44C is useful for adapting older communications equipment to a newer controller by translating signal polarity, bus direction, and handshake sequencing into programmable logic. Its 30 user I/O pins can support parallel data, status, and clock-related interface functions. In-system programming permits configuration changes during test or maintenance, reducing the need for a board respin. The 2.5 ns grade also provides more timing margin than the 7.5 ns family option on paths connected to older, slower peripherals, provided the external bus timing is also validated.
Được đề xuất
Test and Measurement Control Logic
In instrument-control boards, the LC4064C-25T44C can consolidate trigger sequencing, mode selection, relay control, and status decoding into one programmable device. Thirty user I/O pins support front-panel control and backplane signals, while the 64-macrocell architecture handles multiple interdependent control equations. The 2.5 ns maximum propagate delay suits deterministic control paths that must coordinate with measurement timing. Its in-system programming capability also permits calibration of control sequences in production test, reducing rework when a test configuration changes.
Được đề xuất
Programmable Signal Conditioning
The LC4064C-25T44C can perform signal conditioning between sensors, converters, and a host processor by implementing polarity correction, edge qualification, pulse stretching, and interlock equations. Its 30 user I/O pins allow several related channels to be handled in a single package, and the 64 macrocells allow several functional blocks to share one device. The SuperFAST architecture supports compact, deterministic implementations, but timing must be checked against the slowest external signal. The 1.8 V, 2.5 V, and 3.3 V operating options help bridge mixed-voltage subsystems when the board's I/O rules are followed.
Được đề xuất
Legacy Equipment Maintenance and Spare Boards
The LC4064C-25T44C is particularly relevant to maintenance of industrial controllers, analyzers, and communications equipment that used ispMACH 4000C-family logic. Its 44-pin TQFP package and 30 user I/O pins allow a replacement to fit the same board architecture, while in-system programming supports configuration recovery and test. When building a spare, verify the board's supply voltage, programming interface, timing constraints, and exact device suffix. Because the family is discontinued, secure the required quantity and inspect each lot for traceability and known programming reliability.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064C-25T44C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064C-25T44I | LC4064C-25TN44C | LC4064C-75T44C | LC4064C-75T44I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 44-pin TQFP | 44-pin TQFP - same footprint | 44-pin TQFP - same footprint | 44-pin TQFP - same footprint | 44-pin TQFP - same footprint |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD |
| Series | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C | ispMACH 4000C |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| Maximum Propagate Delay | 2.5 ns | 2.5 ns | 2.5 ns | 7.5 ns | 7.5 ns |
Bảo phân biệt quan trọng
- Faster timing grade within the same package (vsLC4064C-75T44C)
- Industrial-suffix option retains the fast grade (vsLC4064C-25T44C)
- Compact logic consolidation (vsATF22LV10C-10SU)
Ghi chú thiết kế
Route the in-system programming signals to an accessible test point or connector so the device can be configured after PCB assembly. Follow the manufacturer pin-description table for programming, clock, configuration, power, and ground assignments rather than relying on package position alone. Place the required bypass capacitors close to their designated pins and keep sensitive programming traces away from high-current switching nodes.
Analyze each external path against the selected 2.5 ns or 7.5 ns propagate-delay grade before substituting a device with the same footprint. The slower LC4064C-75 variants add 5 ns of device delay, which can break an interface budget even when the pin arrangement is unchanged. Include board trace delay, connector loading, and any external interface timing in the system-level calculation.
Select the supply rail to match the device's operating-voltage option and the voltage thresholds of every connected interface. Verify both core and I/O supply limits against the datasheet before using mixed 1.8 V, 2.5 V, or 3.3 V signaling. Keep supply distribution paths short, provide local decoupling, and avoid relying on the CPLD's programmable outputs to deliver power to external loads.
Do not treat a matching package as proof of automatic interchangeability. Compare the macrocell count, I/O mapping, power configuration, programming interface, timing grade, and temperature-grade suffix. For the LC4064C-25T44C, the 2.5 ns grade and exact ordering suffix can affect sourcing and system timing, so record and verify the complete manufacturer part number on each assembly document.
Thông tin tuân thủ
The LC4064C family is discontinued. Compliance documents should be confirmed with the manufacturer or the authorized documentation source for the exact device lot.