LC4064ZC-5M56I - 64-Macrocell 200MHz CPLD | Lattice Semiconductor
MPN: LC4064ZC-5M56I ✗ Cuối đờiLC4064ZC-5M56I Tóm tắt
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines AND/OR-style logic structures with nonvolatile configuration memory. In the broader hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a field-programmable gate array. Lattice’s ispMACH 4000Z family is positioned for designs requiring more logic density and higher performance than small legacy GAL devices while retaining in-system programmability.
The LC4064ZC-5M56I provides 64 macrocells and 4 logic elements according to the manufacturer-product information, with a listed maximum operating frequency of 200 MHz. Its 56-CSBGA package uses a 6 mm x 6 mm ball-grid-array format. The device is also identified as supporting 1.8 V, 2.5 V, and 3.3 V supply configurations, allowing it to sit within mixed-voltage embedded systems when its power architecture and I/O rules permit.
The principal design benefit is consolidated programmable logic in a compact package. The 56-pin CSBGA footprint can reduce board area compared with larger leaded or plastic packages, but it requires careful escape routing, fine-pitch assembly capability, and inspection during PCB fabrication. Because the LC4064ZC-5M56I is a CPLD rather than an FPGA, it is generally considered for glue-logic, control, decoding, interface, and fixed datapath functions where deterministic configuration and compact implementation are important.
Typical uses include industrial control logic, data-acquisition interfaces, communication protocol handling, embedded system arbitration, and compact instrumentation. The 200 MHz frequency rating makes it suitable for moderate-speed control and datapath logic, while the 64-macrocell resource count supports multiple parallel logic blocks. Designers should confirm the exact timing budget, I/O standards, pin assignments, and configuration requirements against the manufacturer datasheet before releasing a PCB.
For implementation, plan the power rails, decoupling, programming interface, JTAG access, and all 56 BGA lands during schematic capture. Keep sensitive or high-speed routes away from programming and configuration activity where practical, and validate the assembled board with continuity and X-ray inspection because hidden BGA solder joints cannot be visually inspected from the top side. This page combines the exact device identifiers, package information, search-suggested documentation queries, and engineering guidance for LC4064ZC datasheet, pinout, replacement, and application-circuit planning.
Bộ thay thế dễ dàng lắp đặt cho LC4064ZC-5M56I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LC4064ZC-75M56I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064ZC-5M56C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064ZC-5MN56I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064ZC-5MN56C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064ZC-5M56I Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000Z |
| Macrocells | 64 |
| Logic Elements | 4 |
| Maximum Operating Frequency | 200 MHz |
| Điện áp cung cấp | 1.8 V |
| Supported Supply Configurations | 1.8 V, 2.5 V, or 3.3 V |
| Package Type | CSBGA-56 |
| Package Dimensions | 6 mm x 6 mm |
| Số chân | 56 |
| Kiểu lắp đặt | Surface Mount |
| Programming Type | In-System Programmable |
| Logic Family | CMOS |
| Lead-Free Status | Lead Free |
Hướng dẫn cấu hình chân LC4064ZC-5M56I 6 mm x 6 mm
Cấu hình chân cho LC4064ZC-5M56I (6 mm x 6 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064ZC-5M56I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064ZC-5M56I phù hợp cho 6 Áp dụngs: Industrial Control and Logic Arbitration, Data-Acquisition Interface Conditioning, Communication Protocol Formatting, Embedded System Interface Consolidation, Instrumentation Control and Sequencing, Automotive and Vehicle Control Logic.
Industrial Control and Logic Arbitration
The LC4064ZC-5M56I fits compact industrial control blocks where several Boolean decision paths must operate deterministically without occupying a large FPGA. Its 64 macrocells provide a defined programmable-logic resource, while the 200 MHz maximum operating frequency supports moderate-speed arbitration and sequencing. Place it beside the controller to combine sensor decoding, interlock logic, command qualification, and timing gates. The 56-CSBGA package also keeps the logic close to fine-pitch circuitry, although industrial designs must confirm the device’s operating-temperature grade before deployment. Use the manufacturer timing tables to establish worst-case path delays and verify every bank’s voltage and I/O-standard constraints.
Được đề xuất
Data-Acquisition Interface Conditioning
The LC4064ZC-5M56I can implement capture sequencing, channel selection, trigger alignment, and data-valid generation around a data-acquisition front end. With 64 macrocells and a listed 200 MHz operating frequency, it can consolidate fixed datapath functions that would otherwise occupy multiple programmable-logic devices. Its 1.8 V-centered supply arrangement is relevant to mixed-voltage signal chains, but each I/O bank must be checked for allowable voltage and drive limits. Use it for control-only functions rather than high-speed analog digitization, and establish setup and hold margins from the manufacturer timing tables before connecting an ADC, latch, or parallel data bus.
Được đề xuất
Communication Protocol Formatting
The LC4064ZC-5M56I is suited to protocol-formatting logic that must combine parallel data, status flags, and timing signals before they reach a serial transceiver. Its 64 macrocells can support state machines, byte alignment, framing checks, and programmable delays, while the 200 MHz rating accommodates moderately fast parallel-side logic. The device is particularly useful when fixed glue logic must be placed close to an interface to reduce routing complexity. In implementation, assign I/O standards to match the connected bus, avoid relying on undocumented default pin behavior, and validate timing against both the CPLD and the connected transceiver or controller.
Được đề xuất
Embedded System Interface Consolidation
The LC4064ZC-5M56I can consolidate address decoding, interrupt qualification, chip-select generation, and peripheral glue logic around a microcontroller or application processor. Its 64 macrocells are useful for moderate fan-out, while the compact 56-CSBGA package supports dense board layouts. The part is especially relevant where several legacy control functions must be retained without increasing discrete logic count. Define ownership of every I/O clearly, program deterministic defaults for unused pins, and validate boot behavior before peripheral power becomes stable. Because the device is programmable, include the configuration file in controlled documentation so hardware and firmware revisions remain synchronized.
Được đề xuất
Instrumentation Control and Sequencing
The LC4064ZC-5M56I can implement deterministic measurement sequencing, relay-command qualification, range selection, and status encoding in compact instrumentation. A 200 MHz maximum operating frequency supports fast control paths, while the 64 macrocells accommodate parallel sub-blocks without requiring a large FPGA. Keep sensitive analog and reference circuitry physically separated from the digital CPLD, and route control outputs away from high-impedance analog nodes to reduce coupling. The 56-ball package demands careful fan-out, but it offers substantial placement flexibility on a densely populated measurement board. Validate timing against worst-case process, voltage, and temperature conditions using the manufacturer’s published limits.
Được đề xuất
Automotive and Vehicle Control Logic
The LC4064ZC-5M56I can be evaluated for compact vehicle control logic that coordinates discrete switches, sensors, and communication handshakes. Its 64 macrocells and 200 MHz operating frequency provide useful logic density for arbitration and signal conditioning, while the small CSBGA footprint can assist space-constrained layouts. Vehicle use cannot be selected from the base MPN alone: confirm the exact suffix, temperature grade, automotive qualification status, I/O fault tolerance, and supply requirements in the manufacturer documentation. If those conditions are satisfied, the CPLD can consolidate several fixed control functions; otherwise, retain a device explicitly qualified for the vehicle application.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064ZC-5M56I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064ZC-75M56I | LC4064ZC-5M56C | LC4064ZC-5MN56I | LC4064ZC-5MN56C |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | CSBGA-56 | CSBGA-56 | CSBGA-56 | CSBGA-56 | CSBGA-56 |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD |
| Product Family | ispMACH 4000Z | ispMACH 4000Z | ispMACH 4000Z | ispMACH 4000Z | ispMACH 4000Z |
Bảo phân biệt quan trọng
- Compact 56-CSBGA implementation (vsLC4064ZC-5M56C)
- Established 200 MHz device class (vsLC4064ZC-5MN56I)
- Same-package industrial replacement path (vsLC4064ZC-75M56I)
Ghi chú thiết kế
Create the LC4064ZC-5M56I land pattern directly from the manufacturer’s 56-CSBGA package drawing. Preserve the specified pad geometry, solder-mask opening, copper definition, and ball numbering orientation rather than deriving coordinates from a generic BGA library. Because hidden joints require X-ray inspection, include inspection access in the assembly plan and avoid placing tall passives where they obstruct rework or visual inspection.
Plan all supply and ground connections directly from the datasheet ball map, then provide local high-frequency decoupling at the device pins. Separate noisy return currents from sensitive logic references and verify the power distribution network with the manufacturer’s recommended stack-up and current requirements. The listed 1.8 V operation should be reconciled with every connected I/O bank and the voltage tolerated by the programming interface before schematic release.
Use the manufacturer timing tables to budget external clock, data, and control paths against the LC4064ZC-5M56I’s 200 MHz maximum operating frequency; the maximum frequency is not a substitute for worst-case timing analysis. Keep configuration and programming access isolated from sensitive signal routes where practical, provide defined levels during reset and power transitions, and verify setup and hold requirements for every external device connected to the CPLD.
Do not substitute a similarly suffixed Lattice MPN solely from its package name. Before treating LC4064ZC-75M56I, LC4064ZC-5M56C, LC4064ZC-5MN56I, or LC4064ZC-5MN56C as interchangeable, compare speed grade, temperature grade, device options, pin functions, timing, supply configuration, and programming-file compatibility. Archive the exact JEDEC programming file with the PCB release records to prevent configuration mismatches.
Thông tin tuân thủ
The indexed component information identifies the package as lead-free CSBGA-56. No explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification statement is available for this exact ordering code.