Lattice Semiconductor

LC4384V-5T176C - 384-Macrocell 5 ns CPLD | Lattice

MPN: LC4384V-5T176C ✓ Hoạt động
3.3 V Vdss LQFP-176 Package 400 MHz Speed
MOQ: 1 |

LC4384V-5T176C Tóm tắt

Lattice Semiconductor LC4384V-5T176C is a 384-macrocell SuperFAST complex programmable logic device with a 5 ns pin-to-pin delay, operating from a 3.3 V supply in a 176-pin LQFP package. It combines programmable logic density, in-system programmability, and a high-performance 400 MHz architecture for deterministic control, interface, and signal-conditioning designs.

A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines multiple programmable logic blocks with a fixed interconnect structure. A CPLD occupies a practical position between simple programmable logic arrays and larger field-programmable gate arrays. Its deterministic timing, reusable configuration mechanism, and relatively compact I/O structure make it useful for control logic, bus arbitration, protocol bridging, address decoding, and system-level glue logic.

The LC4384V-5T176C provides 384 macrocells, a 5 ns nominal pin-to-pin delay, and operation up to 400 MHz. Its 176-pin package provides 144 user I/O pins according to the device description, while a 0.5 mm pitch supports dense board layouts. In-system programming allows the same board design to be configured for multiple product variants or revised during production without changing the PCB.

The device belongs to Lattice's ispMACH 4000 family, which blends the architectures of the ispLSI 2000 and ispMACH 4A families. This architecture supports reusable logic blocks, programmable interconnect, and high-speed operation. Compared with discrete programmable logic arrays, the integrated macrocell and routing structure reduces the number of packages required for moderate logic-density designs.

Typical uses include industrial control and automation, communication-interface logic, test-and-measurement equipment, embedded system control, data acquisition, and general-purpose glue logic. The 176-pin package is particularly suitable when a design needs more I/O than a small CPLD while retaining deterministic programmable logic rather than using a large FPGA.

PCB planning should preserve access to all configuration and programming pins, provide clean power and ground distribution, and follow the manufacturer's footprint and decoupling recommendations. Because the -5 speed grade differs from slower or faster family options, timing constraints and acquisition paths must be reviewed before substituting another grade into an existing design.

This product page combines the device's logic density, timing, package characteristics, drop-in family alternatives, and application-oriented engineering guidance to help engineers identify whether the LC4384V-5T176C matches the required footprint, speed grade, interface count, and deterministic control architecture.

Bộ thay thế dễ dàng lắp đặt cho LC4384V-5T176C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4384V-5T176C (cùng hình factor và footprint) — khác nhau ở Device Type, Mounting Type, Package, Product Family.

Lattice Semiconductor
Device Type: SuperFAST high-density complex programmable logic device (CPLD)
So sánh với LC4384V-5T176C →
Lattice Semiconductor
Package: 176-pin LQFP
Product Family: LC4384C Super Fast High Density PLD
So sánh với LC4384V-5T176C →
Lattice Semiconductor
Device Type: In-system-programmable high-density complex programmable logic device
Mounting Type: Surface-mount
So sánh với LC4384V-5T176C →

LC4384V-5TN176C

✅ Drop-In
📦 LQFP-176
Same 176-pin LQFP footprint and 5 ns speed class; ordering suffixes may indicate different temperature, packing, or qualification attributes, a 0% speed difference.

📋 Tham chiếu thay thế (không có trong danh mục)

LC4384V-35TN176C

✅ Drop-In
📦 LQFP-176
Same 176-pin LQFP footprint with a 3.5 ns speed class versus 5 ns, improving the stated delay by 1.5 ns or 30%.

📋 Tham chiếu thay thế (không có trong danh mục)

LC4384V-75TN176C

✅ Drop-In
📦 LQFP-176
Same 176-pin LQFP footprint with a 7.5 ns speed class versus 5 ns, increasing the stated delay by 2.5 ns or 50%.

📋 Tham chiếu thay thế (không có trong danh mục)

LC4384V-75T176I

✅ Drop-In
📦 LQFP-176
Same 176-pin LQFP footprint with a 7.5 ns speed class versus 5 ns, increasing the stated delay by 2.5 ns or 50%, with an industrial suffix.

📋 Tham chiếu thay thế (không có trong danh mục)

LC4384V-10TN176I

✅ Drop-In
📦 LQFP-176
Same 176-pin LQFP footprint with a 10 ns speed class versus 5 ns, increasing the stated delay by 5 ns or 100%.

📋 Tham chiếu thay thế (không có trong danh mục)

LC4384V-5T176C Tỷ lệ tối đa & tính chất điện

Device Type Complex programmable logic device (CPLD)
Product Family ispMACH 4000
Macrocell Count 384 macrocells
Maximum Operating Frequency 400 MHz
Pin-to-Pin Delay 5 ns
Điện áp cung cấp 3.3 V
User I/O Count 144 I/O pins
Total Terminal Count 176 pins
Hộp LQFP-176
Package Body Size 21 mm square
Package Pitch 0.5 mm
Kiểu lắp đặt Surface mount
Programming In-system programmable
Performance Class SuperFAST high-density PLD

Hướng dẫn cấu hình chân LC4384V-5T176C 0.5 mm

Cấu hình chân cho LC4384V-5T176C (0.5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 0.5 mm cho LC4384V-5T176C

Không có dữ liệu chân cụ thể sẵn có cho LC4384V-5T176C.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LC4384V-5T176C phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Communication Interface Logic, Data Acquisition and Signal Conditioning, Test and Measurement Equipment, Embedded System Glue Logic, LED and Display Control.

🏭

Industrial Control and Automation

The LC4384V-5T176C fits deterministic industrial control logic that needs substantial I/O without moving to a large FPGA. Its 384 macrocells can organize sequencing, state-machine, interlock, and data-routing functions, while the 5 ns delay supports timing margins around the 400 MHz device class. The 176-pin LQFP exposes 144 user I/O pins for sensors, actuators, interlocks, and field-bus interfaces. Validate timing against the selected -5 grade, keep configuration circuitry accessible for in-system programming, and use the manufacturer footprint and decoupling guidance when laying out the control board.

🌐

Communication Interface Logic

The LC4384V-5T176C is appropriate for fixed-format protocol bridging, framing, parity generation, and bus arbitration where deterministic response is more important than software-managed flexibility. A 5 ns pin-to-pin delay and 400 MHz operating class provide useful margin for synchronous receive and transmit logic, while 144 user I/O pins permit multiple parallel interfaces. Place the CPLD close to related connectors and transceivers, route clocks according to the manufacturer's recommendations, and analyze setup and hold requirements for every interface crossing the programmable-logic boundary.

📊

Data Acquisition and Signal Conditioning

The LC4384V-5T176C can implement acquisition sequencing, channel selection, trigger conditioning, and digital preprocessing around mixed-signal circuits. The device provides 384 macrocells and 144 user I/O pins for parallel ADC interfaces, capture control, and status multiplexing, while the 5 ns delay supports deterministic timing chains. Keep analog and digital return paths separated, use a stable clock source, and place decoupling and routing structures close to the CPLD. Confirm acquisition-edge timing against the selected I/O standard and external component delays.

🖥️

Test and Measurement Equipment

The LC4384V-5T176C suits bench instruments and automated test systems requiring flexible control, measurement sequencing, and reconfigurable interface logic. Its 384 macrocells support counters, timing states, instrument control, and data-format conversion, while the 176-pin package provides enough connections for front-panel controls, status buses, and measurement peripherals. The in-system programming capability allows configuration revisions and product-family consolidation. Apply short clock routes, maintain solid return paths, and verify timing margins across instrument-control and acquisition domains.

🔧

Embedded System Glue Logic

The LC4384V-5T176C is useful when a processor-based design still requires dedicated glue logic for address decoding, interrupt control, peripheral selection, or legacy interface adaptation. The 384-macrocell CPLD can consolidate several discrete logic devices, and the 5 ns speed class supports fast peripheral selection. Its in-system programming makes it practical to update control logic independently of the host processor. Use the manufacturer pin-assignment table, isolate programming signals where required, and review the device's I/O and timing characteristics against the processor and connected peripherals.

💡

LED and Display Control

The LC4384V-5T176C can generate display timing, character or pixel sequencing, multiplexing control, and backlight-enable logic in LED-oriented equipment. Its 144 user I/O pins provide parallel control capacity, and the 5 ns timing class enables short deterministic delays in scan or refresh sequences. Keep repetitive outputs physically close to their associated connectors and drivers to reduce switching noise and skew. Verify voltage compatibility, output-drive requirements, and timing relationships to the display controller before finalizing the PCB.

What is the Lattice Semiconductor LC4384V-5T176C?
The LC4384V-5T176C is a 384-macrocell ispMACH 4000 complex programmable logic device with a 5 ns pin-to-pin delay and 400 MHz maximum operating frequency. It is supplied in a 176-pin LQFP package for deterministic, high-speed programmable logic. According to the manufacturer datasheet, the family combines the architectural characteristics of the ispLSI 2000 and ispMACH 4A families.
What are the key specifications of LC4384V-5T176C that engineers should know?
The LC4384V-5T176C combines 384 macrocells, 144 user I/O pins, a 5 ns pin-to-pin delay, and operation up to 400 MHz in a 176-pin LQFP package. The manufacturer identifies it as a 3.3 V SuperFAST high-density PLD with in-system programming. These figures place it between small CPLDs and larger FPGAs for designs requiring substantial I/O and deterministic logic timing.
Where can I download the LC4384V-5T176C datasheet PDF?
The LC4384V-5T176C datasheet PDF is available from the manufacturer-data link listed on this page. It documents the ispMACH 4000 architecture, electrical characteristics, package information, pin assignments, and programming guidance. Use the manufacturer datasheet as the controlling document for PCB pin assignments, power sequencing, timing constraints, and configuration requirements.
Where can I find the LC4384V-5T176C pinout?
The LC4384V-5T176C pinout is defined in the manufacturer's ispMACH 4000 datasheet under the 176-pin LQFP package information. The device has 176 terminals in a 0.5 mm-pitch LQFP package, including user I/O, power, ground, clock, configuration, and programming functions. Assign PCB tracks from the pin-description table rather than inferring unused or dedicated pins from adjacent devices.
What can replace the LC4384V-5T176C?
The closest family alternatives include LC4384V-5TN176C, LC4384V-75TN176C, LC4384V-35TN176C, LC4384V-10TN176I, and LC4384V-75T176I. Each uses the same 176-pin LQFP footprint, but the speed grade, temperature grade, or suffix can change timing and operating conditions. Confirm the required tPD, maximum frequency, temperature range, and power-supply details before replacement.
Is LC4384V-5T176C the same as LC4384V-5TN176C?
LC4384V-5T176C and LC4384V-5TN176C both identify a 5 ns, 176-pin LQFP device, but the suffix and ordering code may indicate different temperature, packing, or qualification attributes. The LC4384V-5TN176C is therefore the strongest same-footprint family candidate, subject to confirmation of the exact ordering-code fields and temperature grade in the manufacturer documentation.
LC4384V-5T176C vs LC4384V-75T176C — which is better for timing-critical logic?
The LC4384V-5T176C is the better choice when the design requires the shorter 5 ns speed grade, while the LC4384V-75T176C provides a slower 7.5 ns class. Both use a 176-pin LQFP footprint, so the comparison is primarily about timing and operating grade rather than PCB compatibility. Review worst-case timing and acquisition paths for the selected grade.
When should I choose LC4384V-5T176C over a slower LC4384V grade?
Choose LC4384V-5T176C when external interface timing cannot tolerate the approximately 7.5 ns or 10 ns delay associated with slower alternatives. Its 5 ns pin-to-pin delay and 400 MHz operating class provide additional timing margin for synchronous control, arbitration, and interface logic. A slower grade may still be appropriate when the target frequency is modest or power and availability considerations dominate.
Is LC4384V-5T176C suitable for industrial control applications?
The LC4384V-5T176C is suitable for deterministic industrial control logic requiring 384 macrocells and 144 user I/O pins. Its in-system programming supports design reuse, configuration updates, and production flexibility. For deployed equipment, confirm the selected ordering code's operating-temperature grade and current availability, then validate the complete industrial control timing and environmental requirements.
How much power does the LC4384V-5T176C consume?
The LC4384V-5T176C consumes power according to its active configuration, I/O activity, supply voltage, and operating frequency. The manufacturer datasheet provides the authoritative static and dynamic power characteristics for the 3.3 V device. For thermal design, calculate worst-case dissipation from the selected I/O activity and include local power-plane and via arrangements that preserve the required junction-temperature margin.
Where can I buy LC4384V-5T176C and what is its lead time?
Use the Request a Quote form on this page to request LC4384V-5T176C pricing, stock confirmation, minimum order quantity, and current lead time. Quote requests establish the exact ordering code, delivery quantity, and shipping conditions needed for procurement. The current commercial status should be confirmed through the same channel before committing the component to a production schedule.
What is the price of LC4384V-5T176C?
Current LC4384V-5T176C commercial pricing is handled through the Request a Quote form on this page. Enter the required quantity, target delivery date, and exact MPN so procurement can provide a current quotation and availability confirmation. The form avoids publishing a static unit figure that may not reflect quantity breaks, market conditions, or the requested delivery schedule.
Is LC4384V-5T176C currently in stock?
Current stock for LC4384V-5T176C should be confirmed through the Request a Quote form on this page. Stock status can change with the requested quantity and packing option, so a confirmed allocation is more useful than a generic availability statement. Include your production schedule and forecast quantity to obtain a practical supply response.
What is the best Lattice Semiconductor equivalent for LC4384V-5T176C?
The best same-brand equivalent is LC4384V-5TN176C because it retains the 176-pin LQFP footprint and 5 ns timing class. Other same-footprint options differ in speed grade or temperature suffix, so they are valid only when the lower timing performance remains acceptable. No cross-brand drop-in equivalent is established here; validate programming file compatibility, pin behavior, and timing rather than relying only on package match.
Does LC4384V-5T176C support in-system programming?
Yes, the LC4384V-5T176C belongs to the in-system programmable ispMACH 4000 family. In-system programming allows the logic configuration to be loaded or revised through the device's dedicated programming interface without removing the package from the assembled PCB. The designer must still follow the manufacturer's programming-voltage, timing, isolation, and pin-assignment requirements during implementation.

Dữ liệu tham khảo kỹ thuật cho LC4384V-5T176C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LC4384V-5T176C when the board uses a 176-pin LQFP footprint, the design requires a 384-macrocell CPLD, and a 5 ns timing class is appropriate for the critical paths. LC4384V-5TN176C is the closest family candidate because it preserves the same footprint and stated speed class; confirm the remaining ordering-code attributes before substitution. Consider LC4384V-35TN176C when additional timing margin is valuable and its electrical and configuration behavior remains compatible. Use LC4384V-75TN176C or LC4384V-75T176I only when the slower 7.5 ns class still satisfies every acquisition path and the industrial suffix is acceptable. LC4384V-10TN176I is appropriate for lower-speed designs with sufficient timing margin. No cross-brand drop-in candidate is established because package similarity alone does not ensure pin behavior, programming compatibility, or system-level timing equivalence.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LC4384V-5TN176C LC4384V-35TN176C LC4384V-75TN176C LC4384V-75T176I LC4384V-10TN176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package LQFP-176 LQFP-176 LQFP-176 LQFP-176 LQFP-176 LQFP-176
Device Type 384-macrocell CPLD CPLD CPLD CPLD CPLD CPLD
Pin-to-Pin Delay 5 ns 5 ns 3.5 ns 7.5 ns 7.5 ns 10 ns
Total Terminal Count 176 pins 176 pins 176 pins 176 pins 176 pins 176 pins
Performance Class SuperFAST high-density PLD SuperFAST high-density PLD SuperFAST high-density PLD SuperFAST high-density PLD SuperFAST high-density PLD SuperFAST high-density PLD

Bảo phân biệt quan trọng

  • Faster timing class than the 7.5 ns alternatives (vsLC4384V-75TN176C)
  • Faster timing class than the 10 ns alternative (vsLC4384V-10TN176I)
  • Same 176-pin footprint as the 3.5 ns option (vsLC4384V-35TN176C)

Ghi chú thiết kế

Assign the PCB footprint directly from the manufacturer's 176-pin LQFP drawing, including the 0.5 mm pitch and 21 mm square body. Preserve clearance around all package leads and provide unobstructed access to programming or configuration pins. Because all listed alternatives use the same 176-pin family footprint, verify lead numbering, exposed connections, and programming-interface compatibility in the manufacturer pin table before releasing the layout.

Build the power distribution around the manufacturer's 3.3 V requirements and place the required bypass capacitors close to the associated supply and ground pins. Use short, wide supply paths and an uninterrupted ground reference to limit transient impedance. Confirm the actual decoupling network, allowable voltage range, and programming-supply sequence in the family datasheet rather than copying a generic CPLD power arrangement.

Route clocks and high-speed interfaces with controlled impedance, short return paths, and no unnecessary stubs. The 5 ns pin-to-pin delay does not guarantee system timing by itself: include external setup time, hold time, clock skew, interconnect delay, and I/O standard transitions in the timing budget. Validate every acquisition path with the actual tool version and constraints used for the design.

Do not treat a shared LQFP-176 outline as proof that every family suffix is interchangeable. Speed-grade changes can invalidate a synchronous design, while the final suffix may identify temperature, qualification, packing, or other ordering attributes. Before substituting LC4384V-5TN176C, LC4384V-35TN176C, LC4384V-75TN176C, LC4384V-75T176I, or LC4384V-10TN176I, compare the complete ordering code and rerun timing and power checks.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is present in the cited product information. Confirm the current compliance status using the exact manufacturer ordering code before procurement.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lattice lc4384v LC4384V-5T176C datasheet LC4384V-5T176C datasheet pdf LC4384V-5T176C pinout LC4384V-5T176C specifications LC4384V-5T176C equivalent LC4384V-5T176C replacement LC4384V-5T176C cross reference LC4384V-5T176C vs LC4384V-75TN176C LC4384V-5T176C footprint LC4384V-5T176C application circuit LC4384V-5T176C price LC4384V-5T176C stock 384 macrocell 176 pin CPLD Lattice 400 MHz 5 ns CPLD

Các bộ phận và thuật ngữ liên quan

Lattice Semiconductor LC4384V-5T176C LC4384V-5TN176C LC4384V-35TN176C LC4384V-75TN176C LC4384V-75T176I LC4384V-10TN176I ispMACH 4000 ispLSI 2000 ispMACH 4A complex programmable logic device CPLD programmable logic device field-programmable gate array FPGA 384 macrocells SuperFAST in-system programming pin-to-pin delay maximum operating frequency 3.3 V power supply 176-pin LQFP 0.5 mm package pitch deterministic logic RoHS REACH AEC-Q100
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ