LM2904M - Dual 26V 700kHz Op Amp | Texas Instruments
MPN: LM2904M ✓ Hoạt độngLM2904M Tóm tắt
An operational amplifier is an analog integrated circuit that uses feedback to amplify the difference between its non-inverting and inverting inputs. The LM2904M belongs to the broader operational-amplifier, analog-amplifier, and semiconductor hierarchies. In practical circuits, each internal amplifier can serve as an inverting amplifier, non-inverting amplifier, comparator, buffer, or integrator when operated with suitable external components and supply voltages.
The 26 V supply rating provides compatibility with conventional industrial and analog signal ranges, while the 700 kHz gain-bandwidth product supports low-to-moderate-frequency signal amplification. The dual configuration reduces package count when a circuit needs two amplifier channels. Its general-purpose designation indicates broad applicability rather than a specialized low-noise, high-speed, precision, or automotive-only function.
The LM2904M uses an 8-SOIC surface-mount package, corresponding to the soic-8 package library key. The verified results do not provide a complete electrical specification table in the supplied excerpts, so detailed parameters such as input offset voltage, input bias current, slew rate, output-current capability, common-mode range, quiescent current, and noise values are marked as data needed rather than estimated.
Typical applications include low-frequency analog signal conditioning, instrumentation interfaces, sensor buffers, audio preamplifier stages, and general dual-amplifier circuits. The dual channel can also be used for active filtering or control loops where two matched functional amplifier sections are useful. Because the available information is general-purpose and distributor-oriented, the designer should verify operating-point limits, loading, stability, and temperature margin against the manufacturer datasheet before release.
For PCB implementation, place bypass capacitors close to the supply pins and route sensitive input and feedback traces away from switching nodes and high-current paths. Confirm the exact pin orientation and electrical limits before assembly. This page combines verified manufacturer and distributor references with explicitly marked data gaps rather than inventing missing specifications.
Bộ thay thế dễ dàng lắp đặt cho LM2904M — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2904M (cùng hình factor và footprint) — khác nhau ở Package, Amplifier Type, Number of Channels, Operating Temperature Range, RoHS Status.
LM2904M/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
KA2904
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LM2904D
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2904M Tỷ lệ tối đa & tính chất điện
| Product Type | Dual general-purpose operational amplifier |
| Number of Amplifier Channels | 2 circuits |
| Supply Voltage Rating | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| Hộp | 8-SOIC |
| Khoảng nhiệt độ hoạt động | -40 °C to 85 °C |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân LM2904M 8-soic
Cấu hình chân cho LM2904M (8-soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM2904M.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM2904M phù hợp cho 6 Áp dụngs: Low-Frequency Sensor Signal Conditioning, Audio Preamplifier, Active Filter and Filter Buffer, Instrumentation Interface, Industrial Control Signal Conditioning, General Analog Buffering.
Low-Frequency Sensor Signal Conditioning
The LM2904M is suitable for conditioning low-frequency sensor signals when the circuit does not require the very low offset, noise, and bias-current performance of a precision amplifier. Its two channels can be assigned to separate stages, such as an amplifier followed by a buffer or an active-filter section. The verified 700 kHz gain-bandwidth product is appropriate for many low-frequency industrial signals, while the 26 V rating supports conventional analog supply planning. Before committing, verify input bias current for high-impedance sensors, common-mode limits, output swing, and the required signal bandwidth.
Được đề xuất
Audio Preamplifier
The LM2904M can support general audio preamplifier and buffering functions when the desired gain and bandwidth remain within the device’s operating limits. A dual package allows one channel to provide voltage gain and the other to buffer or implement a second gain stage. Its 700 kHz gain-bandwidth product covers many audio-band applications, but the designer should check slew rate, output swing, noise, load capability, and supply voltage in the manufacturer datasheet. Decoupling and grounding are especially important when the amplifier follows a high-gain stage.
Được đề xuất
Active Filter and Filter Buffer
The dual LM2904M is useful for active-filter and buffering circuits where two amplifier channels can simplify the signal path. One channel may implement a first- or second-order active-filter section while the other isolates the next stage or provides gain. The 700 kHz gain-bandwidth product gives useful bandwidth for many low- and mid-frequency filter designs, while the 26 V rating provides supply flexibility. Exact resistor, capacitor, noise, stability, and common-mode selections must be calculated using the verified electrical characteristics.
Được đề xuất
Instrumentation Interface
LM2904M can be used in instrumentation interfaces for low-frequency differential or single-ended signal paths where general-purpose performance is sufficient. The two amplifier sections can form a differential stage, an input buffer plus gain stage, or a gain-and-buffer combination. Its dual 26 V and 700 kHz family positioning supports many industrial control and measurement circuits, but high-impedance sources may require careful assessment of bias current and offset. Verify the actual input range and output drive before selecting the supply rails.
Được đề xuất
Industrial Control Signal Conditioning
The LM2904M is applicable to industrial control signal-conditioning circuits that operate at low or moderate frequencies and need two general-purpose amplifier channels. It can condition control feedback signals, buffer sensor outputs, or amplify a low-level command before an actuator interface. The 26 V rating is useful for systems with wider analog rails, but the exact common-mode range and output swing must be confirmed for the chosen operating point. Robust grounding, supply bypass capacitors, and protection against transients remain necessary for industrial boards.
Được đề xuất
General Analog Buffering
The LM2904M can function as a general analog buffer or unity-gain stage for low- to moderate-bandwidth signals. Buffering can reduce source-loading effects when driving a following circuit, and the second channel may handle an independent signal path. The 700 kHz gain-bandwidth product should be checked against the required closed-loop bandwidth and stability margins. The verified data does not specify unity-gain bandwidth, output-current capability, or slew rate, so the final selection must be based on the complete manufacturer datasheet.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM2904M — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LM2904M/NOPB | KA2904 | LM2904D |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | onsemi | Texas Instruments |
Bảo phân biệt quan trọng
- Two amplifier channels in one package (vsKA2904)
- 26 V family supply rating (vsLM2904M/NOPB)
- 700 kHz gain-bandwidth positioning (vsLM2904D)
Ghi chú thiết kế
The verified LM2904 family information gives a 26 V rating but does not provide the complete supply-current or thermal limits in the supplied excerpts. Before applying power, confirm the minimum and maximum supply voltage, input common-mode range, output swing, quiescent current, and package thermal limits from the manufacturer datasheet. Place supply bypass capacitors close to the amplifier supply pins and keep the return path short to reduce supply noise and ground bounce.
Use the manufacturer 8-SOIC land pattern and confirm pin 1 orientation before routing. Keep non-inverting and inverting inputs, feedback components, and high-impedance nodes short and away from switching inductors, motor traces, and digital clock lines. A solid ground plane helps return currents, but sensitive analog traces should still be routed over a continuous, low-impedance ground reference.
Do not substitute an LM2904-family part based only on its name or apparent pin compatibility. The verified excerpts do not provide a complete pinout, electrical limit table, or quantified cross-reference matrix. Before replacing LM2904M, compare supply voltage, input common-mode range, offset voltage, bias current, gain-bandwidth behavior, slew rate, output swing, load capability, temperature grade, and package drawing against the exact replacement datasheet.
For feedback and filter circuits, calculate closed-loop bandwidth from the verified device behavior and the selected noise-gain network rather than relying only on the 700 kHz headline gain-bandwidth value. Keep feedback components close to the relevant pins and avoid long traces around high-gain nodes. Verify stability, slew-rate limits, and output loading in the manufacturer datasheet before increasing gain or operating frequency.
Thông tin tuân thủ
The supplied verified excerpts identify the distributor categories and manufacturer product page but do not provide RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declarations for the exact LM2904M suffix. These fields remain unknown rather than inferred.
