LM393ADT - Dual Open-Collector Comparator | STMicroelectronics
MPN: LM393ADT ✓ Hoạt độngLM393ADT Tóm tắt
A comparator is a semiconductor device that compares two input voltages and produces a logic-level result indicating which input is higher. The dual-comparator architecture places two independent channels in one package, reducing component count when a system performs two related threshold decisions. As a general-purpose comparator, the LM393ADT belongs to the broader voltage-comparison and signal-conditioning hierarchy rather than to an amplifier, converter, or regulator product class.
The principal features of the LM393ADT are its two independent comparator channels, rail-to-rail input operation, open-collector outputs, and compatibility with both single and split power-supply arrangements. Open-collector outputs provide a useful pull-up interface for wired logic, level translation, and systems requiring an external pull-up resistor. Because the output transistor is exposed rather than driven by an internal totem-pole stage, circuit designers can select the pull-up voltage independently of the comparator supply in many applications.
Internally, the two channels operate independently, allowing each comparator to monitor a different signal pair. This architecture supports two separate threshold decisions without shared input multiplexing. Rail-to-rail input behavior makes the input common-mode range an important design consideration, while the open-collector output requires an external pull-up in normal open-drain operation. The 8-SOIC package provides a conventional surface-mount footprint for PCB assembly and hand rework.
Typical uses include industrial control and threshold detection, battery and power-supply monitoring, sensor signal conditioning, comparator-based oscillator circuits, window detection, and general logic interfacing. The part can also serve as the decision element in systems that convert an analog voltage into a digital state. Its dual-channel organization is particularly useful when two monitored quantities must produce separate logic outputs.
When designing a board around the LM393ADT, reserve a pull-up resistor for each open-collector output and keep the pull-up voltage compatible with the receiving logic. Review input common-mode limits, output rise and fall behavior, supply decoupling, and the voltage relationship between input signals and supply rails. Account for input signals that can approach the supply rails when sizing protection or biasing networks.
This page combines the verified LM393ADT product identity, package and functional characteristics with compatible comparator references and practical design guidance. It also organizes replacement, selection, sourcing, datasheet, and application questions into concise engineering answers for faster component evaluation.
Bộ thay thế dễ dàng lắp đặt cho LM393ADT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM393ADT (cùng hình factor và footprint) — khác nhau ở Comparator Type, Output Type, Package, Operating Temperature Range.
TS393CD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LMV393
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LM393AD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM393LV
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LM393AD
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM393ADT Tỷ lệ tối đa & tính chất điện
| Comparator Type | General-purpose dual differential comparator |
| Number of Channels | 2 channels |
| Channel Independence | 2 independent channels |
| Input Common-Mode Range | Rail-to-rail |
| Kiểu đầu ra | Open-collector |
| Supply Configuration | Single supply or split supply |
| Hộp | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tape and reel |
Hướng dẫn cấu hình chân LM393ADT 8-pin soic
Cấu hình chân cho LM393ADT (8-pin soic gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM393ADT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM393ADT phù hợp cho 6 Áp dụngs: Industrial Sensor Threshold Detection, Battery Power-Supply Monitoring, Window Comparator Control, Comparator-Based Oscillator, Logic-Level Signal Interface, Automotive and Equipment Fault Detection.
Industrial Sensor Threshold Detection
The LM393ADT fits industrial sensor-interface designs that require a compact decision stage between an analog sensor signal and digital control circuitry. Its two independent comparator channels can monitor two sensed quantities against reference thresholds, while the rail-to-rail input characteristic is useful when valid sensor signals occupy much of the low-voltage supply range. Each open-collector output can drive a controller input through a pull-up resistor, or indicate an over-limit, under-limit, or fault condition. Because open-collector outputs can be pulled up to a logic-compatible voltage, the interface can bridge different domains within the equipment. Design protection against transients and out-of-range sensor inputs, and verify the exact common-mode limits in the manufacturer datasheet before applying the thresholds.
Được đề xuất
Battery Power-Supply Monitoring
The LM393ADT is appropriate for battery-powered systems that need to identify voltage thresholds without relying on an ADC. Two independent channels can provide separate indications for undervoltage and overvoltage conditions, such as a low-battery warning and a charge-completion or overvoltage signal. The open-collector outputs simplify connection to a microcontroller input because an external pull-up establishes the logic high level. Rail-to-rail input operation supports sensing near the available supply range, although the design must remain within the comparator's detailed input and supply limits. Account for battery chemistry, tolerances, transient excursions, and the pull-up current drawn while an output remains low. Firmware can debounce threshold transitions, but comparator hysteresis should also be considered where noisy inputs could repeatedly cross the decision boundary.
Được đề xuất
Window Comparator Control
The LM393ADT is well suited to window detection because it contains two independent comparators that can evaluate upper and lower limits of a monitored voltage. One channel can detect when the signal falls below a lower reference, while the second detects when it rises above an upper reference, allowing a controller to distinguish normal, low, and high operating states. The open-collector outputs can be pulled up independently or combined depending on the required system behavior. Reference generation should use stable sources and suitable filtering, and the two thresholds should include practical hysteresis to prevent chatter around each limit. Rail-to-rail inputs can make the arrangement convenient in compact low-voltage equipment, but the actual input common-mode range and supply requirements must be confirmed before finalizing the analog network.
Được đề xuất
Comparator-Based Oscillator
The LM393ADT can form the decision element of a relaxation oscillator by charging and discharging a timing capacitor and comparing the capacitor voltage with a feedback threshold. Its two channels allow the timing and output functions to be implemented with a compact dual-comparator arrangement. The open-collector output is valuable in this topology because it can directly discharge the timing capacitor when the conducting channel pulls the node low. Frequency depends on the resistor-capacitor network, hysteresis, propagation delay, and output saturation behavior, so the timing calculation must be validated across temperature and supply tolerance. Keep the timing capacitor close to the comparator input to reduce parasitic coupling, and use a pull-up resistor that establishes the desired high timing voltage without exceeding the output and supply ratings.
Được đề xuất
Logic-Level Signal Interface
The LM393ADT can bridge an analog or voltage-domain signal into a digital system whose logic high differs from the comparator supply. Each open-collector output is connected to a pull-up resistor, allowing the high-state voltage to be selected independently of the comparator supply when the electrical limits permit it. This is useful in mixed-voltage equipment, test fixtures, and control boards where a sensor, switch, or level-shift stage produces a voltage that must become a valid logic input. Two channels support two interface points on a compact board. The design should verify input thresholds, output sink current, pull-up current, rise time, and maximum output voltage for the selected logic family. Adding a series resistor or protection network can limit fault current if the external connector exposes the node to ESD or accidental short circuits.
Được đề xuất
Automotive and Equipment Fault Detection
The LM393ADT can support fault detection in industrial, automotive-adjacent, and general equipment designs by comparing monitored voltages with defined limits. One channel may detect an abnormal low condition and the other an abnormal high condition, enabling a controller to identify sensor failure, rail excursion, or an out-of-range actuator command. Rail-to-rail inputs support compact low-voltage systems, while the open-collector output provides a simple way to signal a fault to another logic block. For automotive use, do not assume qualification from the basic device name; confirm AEC-Q100 status, temperature grade, vibration, transient immunity, and supplier traceability in the exact manufacturer documentation. Protect external wiring against automotive transients and use filtering or hysteresis to prevent repeated fault assertions from electrically noisy sensors.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM393ADT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TS393 | LMV393 | LM393AD | LM393LV | LM393AD |
|---|---|---|---|---|---|---|
| Package | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 | SOIC-8 |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | Texas Instruments | Texas Instruments | NXP Semiconductors |
| Comparator Configuration | Dual differential comparator with 2 independent channels | Dual comparator | Dual comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
Bảo phân biệt quan trọng
- Provides two independent comparisons in one compact package (vsTS393)
- Supports single- and split-supply system architectures (vsLMV393)
- Rail-to-rail inputs support wide signal-range comparison (vsLM393LV)
Ghi chú thiết kế
Treat every LM393ADT output as an open-collector node rather than a push-pull logic output. Fit one pull-up resistor to each channel unless the circuit intentionally combines outputs. Select the pull-up voltage so it remains within the comparator's permitted output voltage and remains compatible with the receiver. Remember that the pull-up contributes continuous current whenever an output transistor is conducting, so select its resistance from both the sink-current limit and the required output rise time.
Place the comparator input traces away from switching nodes, high-current rails, and the open-collector output return path when noise-sensitive thresholds are involved. Keep the input and reference components close to their corresponding pins to minimize parasitic coupling and propagation delay. Use a ground reference that remains stable under the system's switching load, and route the pull-up resistor close to the output pin to minimize distributed capacitance when a faster rising edge is required.
Add intentional hysteresis when the compared signals can cross slowly or exhibit noise near the threshold. Positive feedback from output to the appropriate input creates a controlled switching margin, but the feedback amount must be checked against the input and output limits. For battery or sensor monitoring, combine hysteresis with supply filtering and verify behavior across the full temperature range; a static threshold that works on the bench can chatter in the final enclosure.
Decouple the comparator supply near the device with a short, low-impedance connection to the ground plane. The exact capacitor value and dielectric should follow the manufacturer recommendation and the impedance of the surrounding circuit. When using split supplies, establish a defined reference for the comparator inputs and outputs rather than allowing a floating input to move unpredictably. Confirm that all pull-up and output paths remain within the selected supply configuration.
Thông tin tuân thủ
Compliance declarations were not included in the retrieved product summaries. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status for the exact STMicroelectronics ordering code and production packaging.