LMR824F-GE2 - Low-Power Rail-to-Rail Op Amp | ROHM
MPN: LMR824F-GE2 ✓ Hoạt độngLMR824F-GE2 Tóm tắt
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The LMR824F belongs to the broader operational-amplifier and signal-conditioning hierarchy, where four independent channels can implement buffering, gain stages, filters, transducers, and analog signal processing. The quad-amplifier arrangement reduces package count and simplifies common supply routing compared with four separate single-channel devices.
The LMR824F family emphasizes low operating supply current, high voltage gain, high slew rate, and output full-swing capability. Its 2.5 V to 5.5 V supply range supports systems operating from a single low-voltage rail. The four-channel configuration is particularly useful when a design requires several matched functional stages, although matching performance between channels should be evaluated from the manufacturer datasheet when precision ratios, offsets, or drift are critical.
ROHM describes the LMR824F as a low-voltage, low-current, full-swing operational amplifier with high voltage gain and high slew rate. Its output can approach the supply rails, making it useful in low-voltage circuits where conventional fixed-output amplifiers would leave insufficient signal headroom. Because the four amplifiers share one package, supply bypassing and package-level thermal considerations affect every channel, including channels that are lightly loaded.
Typical uses include mobile-equipment signal chains, active analog filters, sensor interfaces, low-voltage audio paths, transducer amplifiers, and general-purpose instrumentation. In a mobile design, the amplifier can buffer sensors or amplify low-level signals while operating directly from a low-voltage rail. In an active-filter implementation, its output swing helps preserve filter amplitude, while the quad format can provide multiple filter or buffer stages with shared supply routing.
When laying out the circuit, place the supply-decoupling capacitor close to the positive and ground pins and keep sensitive input traces away from switching nodes and high-current return paths. Confirm the required input common-mode range, output swing, load current, stability, and noise performance for the selected feedback network. The manufacturer datasheet should be used for the exact pin assignment, electrical limits, recommended application circuit, and compensation guidance.
This page combines the LMR824F-GE2 product characteristics, commercial sourcing path, package information, application guidance, and design considerations in one engineering-focused reference. It is intended to help designers identify the correct amplifier function, plan a pin-compatible assembly strategy, and evaluate the LMR824F-GE2 for compact low-voltage analog systems.
Bộ thay thế dễ dàng lắp đặt cho LMR824F-GE2 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LMR824F-GE2 (cùng hình factor và footprint) — khác nhau ở Package.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếLMR824F-GE2 Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Single-supply operational amplifier |
| Number of Channels | 4 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Supply Current per Channel | 26 mA |
| Input Bias Current | 30 nA |
| Output Topology | Rail-to-rail, full-swing output |
| Hộp | 14-SOIC, 4.40 mm body width |
| Kiểu lắp đặt | Surface mount |
| Supplier Device Package | 14-SOP |
| Delivery Format | Tape and reel |
Hướng dẫn cấu hình chân LMR824F-GE2 14-sop
Cấu hình chân cho LMR824F-GE2 (14-sop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LMR824F-GE2.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LMR824F-GE2 phù hợp cho 6 Áp dụngs: Mobile Equipment Signal Conditioning, Active Analog Filters, Low-Voltage Sensor Interfaces, Audio Signal Paths, Instrumentation Signal Conditioning, Industrial Low-Voltage Control Circuits.
Mobile Equipment Signal Conditioning
The LMR824F-GE2 fits mobile-equipment signal conditioning because it combines four amplifier circuits with a 2.5 V to 5.5 V operating range. A designer can use the channels to buffer sensors, amplify low-level analog signals, and provide interface gain without introducing multiple package footprints. ROHM specifically identifies mobile equipment and low-voltage applications as suitable uses for the family. The full-swing output helps retain amplitude when operating close to the supply rails, although input common-mode range, noise, and stable feedback-network requirements must be checked against the application. Its four-channel 14-SOIC arrangement also simplifies common supply routing while reducing the number of separate amplifier packages on a compact board.
Được đề xuất
Active Analog Filters
The LMR824F-GE2 is well suited to active-filter implementations because the LMR824F family combines high voltage gain with high slew rate and full-swing output. Multiple channels can form Sallen-Key or state-variable filter sections, while the 2.5 V to 5.5 V supply range supports low-voltage analog systems. Output swing is important in filters with limited headroom because it determines how closely the waveform can approach the supply rails. Component tolerances, capacitor selection, amplifier stability, and the gain-bandwidth requirement remain central to achieving the intended response. Four amplifiers in one 14-SOIC package reduce routing and footprint demands when several filter stages are needed.
Được đề xuất
Low-Voltage Sensor Interfaces
The LMR824F-GE2 can provide buffering and gain for low-voltage sensor interfaces where the available supply is between 2.5 V and 5.5 V. Four independent channels allow several sensor outputs to be conditioned with a common device type and package, reducing schematic and assembly complexity. The listed 30 nA input bias current is favorable for high-impedance sources, while the full-swing output increases usable range in restricted supply conditions. Designers should still calculate source impedance effects, establish the required noise gain, verify bias-current offset, and confirm that the sensor signal remains within the amplifier input common-mode range throughout its operating range.
Được đề xuất
Audio Signal Paths
The LMR824F-GE2 can support low-voltage audio buffer, preamplifier, and crossover stages where rail-to-rail output swing is useful. The four amplifier channels provide ample stage count for stereo buffering, active tone control, or a small multi-stage filter network, all operating from a 2.5 V to 5.5 V rail. Full-swing output can reduce clipping headroom concerns at low supply voltages, although input offset, noise, gain-bandwidth, and output-current limits determine practical fidelity. Audio-system implementation should include output coupling or load analysis, decoupling close to the supply pins, and a check of distortion and stability with the selected feedback topology and load impedance.
Được đề xuất
Instrumentation Signal Conditioning
The LMR824F-GE2 is applicable to instrumentation front ends that require multiple low-voltage gain or buffer stages. Its four-channel architecture can condition several related inputs while sharing the 2.5 V to 5.5 V supply, and the 30 nA listed input bias current helps limit loading from higher-impedance sources. The family’s high voltage gain and slew rate support wider-band signal processing than a basic precision DC amplifier. For instrumentation use, engineers should evaluate input offset, voltage and current noise, gain accuracy, common-mode rejection, and channel matching from the manufacturer datasheet. The feedback resistors and compensation selection should also be reviewed for the intended sensor bandwidth.
Được đề xuất
Industrial Low-Voltage Control Circuits
The LMR824F-GE2 can form part of low-voltage industrial control and monitoring circuits that amplify sensor outputs or condition control signals. Its 2.5 V to 5.5 V supply range fits compact control boards, while four channels can implement repeated amplifier or comparator-adjacent stages. The full-swing output supports downstream circuitry operating with limited rail-to-rail headroom. Industrial deployments must still account for temperature range, noise immunity, component tolerances, stable operation with realistic capacitive loads, and any long cable or sensor connections. Place decoupling close to the package supply pins and keep sensitive input routes away from relays, power switches, and high-current return paths.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LMR824F-GE2 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | ROHM Semiconductor |
| Package | 14-SOIC, 4.40 mm body width |
| Number of Channels | 4 circuits |
| Supply Voltage Range | 2.5 V to 5.5 V |
| Supply Current per Channel | 26 mA |
| Input Bias Current | 30 nA |
| Output Swing | Rail-to-rail, full-swing output |
| Primary Applications | Mobile equipment, low-voltage systems, and active filters |
| Delivery Format | Tape and reel |
Bảo phân biệt quan trọng
- Four amplifier circuits in one low-voltage package (vsA single-channel operational amplifier)
- Direct operation from low-voltage single supplies (vsA higher-minimum-supply amplifier)
- Full-swing output for low-headroom designs (vsA fixed-output amplifier)
- Low input bias current for impedance-sensitive sources (vsA higher-bias-current general-purpose amplifier)
Ghi chú thiết kế
Place the supply-decoupling capacitor immediately beside the positive and ground pins of the 14-SOIC. Keep the connection short and use a low-inductance ground return so switching disturbances on the shared 2.5 V to 5.5 V rail are not injected into all four amplifier channels. Route sensitive non-inverting inputs away from the supply pins, switching inductors, relays, and high-current output paths.
Do not assume that a rail-to-rail output guarantees an equally rail-to-rail input range. Check the LMR824F input common-mode limits, output-swing curve, load current, and stable feedback network for the selected gain. Also verify the 2.5 V minimum supply and the 5.5 V maximum supply before applying power; excessive voltage can damage the amplifier even when the output signal itself is small.
For active filters and high-gain stages, use the datasheet-recommended feedback topology and account for gain-bandwidth when setting the closed-loop gain and signal bandwidth. Keep resistor networks physically compact and away from noisy sources, because unequal feedback paths can increase noise pickup or reduce common-mode rejection. Confirm capacitive-load stability if the amplifier drives an ADC input, sampling network, or long routed cable.
Thông tin tuân thủ
The LMR824F-GE2 product page and 14-SOIC ordering information do not establish the requested environmental and automotive compliance statuses. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with ROHM before using the device in a regulated application.