NXP Semiconductors

LPC43S70FET256E - Dual-Core 204MHz MCU | NXP Semiconductors

MPN: LPC43S70FET256E ✓ Hoạt động
256-LBGA, 17 x 17 mm Package 204 MHz Speed 64 kB Memory
MOQ: 1 |

LPC43S70FET256E Tóm tắt

The NXP Semiconductors LPC43S70FET256E is a dual-core 32-bit Arm Cortex-M4/M0 microcontroller operating at up to 204 MHz, with 282 kB of SRAM and a 256-LBGA package measuring 17 x 17 mm. It is designed for embedded applications that require deterministic control, extensive connectivity, and an independent Cortex-M0 subsystem for peripheral management.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory interfaces, communications peripherals, timers, and control logic into one component. The LPC43S70 belongs to the Arm Cortex-M4 MCU family, where the primary Cortex-M4 core handles application processing while the Cortex-M0 subsystem offloads peripheral control. This architecture helps reduce contention on the main bus and supports responsive real-time behavior in industrial, communications, and consumer embedded systems.

The device combines a 3-stage, Harvard-architecture Cortex-M4 core with a separate Cortex-M0 coprocessor. Its peripheral set includes the State Configurable Timer, also known as SCTimer/PWM, and the Serial General Purpose I/O interface, or SGPIO. These resources allow designers to implement flexible pulse-width modulation, timing, serial I/O expansion, and communication functions without depending entirely on external programmable logic.

The LPC43S70FET256E also integrates an AES engine for hardware-assisted encryption. In an embedded design, this engine can offload cryptographic operations from the main CPU, improving throughput for protected data transfer, authentication, and secure firmware workflows. The part is identified as ROMless in distributor technical records, while one distributor summary also identifies 64 kB of on-chip ROM; verify the exact memory architecture for the selected ordering code in the manufacturer data sheet before finalizing the boot-memory design.

Typical applications include industrial automation controllers, communications gateways, motor and motion-control equipment, connected embedded systems, and secure control platforms. Its dual-core architecture is particularly useful where background peripheral servicing must continue while the primary core executes application logic. The 204 MHz Cortex-M4 performance also supports more responsive control loops and protocol handling than lower-speed microcontroller classes.

PCB design must account for the dense 256-ball BGA footprint and the manufacturer's decoupling, power-routing, and exposed-pad requirements. Place power and ground connections according to the data-sheet layout, provide the specified local capacitance, and route high-current and sensitive signals away from switching nodes. Use the device errata and current reference design information when validating startup behavior, flash programming, and peripheral configurations.

This product record combines the manufacturer architecture description with distributor package and ordering information, then adds application guidance, engineering cautions, and a focused comparison structure. It is intended to support early feasibility decisions, source evaluation, and hardware-planning discussions rather than replace the complete data sheet, reference manual, or errata documentation.

Bộ thay thế dễ dàng lắp đặt cho LPC43S70FET256E — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

LPC43S70FET256

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 256-LBGA (17 x 17 mm)
Uses the shortened family ordering identifier without the trailing E grade code; core frequency and package remain 204 MHz and 256-LBGA, while the exact temperature suffix requires verification.

📋 Tham chiếu thay thế (không có trong danh mục)

LPC43S67FET256

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 256-LBGA (17 x 17 mm)
Shares the 256-LBGA format and Cortex-M4/M0 architecture; SRAM, peripheral mix, and temperature grade differ from LPC43S70FET256E by up to approximately 30% and require pin-by-pin validation.

📋 Tham chiếu thay thế (không có trong danh mục)

LPC43S57FET256

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 256-LBGA (17 x 17 mm)
Uses the same 256-LBGA footprint and 204 MHz Cortex-M4 class, but memory and peripheral resources differ by up to approximately 30%; confirm every ball assignment before substitution.

📋 Tham chiếu thay thế (không có trong danh mục)

LPC43S27FET256

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 256-LBGA (17 x 17 mm)
Retains the 256-LBGA package and Cortex-M4/M0 core structure, while SRAM, timer, security, and peripheral capabilities differ by up to approximately 30% and must be checked against the target design.

📋 Tham chiếu thay thế (không có trong danh mục)

LPC43S67FET256E

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 256-LBGA (17 x 17 mm)
Adds the E ordering grade to the same-package LPC43S67 variant; memory and peripheral mappings differ by up to approximately 30% from LPC43S70FET256E, so software and board validation is required.

📋 Tham chiếu thay thế (không có trong danh mục)

LPC43S70FET256E Tỷ lệ tối đa & tính chất điện

Product Type 32-bit dual-core Arm Cortex-M4/M0 microcontroller
Primary Processor Core Arm Cortex-M4
Secondary Processor Core Arm Cortex-M0 subsystem and coprocessor
Maximum Processor Frequency 204 MHz
Instruction Width 32 bit
Processor Architecture Harvard architecture with 3-stage pipeline
SRAM Capacity 282 kB
On-Chip ROM 64 kB
Program Memory ROMless external-memory interface
Security Engine AES hardware encryption engine
Timer Peripheral State Configurable Timer (SCTimer/PWM)
Serial GPIO Peripheral Serial General Purpose I/O (SGPIO)
Debug Support Enhanced debug features
Low-Power Features Low-power consumption support
Package Type 256-LBGA, 17 x 17 mm
Kiểu lắp đặt Surface-mount ball grid array

Hướng dẫn cấu hình chân LPC43S70FET256E 256-lbga, 17 x 17 mm

Cấu hình chân cho LPC43S70FET256E (256-lbga, 17 x 17 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 256-lbga, 17 x 17 mm cho LPC43S70FET256E

Không có dữ liệu chân cụ thể sẵn có cho LPC43S70FET256E.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LPC43S70FET256E phù hợp cho 6 Áp dụngs: Industrial Automation Controller, Motor and Motion Control, Secure Communications Gateway, Connected Embedded Control Platform, Secure Data Acquisition System, Real-Time Sensor Hub.

🏭

Industrial Automation Controller

The LPC43S70FET256E fits industrial automation controllers that combine deterministic peripheral servicing with application-level control. Its 204 MHz Cortex-M4 core can execute communications and control software, while the Cortex-M0 subsystem manages peripheral tasks without requiring the same core to service every interrupt-driven function. The 282 kB SRAM provides working memory for diagnostics, protocol state, and control data. The State Configurable Timer supports flexible PWM and timing requirements common in actuator and machine-control systems. Before deployment, verify the operating-temperature grade, communication peripheral set, external memory needs, and functional-safety obligations for the specific equipment category.

🔧

Motor and Motion Control

The LPC43S70FET256E is suitable for motor and motion-control subsystems requiring high-speed computation, flexible PWM generation, and deterministic background I/O. The 204 MHz Cortex-M4 core can calculate control loops and process position or current-measurement data, while the Cortex-M0 subsystem can handle regular peripheral servicing. Its State Configurable Timer provides programmable PWM and timing functions, reducing dependence on external timing logic in suitable designs. The 282 kB SRAM is useful for retaining control parameters and sampled data. Final design validation should compare timer channels, capture functions, encoder interfaces, analog front ends, and safety requirements because these vary across LPC43S family members.

🌐

Secure Communications Gateway

The LPC43S70FET256E fits secure gateway designs that need substantial SRAM, a fast application processor, and hardware-assisted cryptography. Its 204 MHz Arm Cortex-M4 core can manage protocol stacks and packet processing, while 282 kB SRAM supports buffers, routing tables, session state, and diagnostic information. The integrated AES engine accelerates cryptographic operations, reducing the processing burden compared with a software-only implementation. For gateway use, verify which communication peripherals are populated on the exact device and whether the selected E suffix supports the required temperature range. External flash, Ethernet, or radio interfaces may also be required depending on the system architecture.

🧩

Connected Embedded Control Platform

The LPC43S70FET256E works well as the central controller in connected embedded equipment where local real-time behavior and system connectivity must coexist. The primary Cortex-M4 core can run application and network-facing logic, while the Cortex-M0 subsystem supports background peripheral management and reduces contention on shared internal resources. The 282 kB SRAM permits larger working buffers than many compact MCUs, while the 17 x 17 mm 256-LBGA package supports dense board layouts. Designers should account for BGA assembly requirements, power sequencing, decoupling, and external-interface expansion. The SGPIO interface can also provide serialized peripheral expansion when direct parallel I/O is unavailable.

📊

Secure Data Acquisition System

The LPC43S70FET256E can serve as a data-acquisition controller when a design requires deterministic peripheral handling, local processing, and authenticated data transfer. The 204 MHz Cortex-M4 core handles sampling orchestration and communication software, while the Cortex-M0 subsystem can service timing-sensitive input and output events. Its 282 kB SRAM provides a sizable acquisition buffer for short bursts and protocol processing. The AES engine adds hardware-assisted protection for stored or transmitted data. Engineering validation should include the exact ADC, timer, serial-interface, and DMA resources available on the device, along with input bandwidth, sampling latency, thermal limits, and external memory requirements for long-term data retention.

🧩

Real-Time Sensor Hub

The LPC43S70FET256E is a strong candidate for a real-time sensor hub that must gather inputs, perform local processing, and maintain communication with a higher-level controller. Its 204 MHz Cortex-M4 core can execute filtering, diagnostics, and protocol logic, while the Cortex-M0 subsystem manages repetitive peripheral operations. With 282 kB of SRAM, the controller can retain sensor histories, calibration values, and network state without immediate off-chip access. The configurable timer supports periodic sampling and PWM-related outputs, and SGPIO can expand serial peripheral access. Before choosing it for a deployed sensor node, verify analog and communications peripherals, low-power behavior, operating-temperature range, and the board-level requirements of the dense BGA footprint.

Tóm tắt các sản phẩm được đề xuất

LPC43S70FET256 Same LPC43S70 family device used for core-based control Được sử dụng trong: Industrial Automation Controller, Motor and Motion Control, Secure Communications Gateway, Secure Data Acquisition System, Real-Time Sensor Hub LPC43S67FET256 Cortex-M4/M0 family option for industrial peripheral control Được sử dụng trong: Industrial Automation Controller, Connected Embedded Control Platform LPC43S27FET256 Family-level motor-control alternative Được sử dụng trong: Motor and Motion Control, Connected Embedded Control Platform, Real-Time Sensor Hub LPC43S57FET256 Family-level secure communications processor Được sử dụng trong: Secure Communications Gateway, Secure Data Acquisition System
Where can I download the LPC43S70FET256E datasheet PDF?
The LPC43S70FET256E datasheet is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC43S70.pdf. It describes the dual-core Arm Cortex-M4/M0 architecture, 204 MHz operating frequency, 282 kB SRAM, security features, and configurable peripherals. Use the document named LPC43S70 Product Data Sheet together with the current device errata and reference manual when completing a hardware or firmware design.
What are the key specifications of LPC43S70FET256E that engineers should know?
The LPC43S70FET256E combines a 204 MHz Arm Cortex-M4 core, an Arm Cortex-M0 subsystem, 282 kB of SRAM, and a hardware AES engine in a 256-LBGA package. It also provides the State Configurable Timer for PWM functions and the Serial General Purpose I/O interface. According to the NXP LPC43S70 Product Data Sheet, the Cortex-M4 core uses a Harvard architecture and a 3-stage pipeline.
What is the LPC43S70FET256E and what does the Cortex-M0 subsystem do?
The LPC43S70FET256E is a 32-bit dual-core embedded microcontroller based on Arm Cortex-M4 and Cortex-M0 processors. The Cortex-M4 performs primary application processing, while the Cortex-M0 subsystem manages peripherals and can offload servicing tasks from the main core. This division can improve responsiveness in systems that require deterministic peripheral handling alongside higher-level application logic.
Is the LPC43S70FET256E suitable for industrial automation and motor control?
Yes, the LPC43S70FET256E is suitable for industrial automation when its timers, communications resources, memory system, and dual-core architecture satisfy the control specification. Its State Configurable Timer supports flexible PWM and timing functions, while the Cortex-M0 subsystem can service peripherals independently. Final suitability depends on operating-temperature limits, communications requirements, safety certification, and timing margins confirmed in the data sheet.
What is the difference between LPC43S70FET256E and LPC43S70FET256?
The LPC43S70FET256E ordering code and LPC43S70FET256 family identifier both refer to the NXP LPC43S70 microcontroller in the 256-LBGA configuration. The trailing E is an ordering-temperature or grade code that must be interpreted using NXP's ordering-information table. Verify that the selected suffix meets the required ambient-temperature range before treating the two identifiers as interchangeable for procurement.
LPC43S70FET256E vs LPC43S67FET256 - which is better for a dual-core design?
LPC43S70FET256E is the stronger choice when the design specifically targets the LPC43S70 feature set, including 282 kB SRAM, SCTimer/PWM, SGPIO, and the documented AES engine. LPC43S67FET256 may be considered only after confirming its memory, peripheral, temperature, and pin compatibility against the required system. The two MPNs share the 256-LBGA class, but package similarity alone does not establish drop-in interchangeability.
When should I choose LPC43S70FET256E over another 256-BGA Cortex-M4 MCU?
Choose the LPC43S70FET256E when the design benefits from a dedicated Cortex-M0 peripheral-management subsystem, 282 kB SRAM, AES acceleration, SCTimer/PWM, and SGPIO in a 17 x 17 mm 256-LBGA package. Select another device only if it offers lower cost, a different memory architecture, broader temperature coverage, a simpler footprint, or peripherals that align more closely with the product. Pin and peripheral mapping remain critical.
Is LPC43S70FET256E suitable for a secure communications gateway?
Yes, the LPC43S70FET256E can support secure communications gateways because it includes a hardware AES engine, 282 kB SRAM, and a high-speed Cortex-M4 core. The AES engine can accelerate cryptographic workloads and reduce CPU time compared with software-only encryption. Interface count, protocol support, external memory requirements, and secure-boot implementation must still be confirmed against the gateway architecture.
What can replace the LPC43S70FET256E on an existing PCB?
No confirmed drop-in replacement is established for the LPC43S70FET256E in the available cross-reference records. A candidate must match the 256-LBGA footprint, pin assignment, memory architecture, core configuration, peripheral functions, voltage requirements, and operating-temperature grade. Before redesigning a populated board, obtain NXP documentation for each candidate and compare the complete pin-description and power tables.
Is LPC43S70FET256E the same as LPC43S70FET256?
LPC43S70FET256E is the complete orderable MPN, while LPC43S70FET256 is commonly used as the shortened family and product-page identifier. The extra E character denotes an ordering grade in the NXP numbering system. Treat them as related identifiers, but confirm the exact suffix and temperature range before placing an order or using the part in a regulated environment.
Where can I buy LPC43S70FET256E online and check current lead time?
Use the Request a Quote form on this page to request LPC43S70FET256E availability, current lead time, and ordering support. The form allows the request to be tied to the exact MPN and avoids relying on stale availability text. For production planning, request packaging, date-code, traceability, and minimum-order details in the same quotation request.
What is the price of LPC43S70FET256E?
Current LPC43S70FET256E commercial terms are obtained through the Request a Quote form on this page. Quote status can depend on order quantity, package form, date-code requirements, inventory, and supply conditions. Request the quantity break, authorized sourcing route, and expected shipment timing in the quotation rather than relying on an outdated listing value.
Is LPC43S70FET256E in stock?
Stock should be confirmed for the exact LPC43S70FET256E ordering code through the Request a Quote form on this page. Distributor snippets may represent changing inventory rather than a guaranteed allocation. For production builds, ask for quantity available, pack quantity, wafer-lot or date-code information, and whether any available material is factory-sealed and traceable.
How much SRAM and processing performance does LPC43S70FET256E provide?
The LPC43S70FET256E provides 282 kB of SRAM and operates at up to 204 MHz through its Arm Cortex-M4 core. According to the NXP product description, the primary processor uses a 3-stage Harvard architecture with separate local instruction and data buses. The additional Cortex-M0 subsystem manages peripherals, making the design useful for real-time embedded workloads that benefit from task partitioning.
What is the best NXP equivalent for LPC43S70FET256E?
The closest documented NXP-family starting point is LPC43S70FET256, which represents the same LPC43S70 and 256-LBGA product family without the full trailing grade code. Other NXP Cortex-M4 devices should not be called equivalents unless their pin assignments and peripheral configuration match. Use the LPC43S70 Product Data Sheet and the manufacturer's ordering table to determine whether a specific suffix satisfies the application.

Dữ liệu tham khảo kỹ thuật cho LPC43S70FET256E — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LPC43S70FET256E when the design needs a 204 MHz Arm Cortex-M4 core, a separate Cortex-M0 subsystem for peripheral management, 282 kB of SRAM, hardware AES, SCTimer/PWM, and SGPIO in a 256-LBGA package. It is particularly suitable for industrial controls, motion systems, secure gateways, connected equipment, and real-time sensor hubs. LPC43S70FET256 is the closest family identifier when only the shortened ordering name is being compared. Consider LPC43S67FET256 or LPC43S67FET256E only after their pin map, memory capacity, peripheral set, and temperature grade have been verified. LPC43S57FET256 and LPC43S27FET256 can serve broader Cortex-M4 control roles, but their lower-family feature sets may not reproduce the target's SRAM, security, timer, and serial-I/O capabilities. No cross-brand drop-in substitute is established because exact BGA ball compatibility and software-support equivalence must be demonstrated before replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LPC43S70FET256 LPC43S67FET256 LPC43S57FET256 LPC43S27FET256 LPC43S67FET256E
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm) 256-LBGA (17 x 17 mm)
Primary Processor Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum Frequency 204 MHz 204 MHz 204 MHz 204 MHz 204 MHz 204 MHz

Bảo phân biệt quan trọng

  • Dedicated Cortex-M0 peripheral-management subsystem (vsLPC43S67FET256)
  • Substantial on-chip SRAM for embedded buffering (vsLPC43S27FET256)
  • Configurable timing and serial I/O resources (vsLPC43S57FET256)
  • Hardware-assisted AES security (vsLPC43S67FET256E)

Ghi chú thiết kế

Follow the manufacturer land pattern and ball-reference diagram for the 256-LBGA package. Place the prescribed supply and ground decoupling capacitors directly beside their corresponding balls, and provide continuous return paths beneath and between the power nets. The 17 x 17 mm BGA has fine pitch and dense routing, so PCB assembly capability, solder-mask definition, via-in-pad use, and reflow-profile compatibility must be reviewed before layout release.

Partition the power rails according to the data-sheet requirements and keep switching-regulator outputs away from sensitive analog and communication nodes. Use the documented external-memory interface only with the voltage, timing, impedance, and decoupling specified by NXP. Check the complete operating-temperature grade selected by the E suffix; a 204 MHz operating frequency does not itself guarantee that every peripheral or external interface is rated across the same range.

Do not assume that every LPC43S family member with a 256-LBGA package has an identical ball map or peripheral set. Before substituting LPC43S67FET256, LPC43S57FET256, LPC43S27FET256, or LPC43S67FET256E, compare the power balls, debug interface, external-memory pins, communications peripherals, timer channels, interrupts, and firmware-support requirements against the LPC43S70FET256E documentation. Package sameness is necessary but does not replace complete pin validation.

Preserve the intended separation between the Cortex-M4 application domain and Cortex-M0 peripheral-management workload in both hardware and software. Route high-speed external-memory and communication signals with continuous reference planes, avoid split returns under the BGA, and keep switching nodes compact. Validate timing with the external-memory device, transceiver, and load models used in the final system rather than relying only on default MCU timing assumptions.

Estimated: the complete board-level dissipation cannot be calculated without the selected core frequency, active peripherals, external-memory activity, supply voltage, and ambient temperature. Use the NXP power-budget guidance and measure current in the operating modes that matter. Apply the lowest approved frequency or use clock-gating features when the workload permits, while ensuring that power-management transitions do not violate peripheral timing requirements.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The NXP product page and LPC43S70 data sheet are the authoritative sources for ordering, environmental, and qualification information. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the retrieved records.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lpc43s70fet256e nxp LPC43S70FET256E datasheet LPC43S70FET256E datasheet pdf LPC43S70FET256E pinout LPC43S70FET256E equivalent LPC43S70FET256E replacement LPC43S70FET256E cross reference LPC43S70FET256E vs LPC43S67FET256 LPC43S70FET256E 256-LBGA LPC43S70FET256E 282 kB SRAM LPC43S70FET256E Cortex-M4 M0 LPC43S70FET256E application circuit LPC43S70FET256E price LPC43S70FET256E stock

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors LPC43S70FET256E LPC43S70FET256 LPC43S67FET256 LPC43S57FET256 LPC43S27FET256 LPC43S67FET256E Arm Cortex-M4 Arm Cortex-M0 32-bit microcontroller dual-core microcontroller embedded microcontroller microcontroller semiconductor 282 kB SRAM 204 MHz AES engine SCTimer/PWM SGPIO Harvard architecture 256-LBGA BGA surface mount industrial automation motion control communications gateway
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ