LT111AH Military Voltage Comparator | Analog Devices
MPN: LT111AH ✗ Cuối đờiLT111AH Tóm tắt
A voltage comparator is an analog integrated circuit that compares two input voltages and changes its output when the difference crosses a defined threshold. Within the broader semiconductor hierarchy, a comparator belongs to the linear IC family and the amplifier IC category. Unlike a general-purpose operational amplifier, its principal purpose is fast, deliberate state transition according to the polarity of its differential input rather than linear amplification.
The LT111AH is associated with the LT111 comparator family and is offered in a military temperature grade. The H suffix distinguishes this ordering code from other package, temperature, or accuracy variants, but the supplied excerpts do not expose the underlying ordering-code table needed to state every suffix characteristic. Its TO-5 construction uses wire-form leads and suits legacy or ruggedized assemblies where a through-hole metal package is preferred. The round package also requires care during insertion because lead orientation determines correct comparison-input and output connections.
Verified distributor records classify the part as a comparator and show commercial listings through DigiKey, Octopart, Xecor, and other suppliers. The available Cytech Systems result reports zero stock and $0.0000 reference prices, so those values cannot be interpreted as a usable quotation. The Linear Technology page indexed by linear-electronic.com reports 3,320 pieces in stock, but that vendor record is not treated as an authoritative global stock figure. Pricing and availability should therefore be confirmed at order time.
The LT111AH can be evaluated for industrial control, instrumentation, alarm detection, and legacy equipment, provided the system supply stays within the family limits. External resistors and protection networks may be needed to constrain inputs or accelerate an open-collector output, but exact values cannot be selected responsibly without verified input thresholds, output architecture, supply range, and timing specifications. This page combines the verified source excerpts with explicit data gaps rather than inferring unseen electrical limits.
The primary engineering task is to verify the manufacturer datasheet before layout signoff, especially for supply voltage, common-mode range, output sink current, offset voltage, response time, and the exact TO-5 pin map. For replacement work, engineers should require both mechanical equivalence and pin-level compatibility rather than relying only on the comparator function. A device that performs the same threshold decision but exposes different pins or output behavior is not necessarily interchangeable in production.
This page distinguishes verified facts from unavailable parameters, consolidates distributor and datasheet links, and provides replacement and design guidance for engineers evaluating the LT111AH. Commercial prices are reported as of 2026-10-22 only where a source supplied a value; otherwise a quote is required.
Bộ thay thế dễ dàng lắp đặt cho LT111AH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếLT111AH Tỷ lệ tối đa & tính chất điện
| Product Type | IC voltage comparator |
| Manufacturer | Analog Devices |
| Number of Channels | 1 channel |
| Temperature Grade | Military |
| Maximum Operating Temperature | 125 °C |
| Hộp | TO-5, round |
| Terminal Count | 8 terminals |
| Terminal Form | Wire |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Hướng dẫn cấu hình chân LT111AH to-5, round
Cấu hình chân cho LT111AH (to-5, round gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LT111AH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LT111AH phù hợp cho 6 Áp dụngs: Legacy Industrial Control Systems, Sensor Threshold Detection, Power Supply Window Supervision, Test and Measurement Instruments, Alarm and Fault Detection, Aerospace and Rugged Electronics.
Legacy Industrial Control Systems
The LT111AH can support threshold decisions in legacy industrial control equipment where an 8-terminal TO-5 comparator is already supported by the PCB and qualified supply chain. Its military temperature grade and stated 125 °C maximum operating temperature make it relevant to equipment expected to operate above ordinary commercial-temperature limits. Before fitting it into a control loop, verify the actual supply range, input common-mode limits, propagation delay, and output architecture from the manufacturer datasheet. Those missing values determine whether the comparator can safely monitor a control node without saturating or introducing unacceptable switching delay.
Được đề xuất
Sensor Threshold Detection
LT111AH can evaluate a sensor-derived voltage against a reference when the application already uses the LT111 family's TO-5 implementation. The comparison function is appropriate for detecting upper or lower limits, but the available records do not provide offset voltage, input noise, response time, or common-mode limits. Those characteristics control false triggering near the threshold and behavior during sensor transitions. The circuit must therefore include reference and protection design only after the complete electrical table has been checked against the sensor's output swing and operating temperature.
Được đề xuất
Power Supply Window Supervision
A LT111AH-based circuit may compare a generated supply or divided supply node with a reference to identify an out-of-range condition. The military-grade designation and 125 °C maximum operating temperature are relevant for rugged equipment, but the source excerpts do not establish whether the LT111AH output can directly drive supervisor logic or how its supply range aligns with the monitored rails. Confirm input limits and output topology first. A pull-up may be needed if the device uses an open-collector output, but that arrangement must be verified rather than assumed from the related LT311AH record.
Được đề xuất
Test and Measurement Instruments
LT111AH can be evaluated for threshold or polarity decisions in legacy test equipment that accepts a wired round TO-5 comparator. Its military grade may support extended-temperature calibration or service applications, subject to confirmation of the complete temperature interval. The excerpts do not provide response time, input offset, noise, or output-drive data, all of which affect measurement resolution and settling behavior. Preserve the original circuit topology where possible and compare those parameters with the original instrument specification to prevent a functionally similar comparator from changing measurement accuracy or triggering behavior.
Được đề xuất
Alarm and Fault Detection
The LT111AH comparator function fits an alarm or fault detector that changes state when a monitored analog voltage crosses a selected level. In transportation or safety-adjacent equipment, its listed military grade can be advantageous, but suitability must be established against the required temperature range and failure-response criteria. Since the verified excerpts omit common-mode limits and propagation delay, they cannot establish detection speed or safe input tolerance. Keep input voltages within verified limits and qualify the complete alarm path before using the part as the sole basis for protective action.
Được đề xuất
Aerospace and Rugged Electronics
LT111AH may be relevant to rugged or aerospace-oriented maintenance hardware because its records identify a military temperature grade, a 125 °C maximum, and a wired TO-5 construction. Those attributes can help preserve compatibility with older high-reliability assemblies, although military grade in a distributor description does not by itself establish a particular qualification program or traceability level. Review the manufacturer ordering table, operating-temperature range, package drawing, and screening options. New aerospace designs should also evaluate newer low-noise, rail-to-rail comparators if PCB redesign is acceptable.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LT111AH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Analog Devices |
| Package | TO-5, round |
| Product Type | IC voltage comparator |
| Channel Count | 1 channel |
| Temperature Grade | Military |
| Maximum Operating Temperature | 125 °C |
| Terminal Count | 8 terminals |
| Terminal Form | Wire |
| Reference Price at Quantity 1 | $0.0000 as of 2026-10-22; Cytech reference price only |
| Verified Availability | Vendor records conflict |
Bảo phân biệt quan trọng
- Legacy-compatible metal-can construction (vsLM393P)
- Military temperature designation (vsLM311)
- Single-comparator function in an 8-terminal package (vsLM339N)
Ghi chú thiết kế
Do not treat LT111A, LT311AH, LM311, or NTE922 as drop-in substitutes based only on comparator function. The supplied results do not verify an identical 8-terminal TO-5 pin map, common-mode range, output architecture, or military temperature grade. Before replacing LT111AH, compare the manufacturer package drawing and every electrical limit, then test threshold polarity, output state, saturation behavior, and timing in the actual circuit.
Confirm the physical pin-1 orientation and all eight TO-5 connections before inserting the comparator. The verified excerpts establish wire leads and a round package but do not provide the numbered pin map. Preserve the original lead spacing, hole size, and copper clearance where possible, and route sensitive comparison inputs away from switching nodes. Any input divider or protection network must be calculated only after the supply and common-mode limits are confirmed.
A comparator output network cannot be finalized until its output type and current rating are verified. If the LT111AH uses an open-collector output, an external pull-up controls the logic-high level and output rise time; if it uses a totem-pole output, a pull-up may be inappropriate. Check the manufacturer output section, choose resistor values from the verified sink-current and capacitance limits, and account for system-level 5 V or legacy logic thresholds.
Thông tin tuân thủ
The supplied excerpts identify military temperature grade but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No environmental or automotive compliance claim is inferred from the military-grade description.
