LT1763CS8-3.3#TRPBF - 3.3V 500mA Low-Noise LDO | Analog Devices
MPN: LT1763CS8-3.3#TRPBF ✓ Hoạt độngLT1763CS8-3.3#TRPBF Tóm tắt
An LDO is a linear regulator that maintains a relatively stable output voltage while dissipating power as the difference between input and output voltage multiplied by load current. Compared with a switching regulator, an LDO generally offers simpler control and lower switching-related noise, making the LT1763 suitable for RF systems, battery-powered equipment, low-noise analog supplies, and communication circuits. The LT1763 family also includes fixed outputs from 1.5V through 5V and an adjustable version with a 1.22V reference voltage.
Key verified features include a 500mA output-current capability, a 300mV dropout voltage, and low 30uA quiescent current. The 3.3V fixed-output suffix identifies the target rail, while the CS8 package designation identifies the 8-lead SOIC form used by the distributor listings. The low quiescent current is particularly useful when the regulator is expected to consume little power during unloaded or lightly loaded battery operation.
The LT1763 series is described by the manufacturer as a micropower, low-noise, low-dropout regulator family. Its architecture is intended to provide regulation close to the load, which can help reduce supply perturbations in RF and precision analog systems. The family data identifies 8-lead SO and 12-lead DFN package options, while this particular orderable MPN is listed in 8-SO packaging.
Typical uses include RF systems, battery-powered products, communications equipment, sensor interfaces, and analog signal-conditioning circuits requiring a 3.3V rail. When selecting the device, verify the complete manufacturer electrical characteristics, including input-voltage limits, output accuracy, noise, stability, current limit, thermal behavior, and capacitor requirements. The verified web data provides the principal identity, output voltage, current rating, package family, dropout, and quiescent-current facts; additional detailed limits are marked where not supplied.
For implementation, place the regulator close to the load and follow the manufacturer datasheet recommendations for input and output capacitors, layout, and thermal management. The low 30uA quiescent current is a useful advantage in portable systems, but the final power budget must include regulator dissipation and load-dependent behavior. This page combines verified manufacturer and distributor information with application guidance and identifies where additional datasheet values are needed.
Bộ thay thế dễ dàng lắp đặt cho LT1763CS8-3.3#TRPBF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LT1763CS8-3.3#PBF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LT1763IS8-3.3#TRPBF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LT1763CS8-3#TRPBF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LT1763CS8-5#TRPBF
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LT1763CS8-2.5#TRPBF
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LT1763CS8-3.3#TRPBF Tỷ lệ tối đa & tính chất điện
| Regulator Type | Fixed positive low-dropout linear regulator |
| Điện áp đầu ra | 3.3 V |
| Output Current | 500 mA |
| Điện áp mất áp | 300 mV |
| Điện áp yên tĩnh | 30 uA |
| Hộp | 8-lead SOIC |
| Package Family | SOIC-8 surface-mount package |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân LT1763CS8-3.3#TRPBF soic-8 surface-mount package
Cấu hình chân cho LT1763CS8-3.3#TRPBF (soic-8 surface-mount package gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho LT1763CS8-3.3#TRPBF.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LT1763CS8-3.3#TRPBF phù hợp cho 6 Áp dụngs: RF Systems, Battery-Powered Equipment, Low-Noise Analog Supplies, Communications Modules, Sensor Interfaces, Industrial Control Logic.
RF Systems
The LT1763CS8-3.3#TRPBF fits RF-system supply points that require a fixed 3.3V rail with low dropout and low quiescent current. Place it near the RF load to reduce supply-path disturbance, while observing the verified 500mA current rating and 300mV dropout requirement. The regulator's low-noise family positioning is useful when switching circuitry or battery transients could otherwise disturb sensitive RF stages. Confirm the complete input range, output accuracy, stability requirements, and thermal limits in the manufacturer datasheet before release.
Được đề xuất
Battery-Powered Equipment
The LT1763CS8-3.3#TRPBF is appropriate for portable equipment that operates from a battery-derived 3.3V rail. Its verified 30uA quiescent current helps limit regulator overhead during light-load or standby periods, while the 300mV dropout specification supports regulation when the input approaches the output. Actual battery savings depend on the load profile, so calculate both quiescent consumption and load-dependent dissipation. Confirm that the battery voltage remains above the required dropout headroom at the highest current.
Được đề xuất
Low-Noise Analog Supplies
Use the LT1763CS8-3.3#TRPBF when a downstream analog circuit needs a simple, fixed 3.3V supply and the system benefits from the LT1763 family's low-noise, low-dropout architecture. Its 500mA capability is suitable for moderate analog loads, and the 8-lead SOIC package supports conventional surface-mount assembly. The exact noise spectrum and output accuracy are not supplied in the verified data, so do not select it solely on an unquantified noise claim; review the official datasheet and measure the final supply under the intended load and layout.
Được đề xuất
Communications Modules
The LT1763CS8-3.3#TRPBF can provide a fixed 3.3V rail for communication modules whose operating voltage and current fit the LT1763 family's verified 3.3V, 500mA capability. A low-dropout LDO may simplify the power tree compared with adding another switching stage, although the trade-off is linear dissipation and potentially lower conversion efficiency when the input-to-output voltage difference is large. Place input and output capacitors close to the device and verify the datasheet's recommended values and stability conditions.
Được đề xuất
Sensor Interfaces
The LT1763CS8-3.3#TRPBF is suitable for small sensor-interface boards that need a local 3.3V regulator and can remain below 500mA. Local regulation can reduce the voltage variation seen by the sensor circuitry compared with routing an unprotected system rail directly to the sensor. The part's 30uA quiescent current is useful for compact battery-powered sensor nodes, but the complete input range and temperature limits must be checked against the source voltage and enclosure conditions before design release.
Được đề xuất
Industrial Control Logic
The LT1763CS8-3.3#TRPBF can serve as a local 3.3V regulator for low- to moderate-current industrial control logic when a linear rail is preferred for simplicity and low switching noise. The 500mA output rating supports many logic and interface loads, but the design must include thermal analysis proportional to the input-output voltage difference and current. Confirm the industrial temperature range, transient response, output capacitor requirements, and pin-level electrical ratings in the manufacturer documentation before using it in a production control board.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LT1763CS8-3.3#TRPBF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LT1763CS8-3.3#PBF | LT1763IS8-3.3#TRPBF | LT1763CS8-3#TRPBF | LT1763CS8-5#TRPBF | LT1763CS8-2.5#TRPBF |
|---|---|---|---|---|---|---|
| Output Voltage | 3.3 V | 3.3 V | 3.3 V family variant; confirm suffix specifications | 3 V | 5 V | 2.5 V |
| Package | 8-lead SOIC | 8-SO family package | 8-lead SOIC family format | 8-SO family package | 8-SO family package | 8-SO family package |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Output Type | Fixed positive | Fixed positive | Fixed positive family variant | Fixed positive | Fixed positive | Fixed positive |
| Regulator Family | LT1763 | LT1763 | LT1763 | LT1763 | LT1763 | LT1763 |
Bảo phân biệt quan trọng
- Fixed 3.3V output with 500mA capability (vsLT1763CS8-3#TRPBF)
- Low 30uA quiescent current (vsLT1763CS8-3.3#PBF)
- 500mA low-dropout regulator in SOIC-8 (vsLT1763CS8-5#TRPBF)
Ghi chú thiết kế
Estimated: with a 5V input, 3.3V output, and 100mA load, the ideal linear-regulator dissipation is (5V - 3.3V) × 0.1A = 0.17W. The actual device loss also includes quiescent current and internal losses, while the SOIC-8 thermal performance depends on PCB copper and ambient temperature. Verify the calculated dissipation against the manufacturer thermal limits before production.
Place the input capacitor, regulator, and output capacitor in a short current-loop path. Keep the regulator ground return compact and use the datasheet-recommended capacitor values and ESR range. Because the verified data does not include those values, do not select capacitors from memory; verify them against the official LT1763 datasheet and the intended output stability test conditions.
Do not confuse the 3.3V suffix with the 3V or 5V LT1763 variants. A 3V regulator cannot safely replace this part in a circuit that requires 3.3V, and a 5V part can damage downstream 3.3V devices. Also confirm the exact SOIC footprint, pin mapping, temperature grade, and ordering suffix before treating any related LT1763 MPN as a drop-in replacement.
Thông tin tuân thủ
RoHS compliance is supported by the verified cross-reference data. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals information were not sufficiently provided and remain unknown.
