Analog Devices

LT6203IS8 - Dual 100MHz Low-Noise Op Amp | Analog Devices

MPN: LT6203IS8 ✓ Hoạt động
MOQ: 1 |

LT6203IS8 Tóm tắt

The Analog Devices LT6203IS8 is a dual, rail-to-rail input and output operational amplifier featuring 100 MHz gain-bandwidth product, 1.9 nV/√Hz noise voltage, and 2.5 mA supply current per amplifier. It is packaged in an 8-lead small-outline package for industrial-grade applications.

An operational amplifier is an active analog signal-conditioning component that uses negative feedback to amplify voltage differences with high input impedance and low output impedance. The LT6203 belongs to the precision low-noise amplifier hierarchy: operational amplifier, voltage-feedback amplifier, signal-conditioning IC, and analog semiconductor. Rail-to-rail input and output operation supports signal swings near the supply rails, while unity-gain stability allows direct use as a buffer.

The LT6203 family combines low noise with high speed. Its 1.9 nV/√Hz voltage-noise density is suitable for extracting small signals from sensors, transducers, and precision converters. The 100 MHz gain-bandwidth product provides useful bandwidth for low-frequency instrumentation and moderate-bandwidth signal paths. A 25 V/μs slew rate supports faster large-signal transitions, while each amplifier draws 2.5 mA of supply current.

The dual configuration provides two amplifiers in one package, reducing component count in differential, instrumentation, filtering, and buffering circuits. Both inputs and outputs operate rail to rail, simplifying interface design when signal levels approach the available supply range. The amplifier family is designed for low-supply signal-conditioning systems where noise, power consumption, bandwidth, and output swing must be balanced in a compact implementation.

Typical uses include low-level sensor preamplification, audio and instrumentation signal paths, active filters, ADC or DAC input conditioning, and general-purpose dual-amplifier circuits. In a low-noise instrumentation stage, the amplifier can amplify a small bridge or transducer output while adding less noise than the signal being measured. In a filter or gain block, its unity-gain stability simplifies compensation and supports straightforward implementation.

The primary design considerations are supply-voltage limits, input and output range, load stability, noise performance, and PCB layout. Keep sensitive input and feedback traces short, place compensation and decoupling components close to their associated pins, and provide a low-impedance return path. Confirm the complete electrical limits and pin configuration in the manufacturer datasheet before applying the device to precision or safety-critical circuitry.

This page combines the LT6203IS8 electrical characteristics, package information, family-level application guidance, drop-in alternatives, and practical design notes. These engineering details help engineers determine whether the amplifier's combination of low noise, high bandwidth, rail-to-rail operation, and low supply current suits a specific analog signal chain.

Bộ thay thế dễ dàng lắp đặt cho LT6203IS8 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

LT6203IS8#TR

✅ Drop-In
📦 8-SO
Same LT6203 dual-amplifier electrical configuration and 8-SO footprint; ordering format changes to tape and reel, with no stated change in the 100 MHz bandwidth or 1.9 nV/√Hz noise rating.

📋 Tham chiếu thay thế (không có trong danh mục)

LT6203IS8#PBF

✅ Drop-In
📦 8-SO
Same base LT6203IS8 device and 8-SO footprint; ordering-code difference is the #PBF suffix, while no electrical parameter change is established.

📋 Tham chiếu thay thế (không có trong danh mục)

LT6203XS

✅ Drop-In
📦 8-SO
Same LT6203 dual-amplifier family and 8-lead SO format; LT6203XS is characterized over a broader temperature range than the -40°C to +85°C LT6203IS industrial grade.

📋 Tham chiếu thay thế (không có trong danh mục)

LT6203IS8 Tỷ lệ tối đa & tính chất điện

Không có thông số kỹ thuật sẵn có

Hướng dẫn cấu hình chân LT6203IS8 standard

Cấu hình chân cho LT6203IS8 (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân standard cho LT6203IS8

Không có dữ liệu chân cụ thể sẵn có cho LT6203IS8.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LT6203IS8 phù hợp cho 6 Áp dụngs: Low-Level Sensor Signal Conditioning, Precision Instrumentation Amplifier, Active Audio Signal Path, ADC and DAC Interface Conditioning, Low-Power Portable Electronics, Wideband Active Filtering.

🧩

Low-Level Sensor Signal Conditioning

The LT6203IS8 fits precision sensor preamplification because each amplifier combines 1.9 nV/√Hz input-noise density with a 100 MHz gain-bandwidth product. Its rail-to-rail input stage can accept signals near the supply limits, and unity-gain stability supports buffered sensor outputs without external compensation. The 2.5 mA per-amplifier supply current also helps limit power in portable or distributed instrumentation. Use short, guarded input traces and verify the complete common-mode and output-range limits for the selected supply voltage.

🏭

Precision Instrumentation Amplifier

The dual LT6203IS8 can implement front-end signal conditioning for bridge, current-loop, or differential sensor measurements where low input noise is important. Its 1.9 nV/√Hz noise density reduces amplifier-added noise relative to many general-purpose dual op amps, while the 100 MHz gain-bandwidth product preserves signal phase and amplitude through moderate-bandwidth filters. The dual package supports two amplifier sections without requiring a quad package. Component matching and resistor accuracy remain critical when a discrete instrumentation-amplifier topology is used.

🎧

Active Audio Signal Path

The LT6203IS8 is suitable for low-noise audio preamplification because its 1.9 nV/√Hz voltage-noise density can preserve small musical or microphone signals, while rail-to-rail input and output operation accommodates low-voltage audio circuitry. The 25 V/μs slew rate provides ample headroom for dynamic signal transitions, and unity-gain stability allows direct buffering. Layout should keep the input path away from switching nodes and power converters, with the output load checked against the datasheet stability and output-drive limits.

📺

ADC and DAC Interface Conditioning

The LT6203IS8 can buffer or amplify signals between converters and external analog networks. Its 100 MHz gain-bandwidth product is well suited to preserving higher-frequency content, while the low 2.5 mA per-amplifier supply current supports compact, low-power acquisition systems. Rail-to-rail operation simplifies biasing around wide or low-voltage converter ranges. Select the external gain and anti-aliasing network carefully, and validate settling time at the required conversion rate rather than relying only on gain-bandwidth product.

📱

Low-Power Portable Electronics

The LT6203IS8 addresses portable electronics that require two high-speed amplifiers without the supply current of higher-power precision amplifiers. Each channel draws 2.5 mA, and the 100 MHz gain-bandwidth product supports signal conditioning beyond audio-bandwidth requirements. The 8-lead small-outline package also conserves board area compared with separate single amplifiers. Battery-powered designs should still account for regulator dropout, load-transient behavior, input bias current, and the amplifier's quiescent-current contribution at the actual operating voltage.

🌐

Wideband Active Filtering

The LT6203IS8 is suitable for active filter and frequency-shaping blocks that benefit from a 100 MHz unity-gain bandwidth and unity-gain stability. A stable voltage-feedback amplifier simplifies equalization, smoothing, anti-aliasing, and noise-shaping implementations while its 25 V/μs slew rate helps limit large-signal distortion. The two channels can implement a state-variable filter, active differentiator, or paired quadrature network. Stability and distortion depend on component tolerances, operating gain, load impedance, and the exact filter topology, so simulate the final network.

Tóm tắt các sản phẩm được đề xuất

LT6202IS8 Single-amplifier member of the same low-noise LT6202/LT6203/LT6204 family Được sử dụng trong: Low-Level Sensor Signal Conditioning, Precision Instrumentation Amplifier, Active Audio Signal Path, Low-Power Portable Electronics, Wideband Active Filtering LT6204IS8 Quad-amplifier member of the same low-noise family for multi-channel designs Được sử dụng trong: Low-Level Sensor Signal Conditioning, Precision Instrumentation Amplifier, Active Audio Signal Path, Low-Power Portable Electronics, Wideband Active Filtering LT6203IS8#TR Same-family production ordering option Được sử dụng trong: Precision Instrumentation Amplifier ADS8519IDB Texas Instruments Được sử dụng trong: ADC and DAC Interface Conditioning ADS1262IPW Texas Instruments Được sử dụng trong: ADC and DAC Interface Conditioning ADS1131IDR Texas Instruments Được sử dụng trong: ADC and DAC Interface Conditioning
What is the LT6203IS8?
The LT6203IS8 is a dual rail-to-rail input and output operational amplifier with a 100 MHz gain-bandwidth product, 1.9 nV/√Hz noise voltage density, and a 2.5 mA supply-current rating per amplifier. According to the Analog Devices LT6202/LT6203/LT6204 datasheet, the device is optimized for low-supply signal-conditioning systems and is supplied in an 8-lead small-outline package.
What are the key specifications of LT6203IS8?
The LT6203IS8 combines two amplifiers in one 8-lead small-outline package. Its headline specifications are 100 MHz gain-bandwidth product, 1.9 nV/√Hz input-noise density, 25 V/μs slew rate, and 2.5 mA supply current per amplifier. The Analog Devices family datasheet also identifies rail-to-rail input and output operation and unity-gain stability, making the LT6203 suitable for low-noise buffers, filters, and instrumentation amplifiers.
Where can I download the LT6203IS8 datasheet PDF?
The official LT6203IS8 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/620234fd.pdf. It covers the LT6202, LT6203, and LT6204 single-, dual-, and quad-amplifier family, including electrical characteristics, pin configurations, typical applications, and package drawings. Use the ordering information to confirm the exact LT6203IS8 variant and industrial temperature grade.
Where can I find the LT6203IS8 pinout?
The LT6203IS8 pin configuration is shown in the pin-description and package-drawing sections of the official Analog Devices 620234fd datasheet. The device is an 8-lead small-outline dual operational amplifier. Before assigning PCB nets, verify every amplifier A and B input, output, positive-supply, and negative-supply connection directly against that datasheet rather than relying on a generic SOIC-8 drawing.
Is LT6203IS8 suitable for low-noise signal conditioning?
Yes, the LT6203IS8 is specifically suited to low-noise, low-supply signal conditioning. Its 1.9 nV/√Hz voltage-noise density and 100 MHz gain-bandwidth product allow small sensor and instrumentation signals to be amplified with low added noise. The 25 V/μs slew rate also helps preserve large-signal fidelity when operating at higher frequencies or with low-amplitude, high-frequency waveforms.
Can LT6203IS8 operate near its supply rails?
Yes, the LT6203IS8 provides rail-to-rail input and output operation according to the Analog Devices family datasheet. This makes it useful when the input or output must approach the supply limits rather than remaining well inside the rails. Actual headroom and output swing depend on the operating voltage, load, output-current direction, and the electrical limits specified for the exact device.
What is the difference between LT6203IS8 and LT6203IS8#TR?
The LT6203IS8 and LT6203IS8#TR identify the same dual LT6203 amplifier family and electrical configuration, but their order suffixes distinguish packaging and shipping format. The LT6203IS8 listing is associated with an 8-lead small-outline package, while the #TR version is the tape-and-reel ordering option. For a production BOM, confirm the package, termination, temperature grade, and orientation before treating one ordering code as interchangeable.
When should I choose LT6203IS8 over another dual op amp?
Choose the LT6203IS8 when the design needs two amplifiers with 100 MHz bandwidth, 1.9 nV/√Hz noise density, rail-to-rail input and output behavior, and only 2.5 mA of supply current per amplifier. A lower-noise alternative may be preferable for extremely small-signal work, while a lower-bandwidth part may be adequate for slower instrumentation. Select by checking noise, bandwidth, slew rate, supply current, and rail range together.
What is the best drop-in replacement for LT6203IS8?
The closest documented ordering alternative is LT6203IS8#TR, which uses the same LT6203 family and 8-lead small-outline electrical configuration while changing the tape-and-reel order format. The cross-reference results also list LT6203IDD and LT6203XS as possible alternatives, but each requires package and temperature-grade verification. No cross-brand drop-in replacement was established with enough pin-level evidence to recommend automatically.
Can LT6203IS8 replace LT6203IS8#TR?
The LT6203IS8 can be used in place of the LT6203IS8#TR when the electrical configuration, 8-lead small-outline footprint, temperature grade, and assembly requirements are identical, but the physical delivery format differs. The #TR suffix denotes a tape-and-reel order format. Confirm reel-versus-tube procurement and production pick-and-place requirements before approving the substitution.
What can replace LT6203IS8 in an 8-lead dual op-amp design?
An LT6203-series 8-lead device is the most defensible replacement path because it retains the dual-amplifier architecture and SOIC-8 footprint. LT6203XS is described as an 8-pin SO option, while LT6203IS8#PBF and LT6203IS8#TR are ordering variants of the target. Confirm pinout, temperature range, supply limits, and electrical tolerances against the manufacturer datasheet before production use.
Is there an Analog Devices equivalent for LT6203IS8?
The closest Analog Devices-family options are the LT6203IS8#TR and LT6203IS8#PBF order codes, along with the LT6203XS industrial variant. These are same-family candidates rather than different manufacturers. The LT6202 and LT6204 should not be treated as drop-ins because they provide one and four amplifiers respectively, requiring different packages and pin assignments.
What is the lead time and stock status for LT6203IS8?
The LT6203IS8 is shown as a purchasable standard general-purpose amplifier, but a fixed production lead time and guaranteed stock quantity are not published on the product page. Use the Request a Quote form on this page for current availability, minimum order quantity, scheduled lead time, and tube or reel logistics for the exact ordering code.
How much does LT6203IS8 cost?
Current commercial pricing for LT6203IS8 is not stated in a form that can be safely published as a fixed unit price. Use the Request a Quote form on this page to request current pricing for the exact MPN, required quantity, and desired packaging. The platform can also confirm lifecycle availability and lot-specific logistics before an order is placed.
Where can I buy LT6203IS8 online?
The LT6203IS8 can be ordered by submitting the exact MPN and required quantity through the Request a Quote form on this page. The part is an 8-lead small-outline, dual rail-to-rail operational amplifier rated for industrial-temperature characterization in the family documentation. The quotation request should also specify tube or tape-and-reel format and any date-code or traceability requirements.

Dữ liệu tham khảo kỹ thuật cho LT6203IS8 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose LT6203IS8 for a compact dual-channel analog design that combines 1.9 nV/√Hz noise density, 100 MHz gain-bandwidth product, rail-to-rail input and output behavior, and 2.5 mA per amplifier. LT6203IS8#TR is appropriate when the same electrical device is required in tape-and-reel production format, while LT6203IS8#PBF can be considered when its ordering and termination requirements satisfy the assembly process. LT6203XS is the better related choice when a broader characterized temperature range is required in the same 8-SO dual-amplifier format. LT6202IS8 and LT6204IS8 are useful family resources but are not pin-compatible substitutes because they contain one and four amplifiers, respectively. No cross-brand replacement is recommended without a verified 8-SO footprint, matching dual-op-amp pinout, and electrical review.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LT6203IS8#TR LT6203IS8#PBF LT6203XS
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-SO 8-SO 8-SO 8-SO
Amplifier Count 2 2 2 2
Gain-Bandwidth Product 100 MHz 100 MHz 100 MHz 100 MHz
Input Noise Density 1.9 nV/√Hz 1.9 nV/√Hz 1.9 nV/√Hz 1.9 nV/√Hz
Slew Rate 25 V/μs 25 V/μs 25 V/μs 25 V/μs
Supply Current per Amplifier 2.5 mA 2.5 mA 2.5 mA 2.5 mA
Input and Output Operation Rail-to-Rail Rail-to-Rail Rail-to-Rail Rail-to-Rail
Unity-Gain Stability Yes Yes Yes Yes
Ordering or Temperature Distinction Industrial-grade tube ordering code Tape-and-reel ordering option #PBF ordering suffix Broader characterized temperature range

Bảo phân biệt quan trọng

  • Combines low noise with high closed-loop bandwidth (vsLT6203IS8#TR)
  • Broad temperature characterization is available in a related 8-SO option (vsLT6203IS8)
  • Two high-speed amplifiers reduce package count (vsLT6202IS8)

Ghi chú thiết kế

Route the two input nets, feedback paths, and output traces away from switching nodes and high-current power paths. Keep the feedback components adjacent to the relevant amplifier pins, minimize loop area, and use a continuous ground reference under the analog section. Because the LT6203IS8 offers 1.9 nV/√Hz noise density, even small coupling from adjacent converters can undermine the benefit of a low-noise amplifier.

Use the unity-gain-stable LT6203IS8 for direct buffer service, but evaluate every feedback network at the intended closed-loop gain. The 100 MHz gain-bandwidth product provides substantial bandwidth for moderate-frequency filters and signal conditioners, while parasitic capacitance around the inverting input can alter stability or peaking. Place high-value compensation capacitors and closely connected feedback resistors where they can be physically isolated from noisy and high-impedance nodes.

Do not interpret rail-to-rail input and output operation as an unlimited operating range. The input common-mode range, output swing, supply limits, load capability, and channel-to-channel behavior must remain within the manufacturer datasheet limits. Also verify the exact ordering suffix and temperature grade when substituting LT6203IS8#TR, LT6203IS8#PBF, or LT6203XS, since order format or characterization range may differ.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The LT6203IS8 is an industrial-temperature general-purpose amplifier rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established in the product information and remain unknown.

Dữ liệu được xác minh vào: 2026-11-19 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

LT6203IS8 datasheet LT6203IS8 pinout LT6203IS8 datasheet pdf LT6203IS8 equivalent LT6203IS8 replacement LT6203IS8 price LT6203IS8 stock Analog Devices LT6203IS8 LT6203IS8 100MHz op amp LT6203IS8 1.9nV noise LT6203IS8 SOIC-8 LT6203IS8 low noise amplifier LT6203IS8 vs LT6203XS LT6203IS8 application circuit

Các bộ phận và thuật ngữ liên quan

Analog Devices Linear Technology LT6203IS8 LT6203IS8#TR LT6203IS8#PBF LT6203XS LT6202IS8 LT6204IS8 LT6203 dual operational amplifier voltage-feedback amplifier signal-conditioning IC analog semiconductor rail-to-rail input rail-to-rail output unity-gain stable 1.9 nV/√Hz voltage-noise density 100 MHz gain-bandwidth product 25 V/μs slew rate 2.5 mA supply current 8-SO package surface mount SMD low-noise signal conditioning sensor preamplification
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ