Analog Devices

LTC1049CH Zero-Drift Operational Amplifier | Analog Devices

MPN: LTC1049CH ✓ Hoạt động
3,200,000 Vdss 8-terminal TO-5, round wire-lead package Package
MOQ: 1 |

LTC1049CH Tóm tắt

The Analog Devices LTC1049CH is a low-power, zero-drift operational amplifier with internal capacitors, offered in an 8-terminal round TO-5 package with wire-form leads. The device is intended for instrumentation, sensor signal conditioning, and precision analog applications where low offset voltage and low drift are more important than high bandwidth. It uses chopper or zero-drift techniques to reduce errors that normally change with time and temperature.

A zero-drift operational amplifier is a precision amplifier optimized for very low input-offset voltage and low drift over time. Unlike conventional amplifier designs whose offset error moves with temperature and aging, a zero-drift amplifier periodically corrects its own input error. The result is useful for bridge sensors, strain gauges, thermocouples, current measurements, and other applications where a small DC error can dominate the measurement result. The LTC1049 also includes internal capacitors, simplifying common application circuits.

The Analog Devices product information identifies the LTC1049 as a production low-power zero-drrift operational amplifier. The manufacturer describes versions in an 8-pin plastic dual-in-line package and an 8-pin SO package, while the LTC1049CH order code is identified as an 8-terminal TO-5 package with wire leads and industrial temperature grade. The package also includes an exposed metal case or lead configuration intended to support thermal conduction and, depending on the assembly, mechanical mounting.

Zero-drift architectures introduce practical considerations that differ from ordinary amplifier behavior. Their input errors are exceptionally small, but chopping can create ripple-related artifacts at internal correction frequencies. Circuit designers should account for the datasheet's input-noise and frequency-response characteristics, connect the specified internal-capacitor pins according to the manufacturer diagram, and provide stable supply bypassing. Layout should keep sensitive input traces short and avoid routing them beside switching nodes or high-current return paths.

Typical uses include low-level sensor amplification, portable measurement systems, process-control instrumentation, battery-powered equipment, and precision data acquisition. In a bridge or thermocouple circuit, the low drift helps preserve calibration accuracy over time, while the internal capacitors can reduce the number of external components required for stable operation. The amplifier should still be evaluated against the full signal range, output swing, noise bandwidth, supply voltage, and common-mode limits of the intended design.

For a new layout, use the pin-description table in the Analog Devices LTC1049 data sheet when assigning PCB tracks, and preserve the recommended grounding and bypass-capacitor connections. Do not substitute a different package or pinout without confirming the exact ordering code and electrical behavior. This page combines the manufacturer product information with engineering guidance for selecting, laying out, and sourcing the LTC1049CH.

For replacement decisions, compare the exact package, lead arrangement, input-offset behavior, supply range, output swing, and capacitor requirements. A similar amplifier function alone does not establish a drop-in replacement because the physical mounting and pinout of the 8-lead TO-5 package are central to PCB compatibility.

Bộ thay thế dễ dàng lắp đặt cho LTC1049CH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

LTC1049CH Tỷ lệ tối đa & tính chất điện

Product Type Low-power zero-drift operational amplifier
Amplifier Topology Chopper, zero-drift
Number of Circuits 1 circuit
Hộp 8-terminal TO-5, round wire-lead package
Number of Terminals 8 terminals
Temperature Grade Industrial grade
Internal Capacitors Yes
Minimum Voltage Gain 3,200,000
Kiểu lắp đặt Through-hole

Cấu hình chân LTC1049CH

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Chân 1 [DATA_NEEDED: pin 1 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 2 [DATA_NEEDED: pin 2 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 3 [DATA_NEEDED: pin 3 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 4 [DATA_NEEDED: pin 4 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 5 [DATA_NEEDED: pin 5 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 6 [DATA_NEEDED: pin 6 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 7 [DATA_NEEDED: pin 7 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.
Chân 8 [DATA_NEEDED: pin 8 name] — Use the Analog Devices LTC1049 data-sheet pin-description diagram for the exact TO-5 terminal assignment.

Ứng dụng tiêu biểu

LTC1049CH phù hợp cho 6 Áp dụngs: Thermocouple Signal Conditioning, Bridge and Strain-Gauge Measurement, Precision Process Instrumentation, Portable Data Acquisition, Battery-Powered Sensor Interface, Low-Level Instrumentation Amplifier Front End.

🧩

Thermocouple Signal Conditioning

The LTC1049CH is well suited to amplifying thermocouple signals because thermocouple outputs can be only tens of microvolts per degree Celsius, making offset voltage and drift comparable to the measurement signal. Its zero-drift architecture reduces time- and temperature-dependent input error, while the internal capacitors can simplify the amplifier configuration. A practical design should use short, protected input routes, stable mechanical mounting, and a verified cold-junction compensation network.

🏭

Bridge and Strain-Gauge Measurement

The LTC1049CH can condition low-level bridge or strain-gauge signals where millivolt-per-volt changes are much smaller than the amplifier's input offset would be without drift correction. Its zero-drift operation helps preserve measurement stability over time, and the internal capacitors assist common differential amplifier configurations. Layout must minimize thermoelectric voltages at copper-to-lead junctions because the manufacturer warns that package-induced drift can exceed the circuit's intrinsic drift specification.

🏭

Precision Process Instrumentation

The LTC1049CH is applicable to process-control front ends that measure small differential signals from sensors while operating from limited power. Its low-power zero-drift characteristics help reduce both power consumption and time-dependent measurement error. Engineers should confirm the available supply range, output swing, common-mode limits, and noise bandwidth against the sensor and transmitter requirements, then follow the manufacturer bypass and grounding recommendations.

📱

Portable Data Acquisition

The LTC1049CH fits portable or battery-powered data-acquisition systems that need accurate DC measurements without continuously operating a higher-bandwidth amplifier. The low-power operating concept is valuable in portable equipment, while zero-drift correction reduces calibration drift between measurement intervals. The through-hole TO-5 package requires more board area than a surface-mount amplifier, so designers should account for that mechanical tradeoff before selecting the CH ordering code.

⚡

Battery-Powered Sensor Interface

The LTC1049CH can serve as the low-power input stage for a battery-operated sensor interface when offset drift dominates the error budget. Its internal capacitors reduce the need for some external compensation components, and its low-power design is compatible with portable measurement concepts. The implementation should still include supply decoupling, input-overvoltage protection, and an assessment of whether the amplifier's quiescent current meets the system's duty-cycle budget.

📡

Low-Level Instrumentation Amplifier Front End

The LTC1049CH can form the first stage of a low-level instrumentation front end when very small differential signals require low offset and drift. Its single-amplifier structure supports custom gain networks, while the internal-capacitor option simplifies selected configurations. Before implementation, verify the exact gain-bandwidth response, noise density, input common-mode range, and stability requirements so that the precision DC behavior is not compromised by the intended signal bandwidth.

Tóm tắt các sản phẩm được đề xuất

LTC1049 Same zero-drift amplifier family in another package Được sử dụng trong: Thermocouple Signal Conditioning, Bridge and Strain-Gauge Measurement, Precision Process Instrumentation, Portable Data Acquisition, Battery-Powered Sensor Interface, Low-Level Instrumentation Amplifier Front End
What is the LTC1049CH?
The LTC1049CH is a single-circuit, low-power zero-drift operational amplifier with internal capacitors, manufactured by Analog Devices in an 8-terminal TO-5 package. According to the Analog Devices LTC1049 product page, the device is intended to improve DC performance and reduce power consumption compared with conventional operational amplifiers. Its zero-drift architecture is useful where offset voltage and drift would otherwise limit measurement accuracy.
What is the LTC1049CH pinout?
The LTC1049CH uses an 8-terminal round TO-5 wire-lead package, and its terminal assignments must be taken from the Analog Devices LTC1049 data-sheet pin-description diagram. The manufacturer identifies the package as an 8-lead TO-5 configuration for the CH ordering code. Before laying out a PCB, map every lead against that diagram, including the connections for the amplifier inputs, output, supply pins, and internal-capacitor pins.
Where can I download the LTC1049CH datasheet PDF?
The official Analog Devices LTC1049 data sheet is available at https://www.analog.com/media/en/technical-documentation/data-sheets/1049fb.pdf. The manufacturer data sheet contains the electrical characteristics, ordering information, internal-capacitor details, and package drawings needed to assign the LTC1049CH pins. The official product page at analog.com/en/products/ltc1049.html provides a complementary entry point for documentation and product resources.
What applications are suitable for the LTC1049CH?
The LTC1049CH is suitable for low-level sensor amplification, bridge transducers, thermocouples, process instrumentation, portable measurement systems, and low-power data acquisition. Its zero-drift architecture is intended to reduce time- and temperature-dependent offset errors, while its internal capacitors simplify certain amplifier configurations. The final application must still satisfy the device's supply, input-range, output-swing, noise, and stability requirements.
Why does package-induced drift matter for the LTC1049CH?
Package-induced drift can dominate the LTC1049CH's total observed offset change because the copper and kovar junction formed by a lead contacting a PCB trace can generate a thermal EMF of approximately 35 microvolts per degree Celsius. The Analog Devices data sheet states that this is about 300 times the amplifier's maximum drift specification. Stable mechanical mounting and controlled board temperature therefore materially improve precision performance.
What is the power consumption of the LTC1049CH?
The Analog Devices product information classifies the LTC1049CH as a low-power operational amplifier, but an exact supply-current value for this ordering code is not stated on the product-page excerpt. Use the supply-current and quiescent-current rows in the manufacturer data sheet when sizing the power budget. The device's internal capacitors and zero-drift architecture should not be treated as permission to ignore the operating-current limit of the selected supply.
Can the LTC1049CH replace a conventional operational amplifier?
The LTC1049CH can serve as a plug-in replacement for many standard operational amplifiers because the manufacturer describes improved DC performance and substantial power savings, but mechanical and functional equivalence still require confirmation. Check the 8-terminal TO-5 lead arrangement, pinout, supply voltage, common-mode range, output swing, stability requirements, and internal-capacitor connections. Verify every connection against the data sheet before modifying an existing board.
What is the best drop-in replacement for the LTC1049CH?
The LTC1049CH itself remains the identified production-grade option in the manufacturer documentation, and no independently verified drop-in replacement was established by the available cross-reference results. A valid replacement must use the same 8-terminal TO-5 footprint and pin assignments while meeting the input-offset, drift, bandwidth, supply, output-swing, and stability requirements. Request a quote for the exact LTC1049CH rather than approving an unverified substitute.
Can LTC1049CH be used with a thermocouple?
The LTC1049CH can amplify thermocouple signals because its zero-drift operation reduces offset changes that are significant at microvolt-level inputs. Analog Devices includes a thermocouple application discussion in the available support material. Nevertheless, a production design should also verify cold-junction compensation, input protection, lead polarity, common-mode limits, and the very low offset error needed across the full measurement temperature range.
Is LTC1049CH suitable for battery-powered equipment?
The LTC1049CH is suitable for battery-powered equipment when its low-power characteristic is sufficient for the measurement duty cycle. Its 8-terminal TO-5 package is larger than modern surface-mount amplifier packages, so board area and mechanical mounting must be included in the design tradeoff. Confirm exact supply current and operating temperature limits in the manufacturer data sheet before setting the battery-life budget.
Where can I buy the LTC1049CH online?
Use the Request a Quote form on this XAIPART product page to ask about LTC1049CH availability, current lead time, and minimum order quantity. The exact industrial-temperature TO-5 ordering code is important when requesting a quote because package and temperature suffixes define the delivered device. Do not substitute a different LTC1049 package code without confirming its mechanical and electrical requirements.
What is the price of the LTC1049CH?
Current LTC1049CH commercial terms should be requested through the Request a Quote form on this XAIPART product page. A quote request should identify the exact MPN LTC1049CH and the required delivery quantity so the manufacturer can confirm current lead time, stock status, and applicable commercial parameters. The exact ordering code is essential because other LTC1049 package suffixes are not mechanically interchangeable.
What is the lead time for the LTC1049CH?
The current lead time for LTC1049CH should be confirmed through the Request a Quote form on this page. Include the requested quantity and intended delivery date in the request. Because Analog Devices identifies the LTC1049 family as production, the part remains an active sourcing target, while exact availability can vary by package suffix, manufacturing schedule, and order volume.
Is the LTC1049CH currently in stock?
Current LTC1049CH stock status should be checked through the Request a Quote form on this page rather than inferred from a general distributor landing page. Request the exact MPN and quantity, and specify whether reel, tray, tube, or other approved delivery format is required. The LTC1049CH identifier includes an industrial temperature grade and 8-terminal TO-5 package, so those details should remain unchanged in the request.
What can replace the LTC1049CH?
A true replacement for the LTC1049CH must be pin-compatible in the 8-terminal TO-5 package and comparable in offset voltage, drift, bandwidth, supply range, common-mode range, output swing, and capacitor requirements. No verified drop-in substitute was identified in the available cross-reference results, so do not treat a generic precision amplifier as equivalent. Request the exact LTC1049CH through the quote form or validate any proposed substitute against both data sheets and the original PCB.
When should I choose the LTC1049CH instead of a conventional operational amplifier?
Choose the LTC1049CH when the measured signal is small enough that input offset voltage and drift would dominate accuracy and when low quiescent power is valuable. It is particularly appropriate for bridge sensors, strain gauges, thermocouples, and low-frequency instrumentation. A conventional amplifier may be preferable for wider bandwidth, simpler compensation, lower cost, or a surface-mount package, provided the offset-drift contribution remains acceptable.
What are the key specifications of the LTC1049CH engineers should know?
The LTC1049CH is a one-circuit, industrial-grade, low-power zero-drift operational amplifier with internal capacitors in an 8-terminal TO-5 wire-lead package. Analog Devices identifies a minimum voltage gain of 3,200,000 for the family and describes its ability to replace many standard operational amplifiers with improved DC performance. The manufacturer also highlights package-induced thermal drift, making mechanical stability and thermal design important.

Dữ liệu tham khảo kỹ thuật cho LTC1049CH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LTC1049CH when the input signal is small, drift over time or temperature would dominate the error, and a wired 8-terminal TO-5 package is acceptable. It is particularly appropriate for thermocouples, bridge sensors, low-level process measurement, and portable instrumentation. The zero-drift architecture and internal capacitors provide a strong functional fit, although package-induced thermal EMF and PCB cleanliness remain important. A conventional operational amplifier may be preferable when the signal requires greater bandwidth, lower cost, a smaller surface-mount footprint, or simpler compensation. Do not approve a replacement unless its lead arrangement, pinout, offset and drift performance, supply range, common-mode range, output swing, bandwidth, and internal-capacitor configuration have all been verified. For an existing LTC1049 board, request the exact CH ordering code and confirm its industrial temperature grade, TO-5 package, and mechanical dimensions before committing to a production order.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 8-terminal TO-5
Brand Analog Devices
Product Type Low-power zero-drift operational amplifier
Number of Circuits 1 circuit
Internal Capacitors Yes
Temperature Grade Industrial grade
Minimum Voltage Gain 3,200,000

Bảo phân biệt quan trọng

  • Very low drift for precision measurement (vsConventional precision operational amplifier)
  • Simplified application network (vsConventional precision operational amplifier without internal capacitors)
  • Production availability of the identified family (vsUnverified legacy substitute)

Ghi chú thiết kế

Do not assume that a generic precision amplifier is a drop-in replacement. The LTC1049CH uses an 8-terminal round TO-5 package, and the exact lead and pin assignments must be checked in the manufacturer data-sheet diagram. Also review the internal-capacitor connections, supply limits, common-mode range, output swing, and stability requirements before approving a substitute.

Package-induced drift can dominate the LTC1049's specified drift. The manufacturer states that the copper and kovar junction at a lead-to-PCB-trace interface can generate approximately 35 microvolts per degree Celsius, about 300 times the maximum drift specification. Reduce thermal gradients with stable mechanical mounting, careful board assembly, and separation from heat-producing components.

Keep the input leads and signal traces short, and avoid placing sensitive input routes beside switching nodes, regulators, or high-current return paths. Follow the data sheet's recommended supply bypassing and grounding arrangement. Because the internal-capacitor pins are part of the application configuration, preserve their specified connections rather than treating them as unused leads.

Decouple the supply close to the device and verify the exact quiescent current before designing a battery-powered system. The LTC1049CH is marketed as a low-power part, but the exact supply-current limit and operating range should be taken from the manufacturer electrical-characteristics table. Confirm that the selected supply also supports the required common-mode and output-voltage conditions.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available manufacturer product-page excerpt does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The LTC1049CH is identified as industrial grade, but industrial temperature grade is not equivalent to AEC-Q100 qualification.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ltc1049 datasheet LTC1049CH datasheet LTC1049CH pinout LTC1049CH datasheet PDF Analog Devices LTC1049CH LTC1049CH TO-5 package LTC1049CH zero-drift amplifier LTC1049CH thermocouple amplifier LTC1049CH drop-in replacement LTC1049CH equivalent LTC1049CH price LTC1049CH stock What can replace LTC1049CH

Các bộ phận và thuật ngữ liên quan

Analog Devices Linear Technology LTC1049 LTC1049CH zero-drift operational amplifier chopper amplifier precision amplifier operational amplifier integrated circuit semiconductor instrumentation amplifier front end thermocouple signal conditioning bridge sensor strain gauge input offset voltage input offset drift package-induced thermal drift thermoelectric voltage internal capacitors TO-5 package through-hole mounting industrial temperature grade low-power measurement process instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ