M2GL010-VFG400 - 12K Low-Power IGLOO2 FPGA | Microchip
MPN: M2GL010-VFG400 ✓ Hoạt độngM2GL010-VFG400 Tóm tắt
An FPGA is a programmable semiconductor in the broader logic-device and semiconductor hierarchy. Its configurable logic fabric can implement digital control, interface, protocol, and signal-processing functions that would otherwise require several fixed-function ICs. The IGLOO2 family combines this reprogrammable fabric with embedded flash, SRAM, and communications interfaces, making it useful for compact industrial, communications, consumer, and system-management designs.
The fourth-generation flash-based IGLOO2 fabric provides nonvolatile configuration storage, while the device includes a high-performance memory subsystem with 32 KB embedded SRAM and multiple DMA controllers. The 195 available I/O positions support external interfaces and board-level integration. Because configuration is retained in flash, the M2GL010 can resume its programmed function after power is restored without requiring an external configuration loader.
Mouser identifies the M2GL010-VFG400 as an IGLOO2 low-density FPGA with 12K logic elements, while Microchip describes the M2GL010 family as being in production. Its intended use cases include bridging functions, input/output expansion and conversion, system management, and secure connectivity. These applications benefit from integrating programmable control logic close to external interfaces while limiting board area.
For new hardware, the key trade-off is flexibility versus a fixed-function MCU or CPLD. The FPGA supports parallel logic, adaptable interfaces, and in-system updates, but programming tools, timing validation, and board-level power planning require additional engineering effort. Designers should verify every ball assignment against the Microchip pin-information guide before schematic capture or PCB routing.
This page consolidates verified distributor and manufacturer information, application guidance, package details, and same-family replacement options. It also distinguishes a genuine 400-LFBGA drop-in candidate from related IGLOO2 devices offered in smaller packages, preventing package-mismatch substitutions.
Bộ thay thế dễ dàng lắp đặt cho M2GL010-VFG400 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M2GL010-VFG400 (cùng hình factor và footprint) — khác nhau ở Logic Elements.
M2GL010-VFG400I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL010-1VFG400
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL010-VF400
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M2GL010-VFG400 Tỷ lệ tối đa & tính chất điện
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 12K LE |
| Programmable Cells | 12,084 cells |
| Core Voltage | 1.2 V |
| Hộp | 400-LFBGA |
| I/O Count | 195 I/O |
| Configuration Memory | 933,888 bits |
| Embedded SRAM | 32 KB |
| Configuration Technology | Fourth-generation flash-based FPGA fabric |
| DMA Controllers | Multiple DMA controllers |
| Communications Interfaces | High-performance communications interfaces |
| Typical Applications | Bridging, I/O expansion and conversion, system management, and secure connectivity |
| Production Status | In production |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân M2GL010-VFG400 400-lfbga
Cấu hình chân cho M2GL010-VFG400 (400-lfbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL010-VFG400.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL010-VFG400 phù hợp cho 6 Áp dụngs: Industrial Interface Conversion, Secure Connectivity Control, System Management and Monitoring, Communication Equipment Control, Programmable Signal Conditioning, Consumer and IoT Control Module.
Industrial Interface Conversion
The M2GL010-VFG400 fits industrial interface conversion because it combines 12K logic elements with 195 I/O positions in a 400-LFBGA package. Engineers can place parallel-to-serial logic, protocol adaptation, command decoding, and data conditioning close to the relevant connector or transceiver. Its fourth-generation flash-based configuration retains the programmed logic after power restoration, while 32 KB of embedded SRAM supports temporary buffering and multiple DMA controllers assist data movement. The principal engineering consideration is that every external interface standard and bank voltage must be verified against the manufacturer datasheet and pin guide before PCB implementation.
Được đề xuất
Secure Connectivity Control
M2GL010-VFG400 is suitable for secure-connectivity control because its programmable flash-based logic can implement state machines, authentication sequencing, protocol framing, and I/O arbitration without relying on a fixed-function controller. The 12K-LE fabric provides 12,084 programmable cells, while the 400-LFBGA package exposes 195 I/O positions for integration with sensors, transceivers, and secure elements. Multiple DMA controllers and 32 KB of embedded SRAM help separate data transfer from control logic. Security-specific claims still depend on the selected algorithm, implementation, key-storage architecture, and system threat model rather than the FPGA family name alone.
Được đề xuất
System Management and Monitoring
The M2GL010-VFG400 can implement centralized system-management logic for board supervision, power sequencing, fault latching, watchdog behavior, and status aggregation. Its 12K-LE flash FPGA fabric allows monitoring rules to be changed for different board revisions, and 195 I/O positions provide extensive connectivity to regulators, sensors, and supervisory components. The 1.2 V core and integrated flash configuration support autonomous operation after reset. Designers should account for startup timing, input thresholds, reset behavior, and the separation of safety-critical decisions from ordinary monitoring tasks.
Được đề xuất
Communication Equipment Control
M2GL010-VFG400 is appropriate for low-rate communication equipment requiring adaptable framing, buffering, and control logic around external line drivers. The 195 available I/O positions allow multiple parallel data paths, status signals, and protocol interfaces to converge on one programmable device, while 32 KB of embedded SRAM provides a working buffer for packet assembly. Multiple DMA controllers can transfer data efficiently between on-chip memory and peripherals. The 400-LFBGA footprint demands careful ball assignment, power delivery, and signal-integrity planning, especially where communications channels operate near the device's supported I/O limits.
Được đề xuất
Programmable Signal Conditioning
M2GL010-VFG400 can implement programmable logic for signal conditioning, parallel data capture, test-pattern generation, and FPGA-based fixture control. Its 12,084 programmable cells provide substantially more parallel logic than a small general-purpose MCU, and the 195 I/O positions allow direct connection to sensors, logic analyzers, or programmable test equipment. Embedded SRAM and DMA controllers make sequential pipelines practical without external memory. Clocking, input thresholds, output drive, and timing margins must be established from the official data sheets because the verified extract does not provide those detailed electrical limits.
Được đề xuất
Consumer and IoT Control Module
M2GL010-VFG400 supports compact control logic in IoT and consumer modules that need multiple low-speed interfaces, nonvolatile configuration, and field-update flexibility. The 12K-LE IGLOO2 fabric can coordinate sensors, indicators, local buses, and host communication, while the 400-LFBGA package offers 195 I/O positions for board-level integration. Flash-based configuration allows the configured function to persist across power cycles, and 32 KB of SRAM supports short-lived buffering. For low-cost designs, the main trade-off is the fine-pitch BGA assembly requirement compared with smaller leaded packages.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL010-VFG400 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL010-VFG400I | M2GL010-1VFG400 | M2GL010-VF400 |
|---|---|---|---|---|
| Package | 400-LFBGA | 400-LFBGA - same | 400-LFBGA - same | 400-LFBGA - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Elements | 12K LE | 12K LE | 12K LE | 12K LE |
| Distinct Suffix | Commercial ordering suffix | I suffix; temperature or qualification grade differs | Additional 1 prefix; speed or ordering option differs | Package code omits G |
| Availability Listing | DigiKey, Mouser, and Octopart listings verified | DigiKey listing verified | Replacement-search listing verified | Site MPN listing verified |
Bảo phân biệt quan trọng
- Large I/O availability in the M2GL010 device (vsM2GL010-VF256)
- Qualified suffix option for temperature-sensitive sourcing (vsM2GL010-VFG400)
- On-chip memory and transfer resources (vsM2GL010-VF400)
Ghi chú thiết kế
Use Microchip's IGLOO 2 Packaging and Pin Descriptions User Guide as the controlling source for the 400-ball footprint, bank assignments, and package drawing. Do not derive the layout from the target MPN alone: verify the exact VFG400 package dimensions, ball matrix, power balls, ground balls, and exposed thermal requirements. A small change in the package-code suffix can invalidate footprint geometry, escape routing, and assembly clearances even when logic resources remain the same.
Plan the 1.2 V core rail and all supported external I/O rails as separate power domains until the manufacturer's bank tables confirm otherwise. Place local high-frequency decoupling directly at the relevant supply and ground balls, provide adequate bulk energy near the device, and isolate noisy external loads from sensitive logic. The verified extract does not provide current limits or voltage tolerances, so do not size regulators and thermal copper from unverified assumptions.
Assign I/O standards from the official bank and pin tables, then route each interface according to its voltage, edge-rate, and timing requirements. The 400-LFBGA package offers 195 I/O positions, but logical I/O availability does not guarantee that every ball supports every voltage standard simultaneously. Confirm simultaneous pin constraints, bank-sharing restrictions, clock-capable inputs, and dedicated configuration pins before finalizing the schematic.
Do not treat M2GL010-VFG400I, M2GL010-1VFG400, or M2GL010-VF400 as automatic substitutions merely because their ordering codes look similar. Compare the speed grade, temperature qualification, electrical characteristics, configuration behavior, and exact package drawing. Also avoid using a generic 400-ball library when the manufacturer provides a device-specific footprint; BGA ball counts do not guarantee identical ball maps, pad sizes, or assembly requirements.
Thông tin tuân thủ
The supplied manufacturer and distributor search results do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. No compliance claim has been inferred from the family name or package.
