M2GL060T-FG484 - 56.5K LEs, 267 I/O Flash FPGA | Microchip
MPN: M2GL060T-FG484 ✓ Hoạt độngM2GL060T-FG484 Tóm tắt
A flash FPGA is a programmable-logic semiconductor whose configuration memory is embedded on the die. Unlike a CPLD, an FPGA provides substantially greater logic capacity and supports parallel datapath, state-machine, interface-conversion, and signal-processing architectures. The IGLOO2 family is positioned within the broader hierarchy of FPGA devices, programmable logic ICs, and semiconductor devices for embedded control and interface acceleration.
The M2GL060T-FG484 provides 56.5K logic elements and 267 I/O, making it useful for consolidating multiple fixed-function interface blocks onto one programmable device. Its embedded flash allows the configuration to be retained in the package, while the embedded SRAM supports buffering, datapath storage, and general-purpose logic. The 484-BGA format offers a high pin count for dense external connectivity and can help reduce the number of discrete interface components in bridge and protocol-conversion designs.
Typical deployments include Gigabit Ethernet control planes, dual PCI Express control-plane functions, protocol bridging, I/O expansion, bus-width conversion, system management, secure connectivity, and video or image-processing pipelines. In these applications, the FPGA can implement deterministic parallel logic while the integrated flash simplifies standalone configuration management.
A primary design consideration is the 484-ball BGA layout. PCB escape routing, via-in-pad or via-under-ball requirements, soldering process capability, and thermal performance must be validated before layout begins. Designers should also verify the exact supported I/O standards, voltage domains, clocking resources, configuration requirements, and power rails against the manufacturer datasheet for the selected board revision.
This page combines the device architecture, verified package and capacity details, drop-in package alternatives, application guidance, and practical PCB considerations into an engineering-focused resource. It helps designers distinguish suffix and qualification options without changing the physical 484-ball footprint and compare same-density IGLOO2 alternatives before committing to a layout.
Bộ thay thế dễ dàng lắp đặt cho M2GL060T-FG484 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
M2GL060T-1FG484
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060T-1FG484I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060T-1FG484M
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060T-FGG484
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL060T-FG484 Tỷ lệ tối đa & tính chất điện
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 56.5K LEs |
| I/O Count | 267 I/O |
| Embedded Memory | 32 KB SRAM |
| Configuration Memory | Embedded flash |
| Hộp | 484-BGA |
| Lead Count | 484 leads |
| Package Ball Pitch | 1.0 mm |
| Package Body Dimension | 2.44 mm |
| Programmable Logic Architecture | IGLOO2 |
| Kiểu lắp đặt | Surface mount |
| Programmable Logic Type | Flash-configured FPGA |
Hướng dẫn cấu hình chân M2GL060T-FG484 2.44 mm
Cấu hình chân cho M2GL060T-FG484 (2.44 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL060T-FG484.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL060T-FG484 phù hợp cho 6 Áp dụngs: Gigabit Ethernet Control Plane, PCI Express Control-Plane Logic, Protocol Bridging and Bus Conversion, Video and Image Processing, Industrial I/O Expansion, Secure Connectivity and System Management.
Gigabit Ethernet Control Plane
The M2GL060T-FG484 fits a Gigabit Ethernet control-plane implementation because its 56.5K logic elements can support parallel protocol logic, packet handling, buffering control, and system-management functions in one flash FPGA. The 267 I/O provide substantial connectivity for status, interrupt, configuration, and external bus signals. Designers can implement deterministic control traffic separately from a dedicated network interface when system partitioning permits. Embedded flash retains the network-control configuration, while 32 KB of SRAM supports local datapath storage and packet metadata. Before schematic capture, verify the required Ethernet interface implementation, supported clock sources, I/O voltage domains, and timing from the IGLOO 2 family documentation.
Được đề xuất
PCI Express Control-Plane Logic
The M2GL060T-FG484 can consolidate PCI Express control-plane functions, interface monitoring, register translation, and auxiliary logic within a 56.5K-LE programmable-logic fabric. Its flash configuration supports autonomous startup, and 32 KB of SRAM can serve buffer, descriptor, or control-state storage. The 267 available I/O make the device relevant to designs that need extensive parallel status and arbitration signals alongside compact serial-interface logic. The practical benefit is reducing separate glue logic and allowing protocol behavior to be revised through FPGA programming. Confirm lane capability, signaling rate, reference-clock requirements, input voltage tolerance, and reset strategy against the exact device documentation before implementation.
Được đề xuất
Protocol Bridging and Bus Conversion
The M2GL060T-FG484 is appropriate for protocol bridges that translate parallel and serial interfaces, bridge clock domains, or coordinate multiple bus masters. A 56.5K-LE device provides enough parallel logic for state machines, FIFO control, arbitration, and data-width conversion without requiring several fixed-function bridge ICs. The 32 KB embedded SRAM can be partitioned for FIFO storage, while embedded flash preserves bridge configuration. The 484-BGA package also offers 267 I/O for data buses and control signals. Designers should evaluate timing closure, supported I/O standards, clock-domain crossing structure, and maximum interface rates before freezing the implementation.
Được đề xuất
Video and Image Processing
The M2GL060T-FG484 can support parallel video or image-processing pipelines that benefit from deterministic programmable logic, including pixel routing, thresholding, color transformation, line and frame timing, and sensor-interface adaptation. The 56.5K-LE fabric allows multiple parallel datapaths to be implemented concurrently, while embedded SRAM provides temporary line, block, or pipeline storage. Its 267 I/O is useful for parallel sensor and display interfaces where several control and data buses must converge on one component. The device should be selected against the required pixel clock, data width, latency, memory bandwidth, and I/O voltage. Clocking and timing closure are critical, so use the family resources and supported interface configurations as the basis for architecture selection.
Được đề xuất
Industrial I/O Expansion
The M2GL060T-FG484 can replace several CPLDs, latches, and interface adapters in an industrial I/O-expansion design by implementing configurable logic for discrete inputs, outputs, counters, interlocks, and status reporting. Its 56.5K logic elements and 267 I/O provide a higher channel count than a small programmable logic device, while embedded flash retains the control configuration. The device is particularly useful when multiple communication formats and timing domains must be coordinated. Industrial designs must still verify operating-temperature grade, isolation boundaries, input thresholds, output drive characteristics, and functional-safety system requirements. The family documentation should be used to confirm every voltage domain and I/O standard before schematic release.
Được đề xuất
Secure Connectivity and System Management
The M2GL060T-FG484 can consolidate secure-connectivity control, key-management sequencing, boot coordination, status monitoring, and system-management tasks in one programmable device. Embedded flash allows the control configuration to remain with the device, while the 56.5K-LE fabric can implement state machines, protocol checks, and fault-response logic. Its 267 I/O offers many connections for sensors, alarms, sequencing controls, and secure-element communication. This consolidation reduces discrete glue logic and allows updates by reprogramming the FPGA configuration. Security-critical implementations should add dedicated cryptographic hardware where required, verify reset and secret-storage behavior, and confirm that the selected grade supports the deployment temperature and reliability environment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL060T-FG484 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL060T-1FG484 | M2GL060T-1FG484I | M2GL060T-1FG484M | M2GL060T-FGG484 |
|---|---|---|---|---|---|
| Package | 484-BGA | 484-BGA | 484-BGA | 484-BGA | 484-BGA |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Logic Elements | 56.5K LEs | 56.5K LEs | 56.5K LEs | 56.5K LEs | 56.5K LEs |
| Configuration Memory | Embedded flash | Embedded flash | Embedded flash | Embedded flash | Embedded flash |
| Ordering Grade | FG484 grade | -1FG484 grade | -1FG484I grade | -1FG484M grade | FGG484 grade |
Bảo phân biệt quan trọng
- Retains the same high-density 484-BGA footprint across identified ordering alternatives (vsM2GL060T-1FG484)
- Combines programmable logic with retained embedded configuration (vsM2GL060T-1FG484I)
- Provides high I/O density for parallel interface consolidation (vsM2GL060T-1FG484M)
Ghi chú thiết kế
Treat the 484-BGA as a constrained-routing component from the first board-layout stage. Use the Microchip package drawing and recommended land pattern to define the ball grid, pad dimensions, solder-mask definition, and assembly process. A 1.0 mm pitch leaves limited escape space between power, ground, and high-speed signals, so reserve escape vias and layer transitions near the device rather than after logic placement is complete. Review assembly capability, inspection access, and rework limitations before releasing the PCB.
Build the power tree from the exact rail assignments in the IGLOO 2 pin-description table, including every required supply and ground ball. Decoupling must be placed directly at the relevant package balls with short return paths, while the board should provide low-impedance planes capable of handling expected dynamic current. Do not infer rail values or sequencing from the device name; verify them in the family datasheet and evaluate the selected design for simultaneous logic and I/O activity.
The most common procurement mistake is treating every IGLOO2 ordering suffix as electrically identical. Compare the M2GL060T-FG484 against any proposed 484-BGA alternative at the ordering-code level, checking speed grade, temperature range, qualification, package revision, and marking. Also confirm that the programmed bitstream is compatible with the selected suffix and that the original design did not rely on undocumented ball assignments. Footprint compatibility alone does not establish drop-in operational equivalence.
Use the manufacturer-defined clock, reset, configuration, and user-I/O constraints as the basis for signal-integrity analysis. Route high-speed or externally exposed interfaces away from dense escape regions, provide continuous reference planes, and control impedance through the actual stack-up. For clocked datapaths, budget skew and jitter in the timing design rather than treating the nominal logic-element count as the only complexity measure. Validate the final interface behavior through simulation and post-layout timing analysis.
Thông tin tuân thủ
Compliance attributes were not stated in the manufacturer or channel records used for this product.
