MAX1036EKA+TG002 - 8-Bit 4/12-Ch 2-Wire Serial ADC | Maxim
MPN: MAX1036EKA+TG002 ✗ Cuối đờiMAX1036EKA+TG002 Tóm tắt
An SAR (Successive Approximation Register) ADC is a class of data converter that uses a binary-search algorithm combined with an internal DAC to resolve analog inputs in N conversion cycles for N-bit precision. The MAX1036 family integrates a track-and-hold amplifier, internal voltage reference, internal oscillator, and an I2C-compatible 2-wire serial interface (400 kHz Fast Mode and 1.7 MHz High-Speed Mode) into a single die, allowing direct connection to a microcontroller or processor without external precision components.
Key features include four analog inputs configurable as either 4 single-ended or 12 single-ended channels via software, an internal 2.048V reference (with the option to use an external reference up to AVDD), software-configurable unipolar/bipolar modes, low supply current, and an automatic power-down between conversions that drops consumption to microampere levels. The internal reference provides tight initial accuracy and low drift, simplifying BOM cost and PCB area.
Architecture is a charge-redistribution SAR with switched-capacitor input, supporting 0 to VREF input range. The 2-wire interface is I2C-compatible with address selection, enabling up to four MAX1036 devices on the same bus. AutoShutdown reduces average supply current to 200 uA at low throughput.
Typical applications include portable instrumentation, battery monitoring, system monitoring in servers and networking equipment, panel meters, and digital multimeters. The wide supply range (2.7V to 5.5V) and small SOT-23 footprint make it well-suited for space-constrained, low-power designs.
A design consideration: the SOT-23-8 package has a thermal resistance around 170 C/W; ensure decoupling with 0.1 uF and 1 uF capacitors close to AVDD, and route analog/digital grounds in a star-ground pattern to minimize digital switching noise coupling into analog inputs.
This page synthesizes distributor pricing, drop-in alternatives, application circuits and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho MAX1036EKA+TG002 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX1036EKA+TG002 (cùng hình factor và footprint) — khác nhau ở Resolution, Number of Input Channels, Package, Operating Temperature, Sampling Rate.
MAX1037EKA+T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX1036EKA+T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX1036LEKA+T
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
ADS7822PG4
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →ADS1110A6IDBVR
Liên hệ để biết giá
Xem tài liệu →MAX1036EKA+TG002 Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 8 bit |
| Number of Channels | 4 / 12 (single-ended, software-configurable) |
| Điện áp cung cấp | 2.7 V to 5.5 V |
| Tỷ lệ lấy mẫu | 94 ksps |
| Supply Current (Active) | 1.5 mA |
| Supply Current (AutoShutdown) | 200 uA (typical) |
| Internal Reference Voltage | 2.048 V |
| External Reference Input | Up to AVDD |
| Input Range | 0 V to VREF (unipolar); +/-VREF (bipolar) |
| Serial Interface | I2C-compatible 2-wire, 400 kHz Fast / 1.7 MHz High-Speed |
| Hộp | SOT-23-8 |
| Kiểu lắp đặt | Surface Mount |
| Nhiệt độ hoạt động | -40C to +85C |
| Architecture | SAR (Successive Approximation Register) |
| Cấp MSL | 1 |
| Trạng thái RoHS | Compliant |
Cấu hình chân MAX1036EKA+TG002
| Chân 1 | AIN3/SCL — Analog input 3 / I2C clock (function select via configuration register) |
| Chân 2 | AIN2/SDA — Analog input 2 / I2C data (function select via configuration register) |
| Chân 3 | AIN1 — Analog input 1 |
| Chân 4 | AVDD — Analog supply voltage (2.7V to 5.5V) |
| Chân 5 | GND — Ground |
| Chân 6 | REF — External reference input / bypass for internal 2.048V reference |
| Chân 7 | AIN0 — Analog input 0 |
| Chân 8 | AD0/CS — I2C address select / chip select |
Ứng dụng tiêu biểu
MAX1036EKA+TG002 phù hợp cho 6 Áp dụngs: Portable Battery-Powered Instrumentation, Server & Networking System Monitoring, Panel Meters and Digital Displays, Industrial Sensor Digitization, Digital Multimeter (DMM) Front-End, Automotive Sensor Cluster (Legacy).
Portable Battery-Powered Instrumentation
The MAX1036EKA+TG002's 2.7V to 5.5V supply range and 1.5 mA active current make it well-suited for portable, battery-powered instrumentation. The internal 2.048V reference eliminates the need for an external precision reference, and AutoShutdown reduces average current to microampere levels between conversions, extending battery life. The 8-pin SOT-23-8 footprint conserves PCB area, making it ideal for handheld multimeters, field sensors, and portable data loggers where resolution needs are moderate.
Được đề xuất
Server & Networking System Monitoring
The MAX1036EKA+TG002's 4-channel input and 2-wire I2C interface make it well-suited for monitoring multiple analog rails (temperature, voltage, current) in server and networking equipment. The 94 ksps throughput is more than sufficient for housekeeping and supervisory monitoring at sub-Hz sample rates. Up to four devices can share a single I2C bus via the hardware address pin. The 2.048V internal reference is ratiometric to the AVDD supply, simplifying calibration when monitoring supply rails.
Được đề xuất
Panel Meters and Digital Displays
The MAX1036EKA+TG002's 8-bit resolution and 4-channel input suit panel-meter applications measuring voltage, current, temperature, and pressure. The 2.7V to 5.5V supply range and small SOT-23-8 footprint allow integration into compact meter housings. The internal 2.048V reference provides sufficient accuracy for industrial panel-meter display resolutions. Bipolar input mode enables direct measurement of shunt currents and differential signals without external signal conditioning.
Được đề xuất
Industrial Sensor Digitization
The MAX1036EKA+TG002's 4 single-ended input channels directly accept signals from industrial sensors (thermistors, photocells, potentiometers, 4-20 mA loop resistors). The 8-bit resolution and 2.048V internal reference suit sensor output digitization for HVAC controllers, factory automation endpoints, and process-control equipment. The wide -40C to +85C operating temperature range supports industrial environment deployments. AutoShutdown keeps average power below 1 mW for always-on sensor nodes.
Được đề xuất
Digital Multimeter (DMM) Front-End
The MAX1036EKA+TG002's 4-channel input and bipolar measurement mode (with +/-VREF range) suit low-cost handheld digital multimeter designs measuring DC voltage up to 2.048V (extendable via input dividers). The 8-bit resolution supports counts-of-200 DMM displays. The internal 2.048V reference provides adequate stability for general-purpose measurements, and the 2.7V to 5.5V supply range allows single-cell Li-ion or 9V-battery operation via boost or linear regulators.
Được đề xuất
Automotive Sensor Cluster (Legacy)
The MAX1036EKA+TG002's wide operating temperature range (-40C to +85C) and 2.7V to 5.5V supply range support legacy automotive sensor cluster applications. Note: the part is not AEC-Q100 qualified, so use the MAX1037EKA+T-Q or equivalent automotive-qualified part for new designs. The 4-channel input allows monitoring of fuel-level, oil-pressure, and temperature sensors via a single ADC. The internal reference and 2-wire interface minimize external component count.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX1036EKA+TG002 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX1037EKA+T | MAX1036EKA+T | MAX1036LEKA+T | ADS7822PG4 | ADS1110A6IDBVR |
|---|---|---|---|---|---|---|
| Package | SOT-23-8 | SOT-23-8 - same | SOT-23-8 - same | SOT-23-8 - same | SOT-23-8 - same | SOT-23-6/8 - same |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Texas Instruments | Texas Instruments |
| Resolution | 8 bit | 10 bit | 8 bit | 8 bit | 8 bit | 16 bit |
| Number of Channels | 4 single-ended | 4 single-ended | 4 single-ended | 4 single-ended | 4 single-ended (or 2 differential) | 1 differential |
| Sampling Rate | 94 ksps | 94 ksps | 94 ksps | 94 ksps | 200 kHz interface, ~50 ksps | 0.128 ksps (configurable) |
| Supply Voltage | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V | 2.7V to 5.5V (low-voltage) | 2.7V to 5.5V | 2.7V to 5.5V |
| Internal Reference | 2.048V | 2.048V | 2.048V | 2.048V | External only | 2.048V internal |
| Serial Interface | I2C 2-wire, 400 kHz / 1.7 MHz | I2C 2-wire, 400 kHz / 1.7 MHz | I2C 2-wire, 400 kHz / 1.7 MHz | I2C 2-wire, 400 kHz / 1.7 MHz | I2C, 200 kHz | I2C, up to 400 kHz |
| Lifecycle Status | Obsolete | Active | Obsolete | Active | Obsolete (check TI) | Active |
Bảo phân biệt quan trọng
- Pin-compatible upgrade to 10-bit resolution (vsMAX1036EKA+T)
- Higher-speed I2C interface (vsADS7822PG4)
- Integrated 2.048V internal reference (vsADS7822PG4)
Ghi chú thiết kế
Decouple AVDD with a 0.1 uF X7R ceramic capacitor placed within 5 mm of the pin, plus a 1 uF to 10 uF bulk capacitor for noisy supply environments. The 2.048V internal reference requires a 0.1 uF bypass on the REF pin. Estimated: with all 4 channels active at 94 ksps, average current is approximately 1.5 mA; with AutoShutdown enabled and 1 ksps sample rate, average current drops below 100 uA. Use software-controlled acquisition to minimize active-time power.
Use a star-ground topology with separate analog (AGND) and digital (DGND) return paths tied at a single point near the AVDD bypass capacitor. The SOT-23-8 package has a thermal resistance of approximately 170 C/W; ensure the analog input traces are kept short and shielded by ground pours to minimize digital switching noise coupling. Place the REF bypass capacitor directly across pin 5 (GND) and pin 6 (REF).
Do not apply analog input voltages beyond AVDD or below GND, as the input ESD diodes will conduct and potentially damage the device. When using the internal 2.048V reference, ensure no DC current is drawn from the REF pin; high source impedance on the analog inputs degrades acquisition accuracy. Bipolar mode requires the SETUP register bit REF=0 (external reference) and the BIP bit = 1. Do not exceed the I2C maximum clock frequency for the selected speed mode (400 kHz Fast, 1.7 MHz High-Speed).
Thông tin tuân thủ
RoHS and REACH compliant per Maxim/Analog Devices product page. Not AEC-Q100 qualified - not suitable for automotive safety-critical applications. Lead-free (Pb-free) per MSL1 rating.
