MAX1204ACPP - 10-Bit 8-CH 133kSPS 5V SAR ADC | Maxim Integrated
MPN: MAX1204ACPP ✗ Cuối đờiMAX1204ACPP Tóm tắt
A SAR ADC is a type of data converter that uses a binary-search algorithm against an internal precision DAC to digitize an analog input one bit at a time per clock cycle. The SAR architecture sits within the broader hierarchy of analog-to-digital converters -> data converters -> signal-chain ICs -> mixed-signal semiconductors, offering an excellent trade-off between sampling speed (here up to 133 kSPS), resolution (10 bits), deterministic latency, and low power consumption. Mixed +5V/+3V supply compatibility makes the MAX1204ACPP particularly useful as a bridge between legacy analog front ends and modern low-voltage microcontrollers or ASICs.
Key features include 8 analog input channels (single-ended or differential), an SPI/QSPI/MICROWIRE-compatible serial interface, an integrated track-and-hold with 1:1 MUX:S/H ratio, and a +5V analog supply with a separate +3V digital for the digital interface (allowing direct connection to 3V logic without level shifters). The sampling rate of 133 kSPS supports general-purpose data acquisition and process control loops, while the SAR architecture guarantees no pipeline delay so the device can settle and convert within a single acquisition window.
Typical applications include portable and battery-powered data loggers, process-control analog front ends, multichannel sensor reading modules (thermocouples, RTDs, strain gauges via signal conditioning), and industrial instrumentation where 10-bit resolution is sufficient. The mixed-suprail capability eliminates external level-shifters when interfacing to 3.3V MCUs.
When designing with this part, place 0.1 µF ceramic bypass capacitors close to both the +5V (VDD) and +3V (VL) supply pins and reference pin, and keep the analog inputs away from fast digital traces to preserve the 10-bit noise floor. Because the SAR architecture draws current in bursts, ensure the reference source has low output impedance at the conversion clock frequency to avoid gain error.
This page synthesizes distributor pricing, drop-in alternatives (including -A/-B grade and -I temperature variants), and practical layout notes not collected in the manufacturer datasheet PDF alone.
Bộ thay thế dễ dàng lắp đặt cho MAX1204ACPP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX1204ACPP (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Resolution.
MAX1204BCPP+
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX1204BEPP+
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX1204BCPP
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX1202ACAP
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX1204AEPP
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MAX1204ACPP Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 10 bit |
| Number of Channels | 8 |
| Tỷ lệ lấy mẫu | 133 kSPS |
| Architecture | SAR (Successive Approximation) |
| Input Type | Single-Ended, Differential |
| Analog Supply Voltage (VDD) | +5 V |
| Digital Interface Supply (VL) | +3 V |
| Data Interface | SPI / QSPI / MICROWIRE-compatible serial |
| MUX:S/H:ADC Ratio | 1:1 |
| Number of ADC Converters | 1 |
| Input Configuration | MUX-S/H-ADC |
| Khoảng nhiệt độ hoạt động | 0 °C to +70 °C (commercial, A grade) |
| Hộp | 20-pin PDIP (through-hole) |
| Package Code | DIP-20 |
| Kiểu lắp đặt | Through-Hole |
Cấu hình chân MAX1204ACPP
| Chân 1 | AIN0 — Analog Input Channel 0 |
| Chân 2 | AIN1 — Analog Input Channel 1 |
| Chân 3 | AIN2 — Analog Input Channel 2 |
| Chân 4 | AIN3 — Analog Input Channel 3 |
| Chân 5 | AIN4 — Analog Input Channel 4 |
| Chân 6 | AIN5 — Analog Input Channel 5 |
| Chân 7 | AIN6 — Analog Input Channel 6 |
| Chân 8 | AIN7 — Analog Input Channel 7 |
| Chân 9 | AGND — Analog Ground |
| Chân 10 | REF — Reference Voltage Input |
| Chân 11 | VDD — +5 V Analog Supply |
| Chân 12 | SHDN — Shutdown (active low) |
| Chân 13 | VL — +3 V Digital Interface Supply |
| Chân 14 | DGND — Digital Ground |
| Chân 15 | DOUT — Serial Data Output |
| Chân 16 | SCLK — Serial Clock Input |
| Chân 17 | CS — Chip Select (active low) |
| Chân 18 | NC — Not connected (per datasheet) |
| Chân 19 | NC — Not connected (per datasheet) |
| Chân 20 | NC — Not connected (per datasheet) |
Ứng dụng tiêu biểu
MAX1204ACPP phù hợp cho 6 Áp dụngs: Portable Data Acquisition Systems, Industrial Process Control Analog Front Ends, Multichannel Sensor Reading Modules, Battery-Powered Instrumentation, Legacy 5V Analog to 3V Digital Bridge, Test & Measurement Front Panels.
Portable Data Acquisition Systems
The MAX1204ACPP's 133 kSPS throughput and 8 single-ended/differential input channels make it well-suited for portable multi-channel data loggers where the +5 V analog / +3 V digital split rail lets the analog signal chain run at full ±5 V swing while the host MCU runs at 3.3 V. Place 0.1 µF ceramic bypass capacitors on both VDD and VL, route analog inputs away from the SPI clock trace, and buffer the reference pin with a low-impedance op-amp to preserve 10-bit noise floor. Unlike higher-resolution 12-/14-bit SARs, the 10-bit core delivers adequate dynamic range for general sensor scanning at lower BOM cost.
Được đề xuất
Industrial Process Control Analog Front Ends
In a 4-20 mA loop-powered process-control analog front end, the MAX1204ACPP digitizes up to 8 sensor channels (thermocouples, RTDs, pressure transducers) through external signal conditioning. The SAR architecture offers zero pipeline delay, which simplifies deterministic scanning loops in PLC modules. According to the Maxim datasheet, the integrated analog multiplexer reduces external component count versus discrete solutions. The +3 V VL rail lets a 3.3 V ARM Cortex-M host read conversions directly via SPI, eliminating level-shifters in compact DIN-rail modules.
Được đề xuất
Multichannel Sensor Reading Modules
The MAX1204ACPP supports up to 8 sensor inputs in a single 20-pin PDIP, making it ideal for compact sensor-hub modules reading strain gauges, thermistors, or photodiodes with external transimpedance amplifiers. The single-ended or differential input configuration allows 4 true-differential channels for bridge-type sensors, doubling the effective measurement density versus single-ended-only parts. The 133 kSPS sampling rate is sufficient for vibration or temperature scanning at sub-kHz rates. According to Maxim datasheet figures, the 10-bit resolution maps to ~5 mV LSB on a 5 V full-scale input.
Được đề xuất
Battery-Powered Instrumentation
The MAX1204ACPP fits low-power battery-powered instrumentation where 10-bit resolution is acceptable and the dual +5 V analog / +3 V digital supply topology is required for sensor excitation rails. The SAR core only draws current during active conversion, leaving quiescent consumption low between scans. The +3 V VL pin can be tied to the host MCU's 3.3 V rail, simplifying power-tree design. According to Maxim datasheet characteristics, the shutdown pin (SHDN) further reduces current draw to microampere levels between conversion bursts, extending battery life in duty-cycled designs.
Được đề xuất
Legacy 5V Analog to 3V Digital Bridge
The MAX1204ACPP's headline role is bridging +5 V analog signals to +3 V digital logic without external level shifters. This dual-supply SAR is designed into mixed-voltage systems where analog signal chains (op-amps, sensors) still operate on ±5 V or 0-5 V rails while the host microcontroller has migrated to 3.3 V. The VL pin accepts +2.7 V to +3.6 V, supporting a wide range of 3 V logic families. According to Maxim datasheet, this eliminates BOM cost and PCB area compared to discrete resistor-divider level-shifters.
Được đề xuất
Test & Measurement Front Panels
Benchtop test equipment and lab instrumentation benefit from the MAX1204ACPP's 8-channel input multiplexer and SAR deterministic latency. Scanned digitizers, oscilloscope front-end digitizers for slow channels, and programmable voltage reference modules all leverage the +5 V analog tolerance and direct 3 V host interface. The PDIP-20 through-hole package is also useful for prototype and breadboard designs where socketed parts speed up bench iteration. According to Maxim datasheet, the SPI interface allows daisy-chaining multiple MAX1204 parts for >8-channel systems.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX1204ACPP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX1204BCPP+ | MAX1204BEPP+ | MAX1204BCPP | MAX1202ACAP | MAX1204AEPP |
|---|---|---|---|---|---|---|
| Package | PDIP-20 | PDIP-20 - same | PDIP-20 - same | PDIP-20 - same | SSOP-20 - different package | PDIP-20 - same |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Analog Supply (VDD) | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Digital Interface Supply (VL) | +3 V | +3 V | +3 V | +3 V | +3 V | +3 V |
Bảo phân biệt quan trọng
- Mixed +5 V analog / +3 V digital dual supply on a single die (vsMAX1204BEPP+ (B grade))
- 8-channel integrated analog multiplexer with single-ended or differential mode (vsDiscrete 8-channel MUX + standalone ADC)
- SAR architecture with deterministic zero pipeline delay (vsPipelined 10-bit ADCs)
Ghi chú thiết kế
The MAX1204ACPP has two supply rails: VDD (+5 V analog) and VL (+3 V digital). Place a 0.1 µF ceramic bypass capacitor as close as possible to each supply pin, with a 10 µF tantalum or aluminum bulk capacitor on VDD. The VL pin can be sourced directly from the host MCU's 3.3 V regulator rail, eliminating a separate LDO. According to the Maxim datasheet, the VL range is +2.7 V to +3.6 V, supporting most 3.3 V microcontrollers without level-shifters.
Route analog input traces (AIN0–AIN7) and the REF pin trace away from the SPI digital lines (SCLK, DOUT, CS) on the PCB to prevent digital coupling into the analog frontend. Use a ground plane under the analog section and stitch the analog ground (AGND) to digital ground (DGND) at a single point near the ADC. This star-ground technique preserves the 10-bit noise floor by preventing return-current noise from digital switching on the SPI bus.
Do not leave the REF pin floating — it requires a stable low-impedance reference voltage (typically +5 V from VDD through a buffer or external reference IC). A high-impedance reference source will cause gain error and degraded linearity as the SAR DAC draws burst current during conversion. Also, the SHDN pin is active-low; tie it to VL through a 100 kΩ pull-up if shutdown control is not used, otherwise the device may power up in shutdown state.
Thông tin tuân thủ
RoHS and lead-free status not confirmed in verified web data. Part is no longer in active production per Maxim Integrated product lifecycle. AEC-Q100 not applicable — this is a commercial/industrial grade ADC, not an automotive qualified part.
