MAX3490ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver
MPN: MAX3490ESA+ ✓ Hoạt độngMAX3490ESA+ Tóm tắt
An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into differential signals for reliable communication over wired networks. In this product category, the transmitter drives a differential bus, while the receiver converts the differential bus voltage back into a logic-level signal. RS-422 commonly supports point-to-point communication, while RS-485 supports multipoint bus arrangements. The MAX3490ESA+ combines these functions in one package, reducing the number of external interface components.
The verified listing identifies the MAX3490 family as 3.3V, low-power transceivers for RS-485 and RS-422 communication. The MAX3490 device is listed by Analog Devices as a 3.3V-powered, 10Mbps, slew-rate-limited, true RS-485/RS-422 transceiver. The + suffix denotes the lead-free ordering configuration commonly shown by distributors, while the exact package and suffix conventions should be confirmed against the manufacturer ordering guide before production release.
Slew-rate limiting helps control the transition speed of the driver, reducing electromagnetic interference and cable reflections associated with faster edges. This is particularly useful when the transceiver drives longer cables or imperfectly terminated buses. The 10Mbps capability supports high-speed point-to-point links, but cable length, topology, termination, grounding, and signal integrity must be evaluated as a complete system rather than treated as an isolated IC specification.
Typical applications include industrial RS-485 links, building and factory automation, data acquisition equipment, motor-control systems, security equipment, and embedded communications modules. The 3.3V supply is convenient for systems using 3.3V microcontrollers, DSPs, FPGAs, or other digital controllers. Designers should verify voltage levels, driver and receiver enable timing, bus termination, protection requirements, and operating-temperature limits against the manufacturer datasheet before release.
The primary design consideration is ensuring the transceiver operates within the electrical limits of the intended bus. Differential routing should use controlled impedance where practical, the ground reference should be maintained, and unused inputs should not be left floating. This page combines the verified manufacturer and distributor information with practical application guidance, packaging information, and engineering selection criteria for evaluating the MAX3490ESA+.
Bộ thay thế dễ dàng lắp đặt cho MAX3490ESA+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3490ESA+ (cùng hình factor và footprint) — khác nhau ở Package, REACH Status, RoHS Status, Maximum Data Rate, Supply Voltage.
MAX3490EESA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3490ESA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3490ESA/GG8
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3490ESA+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3490EESA+T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3490ESA+ Thông số kỹ thuật
| Product Type | RS-485/RS-422 transceiver |
| Điện áp cung cấp | 3.3V |
| Tốc độ dữ liệu | Up to 10Mbps |
| Driver and Receiver Count | 1 driver and 1 receiver |
| Supported Standards | RS-485 and RS-422 |
| Driver Type | Slew-rate limited |
| Interface Classification | Line transceiver |
| Hộp | 8-SOIC |
| Kiểu lắp đặt | Surface mount |
| Logic Technology | CMOS |
| Manufacturer | Maxim Integrated |
| Analog Devices Product Status | PRODUCTION |
| Operating Voltage | 3.3V powered |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| Automotive Qualification | unknown |
Hướng dẫn cấu hình chân MAX3490ESA+ 8-soic
Cấu hình chân cho MAX3490ESA+ (8-soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3490ESA+.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3490ESA+ phù hợp cho 6 Áp dụngs: Industrial RS-485 Automation Bus, Building Automation Controller, Data Acquisition Equipment, Motor Control and Condition Monitoring, Security and Access-Control Equipment, Embedded Communication Module.
Industrial RS-485 Automation Bus
The MAX3490ESA+ fits industrial automation links that require a 3.3V differential transceiver with operation up to 10Mbps. Place it between a 3.3V controller and a field bus, then route the differential pair away from switching nodes and maintain a nearby ground reference. The slew-rate-limited driver can reduce EMI and reflections, but the final cable length, topology, and termination must be validated in the deployed environment.
Được đề xuất
Building Automation Controller
Use the MAX3490ESA+ in a building-control node that communicates with sensors, actuators, or remote I/O over a wired differential bus. Its 3.3V supply is compatible with many embedded controllers, while the 8-SOIC package supports compact surface-mount layouts. Keep the transceiver close to the connector, use a controlled ground path, and confirm that the intended RS-485 topology and cable loading are supported.
Được đề xuất
Data Acquisition Equipment
The MAX3490ESA+ is suitable for connecting a measurement instrument to an external controller over a robust differential interface. Its 3.3V operation can simplify power design around low-voltage controllers, while the driver and receiver are integrated in one package. For accurate measurement systems, separate sensitive analog routing from the bus, use controlled-impedance traces, and verify common-mode and grounding requirements against the complete system specification.
Được đề xuất
Motor Control and Condition Monitoring
The MAX3490ESA+ can provide a wired diagnostic link between a motor controller and a monitoring unit. A differential bus is useful where ground offsets or noise make single-ended communication less reliable. Keep the transceiver and protection network close to the cable entry, maintain a controlled return path, and use the 10Mbps rating as a maximum device capability rather than assuming it is valid for every motor cable or environmental condition.
Được đề xuất
Security and Access-Control Equipment
The MAX3490ESA+ can support a low-voltage wired communication path in access-control panels, card readers, or alarm equipment. Integrate the transceiver near the external connector and provide ESD or surge protection appropriate to the installation environment. The 3.3V supply helps reduce system-level power complexity, while the differential interface can improve noise immunity. Confirm enclosure grounding, cable routing, and field-bus loading before production deployment.
Được đề xuất
Embedded Communication Module
The MAX3490ESA+ is appropriate for an embedded module that bridges a low-voltage digital controller to an RS-485 or RS-422 physical layer. Its integrated driver and receiver reduce the number of discrete interface functions required around the controller. Use short, symmetric differential traces, provide the required bypass and protection components, and verify that the module's bus configuration supports the intended number of nodes and cable length.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3490ESA+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3490EESA | MAX3490ESA | MAX3490ESA/GG8 | MAX3490ESA+T | MAX3490EESA+T |
|---|---|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
Bảo phân biệt quan trọng
- 3.3V operation supports low-voltage embedded interfaces (vsMAX3490EESA)
- Integrated one-driver, one-receiver interface (vsMAX3490ESA)
- Slew-rate-limited operation for wired communication (vsMAX3490ESA+T)
Ghi chú thiết kế
Route the RS-485 or RS-422 driver and receiver as a close, symmetric differential pair with a continuous ground reference. Place the transceiver near the connector and provide local bypass capacitance according to the manufacturer guidance. Keep switching regulators, high-current return paths, and clocks away from the communication pair because their edge energy can appear as common-mode noise even when the differential receiver is correctly terminated.
The MAX3490 is identified as slew-rate limited, which helps reduce electromagnetic interference and reflections from faster cable edges. That benefit does not eliminate the need to validate cable length, topology, termination, and receiver loading. For a production design, test the intended cable and connector configuration, observe differential and common-mode waveforms, and confirm that the selected baud rate remains reliable under worst-case noise and bus loading.
Do not assume that a 10Mbps device rating guarantees a 10Mbps link over every cable. Long cables, star topologies, missing termination, incorrect grounding, excessive node count, and unprotected connectors can reduce reliability. Confirm the exact MAX3490ESA+ pinout and ordering suffix from the manufacturer datasheet, and validate enable sequencing so the receiver or driver is not driven during an unintended bus state.
Thông tin tuân thủ
The supplied verified data does not explicitly state compliance status for MAX3490ESA+. Do not infer RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance from the ordering suffix or distributor listing alone.
