MC13783JVK5 - Atlas 3G PMIC + Audio 247-MAPBGA | NXP
MPN: MC13783JVK5 ✗ Cuối đờiMC13783JVK5 Tóm tắt
What is a PMIC? A Power Management Integrated Circuit (PMIC) consolidates multiple voltage regulators, battery charging circuits, and power-sequencing logic into a single silicon die. Within the broader taxonomy, the MC13783 sits at the intersection of power management IC -> multi-channel PMU -> application-specific PMIC for mobile handsets. Companion audio functions are integrated to eliminate a separate codec IC and shorten the analog signal path between baseband, microphone, earpiece and headphone amplifier outputs.
Key features of the MC13783JVK5 include up to 13 switch-mode and linear regulators covering VCORE, VDIG, VRF, VMEM, VSIM, VUSB, VAUDIO and similar rails; a USB-OTG transceiver; a stereo Class G headphone driver; integrated Li-Ion / Li-Poly charging with JEITA thermal regulation; programmable LED backlight boost with PWM; and a 10-bit general-purpose ADC for battery monitoring, thermistors and accessory detection.
Architecturally, the device combines a smart power mux that arbitrates USB, wall-adapter and battery inputs, a multi-rail DC-DC controller, a Class-G audio output stage, and an analog audio codec path with sidetone. All rails are sequenced under SPI/I2C control by the baseband processor, allowing the host to set VCORE voltage for DVFS power saving.
Typical applications include GSM/GPRS/EDGE/UMTS feature phones, low-end smartphones, portable media players, and handheld GPS navigators. Industrial variants of the same silicon also appear in ruggedized mobile terminals. According to the NXP/Freescale MC13783 datasheet, the part is qualified for handset operating profiles.
A critical design consideration is the PCB floorplan. The 247-MAPBGA at 10x10 mm requires laser-via or microvia build-up stackups; escape routing on internal layers must keep the audio ground plane contiguous to avoid ground bounce coupling into the microphone bias path. Decouple each regulator output with a 10uF X5R plus a 0.1uF X7R placed within 2 mm of the corresponding BGA ball.
This page synthesizes distributor pricing, drop-in alternatives, MAPBGA ball-mapping notes and design cautions that are not aggregated in any single manufacturer document.
Bộ thay thế dễ dàng lắp đặt cho MC13783JVK5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MC13783JVK5R2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC13783JVK5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC13783JVK5 Tỷ lệ tối đa & tính chất điện
| Manufacturer | NXP Semiconductors (Freescale) |
| Chức năng | Handheld/Mobile Devices PMIC with integrated audio codec |
| Part Family | Atlas 3G (MC13783) |
| Number of Regulated Outputs | Up to 13 |
| Regulator Types | Buck, boost, bypass and linear LDO |
| Battery Charger | Integrated Li-Ion/Li-Poly with JEITA |
| Audio Interface | Stereo codec + sidetone |
| Headphone Driver | Class-G stereo |
| Backlight Driver | Programmable LED boost with PWM |
| ADC | 10-bit SAR general purpose |
| Control Interface | SPI / I2C |
| USB | USB-OTG transceiver |
| Supported Cellular | GSM / GPRS / EDGE / UMTS |
| Hộp | 247-MAPBGA (10x10 mm) |
| Số chân | 247 |
| Package Code | FBGA / MAPBGA |
| Kiểu lắp đặt | Surface Mount |
| Operating Temperature Grade | Other (per distributor data) |
Hướng dẫn cấu hình chân MC13783JVK5 fbga / mapbga
Cấu hình chân cho MC13783JVK5 (fbga / mapbga gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho MC13783JVK5.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC13783JVK5 phù hợp cho 6 Áp dụngs: GSM/GPRS Feature Phone PMU + Audio, Low-End Smartphone / UMTS Handset, Portable Media Player (PMP) Power + Audio, Handheld GPS / Navigator Terminal, Industrial Ruggedized Mobile Terminal, Wireless POS / Handheld Payment Terminal.
GSM/GPRS Feature Phone PMU + Audio
The MC13783JVK5 is purpose-built for GSM/GPRS/EDGE/UMTS handsets, integrating every power rail (VCORE, VDIG, VRF, VMEM, VUSB, VSIM, VAUDIO) with a stereo audio codec in one 247-MAPBGA. Why choose this IC: 13 rails from a single host SPI/I2C bus eliminate 3-5 separate regulator ICs and shorten the analog audio path between microphone, baseband and Class-G headphone driver. Estimated typical application: VCORE 1.2V/500mA buck for baseband, VDIG 1.8V LDO, VAUDIO 2.5V LDO with <30 uVrms noise for the codec DAC reference, plus JEITA-controlled Li-Ion charging at the wall-adapter input. The 10-bit ADC reads battery thermistor and accessory ID. Compared to a discrete regulator stack, total BOM drops by ~40% and standby quiescent drops by ~3-5 mA - directly improving talk time. Drop-in same-package variants: MC13783JVK5R2 (R2 = tape-and-reel packing code only). Companion components: baseband chipset, RF PA supply sequencer.
Được đề xuất
Low-End Smartphone / UMTS Handset
For entry-level UMTS smartphones that need higher audio fidelity than a discrete codec, the MC13783JVK5 provides a complete PMU + stereo headphone amp. Why it fits: integrated Class-G driver delivers up to 35 mW per channel into 32 ohm headphones with high efficiency, while the bundled codec supports microphone sidetone. Estimated typical application: between baseband SoC and the 3.7 V Li-Poly cell; power-path arbitration among wall adapter, USB and battery; VCORE bucks at 1.2-1.4 V at 600-800 mA peak. PSRR of ~60 dB keeps audio DAC noise well below the GSM transmit floor. Compared to using a discrete LDO + codec, the integrated Class-G reduces headphone amp quiescent by ~50% and eliminates 4-5 caps. This same-package variant: MC13783JVK5R2.
Được đề xuất
Portable Media Player (PMP) Power + Audio
Portable media players need efficient buck/boost rails and high-quality headphone audio. The MC13783JVK5's 13 regulators cover system, memory, RF, audio and USB rails from a single Li-Poly cell, while the integrated stereo Class-G headphone driver replaces a separate audio amp IC. Estimated typical use: VMMC track 2.85V for SD card, VUSB 5V boost for OTG host mode, VAUDIO 2.5V LDO with low PSRR ripple for the DAC reference. The 10-bit ADC monitors battery thermistor and 5-point charge temperature window per JEITA. Versus a discrete regulator design, this part reduces the power section PCB area by ~60% and cuts idle current by ~3-4 mA - extending audio playback time. The same-package reel variant MC13783JVK5R2 shares identical ball map for high-volume SMT.
Được đề xuất
Handheld GPS / Navigator Terminal
Handheld GPS and personal navigator devices combine a baseband SoC, RF receiver, display backlight, Li-Ion cell and audio prompts. The MC13783JVK5 provides the power tree, integrated backlight LED boost with PWM dimming, and mono/stereo audio for navigation prompts in one IC. Estimated typical use: VRF 2.85V/300 mA for GPS LNA, VDIG 1.8V for baseband, VMEM 2.85V for SDRAM, plus a programmable-current LED boost (up to 40 mA) to drive 2-4 series white LEDs for the LCD backlight with a single I2C command. Audio sidetone supports voice prompts through the Class-G headphone driver. Compared to separate PMU + LED driver ICs, this single-chip solution saves ~50 mm^2 of PCB area - enabling slimmer, lighter handheld products. Same-package companion: MC13783JVK5R2.
Được đề xuất
Industrial Ruggedized Mobile Terminal
Ruggedized handheld terminals (barcode scanners, push-to-talk radios, field service tablets) reuse handset-derived PMICs because of their proven regulator count and integrated audio. The MC13783JVK5 supports GSM/GPRS modems, Li-Ion charging at industrial temperatures, and an audio path loud enough for two-way radio. Estimated typical use: VBAT 3.0-4.2 V direct from a 2200-3000 mAh Li-Ion pack; charge current 500 mA-1 A programmed via I2C; full charge management with JEITA; VCORE 1.3 V buck for the application processor; VDIG 1.8 V LDO for I/O. The integrated Class-G headphone driver provides >35 mW into 32 ohm - sufficient for speaker-mode prompts. Compared to designing a discrete regulator stack, using this IC reduces validation time dramatically because every rail is qualified to handset reliability standards. Same-package drop-in: MC13783JVK5R2.
Được đề xuất
Wireless POS / Handheld Payment Terminal
Wireless point-of-sale terminals, taxi meters and portable ticketing devices integrate a cellular modem, secure keypad, audio prompt speaker and a rechargeable Li-Ion/Li-Poly cell. The MC13783JVK5 supplies all rails and provides voice/audio for transaction prompts. Estimated typical use: 3.7 V Li-Poly battery with USB-OTG charging; VDIG 1.8 V for secure element; VMEM 2.85 V for SDRAM; VAUDIO low-noise LDO for DAC reference; audio codec path drives a 32 ohm speaker for transaction beeps and voice prompts. The Class-G headphone driver also supports an operator headset for PIN entry audio. Compared to a discrete PMU, this IC integrates the audio block - cutting the analog signal chain by ~30 mm and avoiding ground-loop hum between power and audio grounds. Same-package companion: MC13783JVK5R2.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC13783JVK5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC13783JVK5R2 |
|---|---|---|
| Package | 247-MAPBGA (10x10 mm) | 247-MAPBGA (10x10 mm) - identical |
| Brand | NXP Semiconductors | NXP Semiconductors - same |
| Pin Count | 247 balls | 247 balls - identical |
| Lifecycle Status | Obsolete / Legacy | Obsolete / Legacy - same |
| Regulator Channels | 13 | 13 - identical |
| Audio Codec | Integrated stereo + sidetone | Integrated stereo + sidetone - identical |
| USB | USB-OTG transceiver | USB-OTG - identical |
| Packaging Form | Tray (260 pcs) | Tape & Reel (5000 pcs) - reel packing code |
Bảo phân biệt quan trọng
- Single-chip integration of PMU + stereo audio codec (vsDiscrete regulator stack + separate audio codec)
- 13 voltage rails from one host bus (vsMC13892 (4-channel Atlas 4G))
- Integrated Class-G headphone driver (vsExternal Class-D headphone amp)
Ghi chú thiết kế
The 247-MAPBGA at 0.5 mm ball pitch requires a microvia or laser-via PCB stackup. Escape route all balls through the top two layers using dog-bone fan-out or via-in-pad. Place a contiguous GND pour on layer 2 under the BGA to provide a low-impedance return path for the audio codec and to absorb switching noise from the buck converters. Estimated minimum stackup: 4-layer 1+2+1 with 0.1 mm laser vias.
Do not exceed 260 C peak reflow temperature for more than 30 seconds - the MAPBGA is Pb-free but the moisture sensitivity level (MSL) is typically 3. Bake at 125 C for 12 hours before assembly if the package has been open >168 hours. Always confirm MSL on the NXP/Freescale datasheet before running the reflow profile in volume.
Keep the microphone bias trace short and guarded by GND on both sides. The internal codec's sidetone gain is sensitive to ground bounce. Estimated: maintain 0.5 mm spacing from any switching-node trace (SW node of any buck regulator) and place a ferrite bead in series with the microphone bias if audible hum is observed during GSM transmit bursts.
Thông tin tuân thủ
Lead-free (Pb-free) terminal finish per NXP/Freescale product specification; RoHS compliant. REACH and halogen-free status should be confirmed with NXP for the latest supplier statement. AEC-Q100 automotive qualification is not applicable - this is a consumer/handset PMIC.
