MC33560DW - 3V/5V Smart Card Interface IC | onsemi
MPN: MC33560DW ✓ Hoạt độngMC33560DW Tóm tắt
A smart card interface IC is a specialized interface semiconductor used in payment terminals, access-control readers, card programmers, and embedded identification systems. It belongs to the broader hierarchy of interface ICs, specialized interface controllers, and application-specific semiconductors. The interface stage manages the card connection, signal levels, and host-side communication needed to exchange data with contact smart cards while keeping the external host controller relatively simple.
The MC33560DW supports both 3V and 5V smartcard operation, making it useful in equipment that must accommodate different card-generation and host-interface requirements. Its 20 MHz operating capability provides a defined timing foundation for the smartcard interface. The 24-pin SOIC package also supports conventional surface-mount PCB assembly, making the device practical for compact reader and coupler designs that require a conventional small-outline package rather than a large connector-oriented footprint.
Typical uses include USB smartcard readers, point-of-sale terminals, electronic access-control readers, industrial identification equipment, card readers and writers, and embedded data-capture systems. In these applications, the MC33560DW acts as the dedicated smartcard-facing IC between the card contacts and the system controller. Designers should confirm card-class support, voltage levels, clocking, and external interface requirements against the manufacturer datasheet before finalizing a system design.
A key implementation consideration is ensuring that the host-side communication logic, card power supply, reset control, and signal conditioning match the selected card standard. The SOIC footprint requires careful attention to exposed-pad-free assembly clearance, routing of clock and data signals, and grounding around the interface. Because smartcard interfaces are sensitive to timing and electrical disturbances, PCB layout and power-supply decoupling deserve verification in the final prototype.
This product page brings together the MC33560DW application context, interface considerations, package information, technical specification highlights, and sourcing guidance. It is intended to help engineers identify whether this 3V/5V smartcard interface IC fits a reader, writer, or embedded card-management design before requesting current commercial information.
Bộ thay thế dễ dàng lắp đặt cho MC33560DW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC33560DW Thông số kỹ thuật
| Product Type | Smart card reader/writer interface IC |
| Supported Supply Voltage | 3 V to 5 V |
| Interface Clock | 20 MHz |
| Power Dissipation | 220 mW |
| Hộp | 24-pin SOIC |
| Số lượng chân | 24 pins |
| Kiểu lắp đặt | Surface mount |
| Primary Application | Smart card readers and writers |
| Supported Card Types | Smart cards and memory cards |
| Host Interface | Microcontroller interface |
| Supply Configuration | 3 V / 5 V |
| Manufacturer | onsemi |
| Device Category | Interface IC |
| Tần số xung maksimum | 20 MHz |
Hướng dẫn cấu hình chân MC33560DW 24-pin soic
Cấu hình chân cho MC33560DW (24-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MC33560DW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC33560DW phù hợp cho 6 Áp dụngs: Smartcard Reader, Smartcard Writer, Point-of-Sale Terminal, Access-Control Reader, Card Coupler and Programmer, Embedded Card-Management Equipment.
Smartcard Reader
The MC33560DW fits a smartcard reader because it provides a dedicated interface between card contacts and a host controller while supporting 3 V and 5 V smartcard operation. Its 20 MHz interface clock defines the timing capability for the card-facing circuit. In a reader design, place the IC close to the smartcard connector and route the card-contact signals with short, controlled paths. The 24-pin SOIC package supports conventional surface-mount assembly while leaving the host processor responsible for application protocols, authentication exchanges, and card-specific data handling.
Được đề xuất
Smartcard Writer
The MC33560DW is suitable for smartcard writer equipment because it is expressly positioned as a smart card reader/writer interface IC. Supporting both 3 V and 5 V card environments gives designers flexibility when the reader-writer platform must handle more than one card generation. The 20 MHz clock specification supports the card-interface timing domain, while the 24-pin SOIC package simplifies assembly and PCB reuse. Firmware must still manage write commands, card authentication, data integrity, and safe transitions between sessions.
Được đề xuất
Point-of-Sale Terminal
A point-of-sale terminal can use the MC33560DW as the physical smartcard interface between an embedded host and a payment card. Its 3 V and 5 V support is relevant to modern contactless-reader ecosystems that must accommodate multiple card electrical conditions, while the 20 MHz clock supports the interface timing function. The 24-pin SOIC footprint allows the regulator to be placed near the connector and card power circuitry. Application-layer cryptography, transaction authorization, and payment workflows remain the responsibility of the terminal processor and secure hardware.
Được đề xuất
Access-Control Reader
The MC33560DW can support electronic access-control readers that read identity cards through a dedicated smartcard interface stage. The controller-side microcontroller communicates through the MC33560DW, avoiding the need to implement the complete card-contact interface in general-purpose host I/O. Operation at 3 V and 5 V provides design flexibility across credential-reader platforms, and the 20 MHz clock defines the available interface timing. Designers should verify card-class support, reset behavior, and clock requirements against the manufacturer datasheet for the exact credentials used.
Được đề xuất
Card Coupler and Programmer
The MC33560DW is appropriate for a card coupler or programmer because it is designed specifically for smart and memory card reader/writer management. The 3 V and 5 V operating choices allow the equipment platform to support different card interfaces, and the 20 MHz clock specification provides a defined interface operating point. In a coupler, the IC should be positioned close to the card socket, with clock, data, reset, power, and card-presence routing checked against the datasheet pin table. Programming protocols and erase or write controls remain firmware functions.
Được đề xuất
Embedded Card-Management Equipment
The MC33560DW is useful in embedded industrial and identity equipment that requires a card reader/writer function without exposing a full-size host computer. Its dedicated smartcard interface supports 3 V and 5 V systems, and the 20 MHz clock capability defines the interface timing foundation. The 24-pin SOIC package is useful for compact assemblies and automated manufacturing. For industrial environments, evaluate grounding, card-connector protection, power sequencing, and temperature performance against the complete system requirements rather than treating the IC in isolation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC33560DW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 24-pin SOIC |
| Brand | onsemi |
| Product Type | Smart card reader/writer interface IC |
| Supported Voltage | 3 V / 5 V |
| Interface Clock | 20 MHz |
| Power Dissipation | 220 mW |
| Number of Pins | 24 pins |
| Host Connection | Microcontroller interface |
Bảo phân biệt quan trọng
- Supports two smartcard operating voltages (vsNo verified drop-in alternative was identified)
- Provides a defined high-speed interface clock (vsNo verified drop-in alternative was identified)
- Combines reader/writer positioning with a conventional SOIC footprint (vsNo verified drop-in alternative was identified)
Ghi chú thiết kế
Place the MC33560DW close to the smartcard connector so the card-contact signals remain short. Route the clock and data nets away from noisy switching nodes, preserve the intended ground reference, and avoid long stubs. Use the manufacturer pin table to assign the 24 SOIC leads and verify every connection against the schematic before fabrication.
Design the card and interface supplies for the voltage conditions required by the target card standard. Keep the 3 V and 5 V operating modes in mind when defining level-shifting or power-control circuitry. Decouple the IC supply pins locally and verify startup, reset, and card-present behavior with the complete host firmware rather than testing power sequencing in isolation.
The specified 20 MHz interface clock makes clock routing and return-path continuity important. Use a short clock path, maintain a continuous reference plane beneath the routed signals, and avoid unnecessary vias or right-angle transitions. Check rise time, loading, and timing margins against the complete host-controller and card-interface arrangement.
Do not treat the 24-pin SOIC outline as sufficient evidence of interchangeability. A replacement must match the MC33560DW pin assignments, supply levels, clock behavior, timing characteristics, and card-support requirements. Review reset sequencing, card-present detection, and communication protocol ownership during schematic review to prevent integration errors.
Thông tin tuân thủ
No specific compliance declaration is identified for MC33560DW in the manufacturer or distributor records reviewed on 2026-11-11.