MC34018DW - Voice-Switched Speakerphone IC | NXP | 28-SOIC
MPN: MC34018DW ✗ Cuối đờiMC34018DW Tóm tắt
A voice-switched speakerphone circuit is an analog telephone interface that activates the microphone during speech and transfers audio to the loudspeaker when the remote party talks. It prevents local transmitted speech from being reproduced through the speaker, reducing acoustic feedback while allowing hands-free conversation. In the system hierarchy, the MC34018DW is a telecom interface IC, a voice-network analog front end, and an integrated application-specific semiconductor.
The MC34018DW integrates the switching and speech-network functions needed for a compact telephone speakerphone. Its principal characteristics include one internal circuit, a 5.4 V nominal supply, approximately 9 mA supply current, and an operating-temperature range of -20 °C to +60 °C. These ratings identify the part as a commercial-grade, legacy line interface intended for telephone handsets, analog desk phones, and related communications equipment.
The 28-pin SOIC construction supports conventional surface-mount assembly while providing separate connections for microphone, speaker, line, and control functions. The commercial temperature range accommodates standard indoor telecom equipment but not extended automotive or industrial environments. The reported 100 mW dissipation is modest, making copper heat spreading generally less important than correct analog routing and protection around the telephone line.
Typical uses include analog corded telephones, speakerphone terminals, telephone answering equipment, and legacy two-wire line interfaces. Because the MC34018DW is obsolete, new designs should normally evaluate current speech-processing or telephone-interface ICs instead of creating a new dependency on this legacy device. Existing production equipment can benefit from careful footprint, pin-function, and lifecycle review before selecting a replacement.
For a drop-in substitution, engineers must verify the complete 28-pin schematic, microphone and speaker biasing, line-interface topology, supply tolerances, control thresholds, and thermal conditions. A similar speech-network function alone does not establish pin-to-pin compatibility. The manufacturer datasheet remains the controlling reference for connection details and application limits.
This page organizes the documented MC34018DW characteristics, practical telecom use cases, sourcing information, and replacement-selection guidance. It also distinguishes verified drop-in alternatives from merely related voice-processing parts so engineers can avoid PCB respin or unexpected control-interface changes.
Bộ thay thế dễ dàng lắp đặt cho MC34018DW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC34018DW Tỷ lệ tối đa & tính chất điện
| Product Type | Voice-switched speakerphone circuit |
| Danh mục | Telecom interface IC |
| Nominal Supply Voltage | 5.4 V |
| Điện áp cung cấp | 9 mA |
| Power Dissipation | 100 mW |
| Speech Network Standard | 35 dB |
| Number of Circuits | 1 circuit |
| Nhiệt độ hoạt động | -20 °C to +60 °C |
| Temperature Grade | Commercial |
| Hộp | 28-pin SOIC, 7.50 mm width |
| Package Code | SOP |
| Terminal Count | 28 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Kiểu lắp đặt | Surface mount |
| Trạng thái vòng đời | Obsolete |
Hướng dẫn cấu hình chân MC34018DW rectangular
Cấu hình chân cho MC34018DW (rectangular gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MC34018DW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC34018DW phù hợp cho 6 Áp dụngs: Legacy Corded Telephone, Analog Speakerphone Terminal, Telephone Answering Equipment, Two-Wire Telephone Interface, Hands-Free Office Phone, Telephone Equipment Maintenance.
Legacy Corded Telephone
The MC34018DW fits an analog corded telephone in which local and remote speech must be separated to prevent acoustic feedback. Place the device in the handset or base telephone electronics, connect the microphone and speaker paths according to the manufacturer application circuit, and provide the documented 5.4 V supply. Its 9 mA supply current and 100 mW dissipation suit compact telephone electronics, while the -20 °C to +60 °C range suits ordinary indoor commercial equipment. Because the device is obsolete, it is most appropriate for repairing or maintaining an existing design whose external network and speaker impedances already match the original reference circuit.
Được đề xuất
Analog Speakerphone Terminal
Use the MC34018DW when designing or maintaining a compact analog speakerphone terminal with a nominal 5.4 V supply. The IC controls the transition between transmit and receive audio, reducing the possibility that local speech is reproduced in the loudspeaker. Its 28-pin SOIC package provides separate routing for line, microphone, speaker, control, and supply functions, allowing a conventional surface-mount layout. The 35 dB speech-network specification is the principal acoustic-system figure engineers should evaluate against required intelligibility and loop gain. Verify the recommended microphone, speaker, and line-network component values before adapting the circuit.
Được đề xuất
Telephone Answering Equipment
The MC34018DW can support the analog speech path in legacy telephone answering equipment where an off-hook speakerphone function is required. Its 9 mA supply current and low 100 mW dissipation suit compact telephone electronics, while the 28-pin SOIC package simplifies board-level integration. The design must still account for the telephone line network, speech coupling, microphone bias, and speaker impedance because those external networks determine acoustic performance. Use the manufacturer application schematic as the starting point and confirm the device's obsolete status before committing to a new production run.
Được đề xuất
Two-Wire Telephone Interface
MC34018DW is applicable to a legacy two-wire telephone interface when the design requires integrated voice switching rather than a discrete microphone/speaker changeover circuit. The IC operates from a nominal 5.4 V supply and is intended for analog line-terminal conditions within its specified commercial temperature range. Implement the recommended line-network components and verify transient protection so that switching currents and telephone-line surges do not exceed the manufacturer's limits. Because no verified 28-pin drop-in substitute was identified, a new two-wire product should normally use a currently supported interface IC and undergo acoustic and electrical requalification.
Được đề xuất
Hands-Free Office Phone
The MC34018DW can support the speakerphone section of a legacy hands-free office telephone with one voice-switching circuit. Its compact surface-mount package and modest 9 mA supply requirement are useful in desktop telephone bases where space and power are constrained. Designers should pay particular attention to acoustic echo, speaker-to-microphone coupling, and the recommended external resistors and capacitors because the IC alone does not determine conversation quality. The commercial -20 °C to +60 °C range covers typical office conditions. For current production, assess lifecycle risk and consider a supported telephone-interface IC before creating new demand.
Được đề xuất
Telephone Equipment Maintenance
The MC34018DW is most practical as a maintenance component for a populated legacy PCB whose schematic confirms the exact 28-pin MC34018DW connection. It can support continuity-focused repairs without redesigning the telephone network, microphone amplifier, speaker path, or control circuitry. Before ordering, compare the complete board schematic with the manufacturer pin description and inspect the package markings, because MC34017-family devices may have related functions but different packages. Request traceability and date-code details for legacy production continuity, and verify the replacement part through an engineering-equivalent qualification process.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC34018DW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 28-pin SOIC |
| Brand | NXP Semiconductors |
| Function | Voice-switched speakerphone circuit |
| Number of Circuits | 1 circuit |
| Nominal Supply Voltage | 5.4 V |
| Supply Current | 9 mA |
| Power Dissipation | 100 mW |
| Speech Network Standard | 35 dB |
| Operating Temperature | -20 °C to +60 °C |
| Lifecycle Status | Obsolete |
Bảo phân biệt quan trọng
- Matches a dedicated 28-pin SOIC legacy telephone design (vsMC34017A-1P)
- Provides a single voice-switched speakerphone circuit (vsMC34017A-2P)
- Matches the footprint of an existing MC34018DW assembly (vsModern telephone-interface ICs)
Ghi chú thiết kế
Do not substitute an MC34017-family circuit solely because both products implement voice switching. The MC34017A-1P is documented in a PDIP-8 package, and the MC34017A-2P is associated with a different package offering. Validate every numbered connection, microphone bias, speaker connection, control threshold, and supply requirement before considering any redesign.
Place microphone, speaker, and telephone-line connections according to the manufacturer application layout. Keep sensitive audio traces away from line transients and switching nodes, and use a compact ground return for microphone and speaker paths. Confirm the exposed package and pin numbering directly on the physical board because legacy assemblies may contain related MC340-series devices.
Power the circuit at the nominal 5.4 V condition while observing the detailed operating and absolute-maximum limits in the manufacturer datasheet. The listed supply current is 9 mA and power dissipation is 100 mW, so ordinary SOIC copper spreading should be sufficient. Validate startup, off-hook behavior, line loading, and supply ripple in the complete telephone assembly.
Estimated: using the listed 5.4 V nominal supply and 9 mA supply current, supply power is approximately 48.6 mW. This calculation is lower than the separate 100 mW dissipation rating and is not a substitute for the manufacturer's maximum rating. Use the published 100 mW figure for worst-case thermal assessment and verify the assembled board at the highest intended ambient temperature.
Thông tin tuân thủ
No definitive environmental or automotive qualification declarations were identified for MC34018DW. Its documented operating-temperature grade is commercial, but that rating does not by itself establish AEC-Q100 qualification.