MC34119D - Low-Power Class AB Audio Amplifier | NXP
MPN: MC34119D ✓ Hoạt độngMC34119D Tóm tắt
An audio amplifier is an integrated circuit that accepts a low-level analog audio signal and delivers enough current and voltage to drive a speaker or another acoustic transducer. The MC34119 belongs to the Class AB amplifier category, where the output transistors conduct during the signal cycle for improved efficiency than a continuously biased Class A design. Its telephone-oriented architecture supports portable and line-powered equipment where low supply voltage and compact implementation are important.
The verified feature set includes a shutdown function, a single mono output channel, and differential speaker outputs. Differential outputs are particularly useful in telephone and speakerphone designs because they increase output swing into a differentially connected transducer. The manufacturer datasheet also identifies a 2.0 V minimum supply, allowing operation from low-energy source rails. The Class AB output stage is intended to balance output capability against power consumption in compact audio systems.
MC34119D applications include telephone speakerphones, compact voice terminals, intercom equipment, and other low-voltage audio products. In these systems, the amplifier converts a microphone or line-level signal into a differential drive capable of energizing a small speaker. Designers should account for the external output-coupling capacitors shown in the manufacturer application circuit when connecting a speaker, and should verify the shutdown-control polarity and timing before sequencing the device.
The most important design consideration is ensuring that the supply, input signal, output network, and speaker load remain within the limits defined by the manufacturer datasheet. Because the target is a legacy low-power audio amplifier, purchasing decisions should also account for lifecycle status, stock, and long-term sourcing rather than assuming availability from an active-production family.
This page consolidates the verified package, supply-voltage, amplifier-class, shutdown, and differential-output information with practical selection guidance. It also distinguishes confirmed facts from parameters that require confirmation in the original MC34119 manufacturer datasheet, helping engineers evaluate MC34119D without relying on incomplete distributor summaries.
Bộ thay thế dễ dàng lắp đặt cho MC34119D — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC34119D Tỷ lệ tối đa & tính chất điện
| Product Type | Low-power audio amplifier integrated circuit |
| Amplifier Class | Class AB |
| Kiểu đầu ra | 1-channel mono |
| Cấu hình đầu ra | Differential speaker outputs |
| Minimum Supply Voltage | 2.0 V |
| Supply Voltage Range | 2 V to 16 V |
| Bipolar Supply Voltage Range | +/-1 V to +/-8 V |
| Shutdown Function | Yes |
| Intended Application | Telephone equipment and speakerphones |
| Hộp | 8-SOIC, 0.154 in (3.90 mm) body width |
| Alternate Package Listing | 8-TSSOP, 0.173 in (4.40 mm) body width |
| Kiểu lắp đặt | Surface mount |
| Manufacturer | NXP Semiconductors |
| Product Category | Audio amplifier IC |
Hướng dẫn cấu hình chân MC34119D 8-tssop, 0.173 in (4.40 mm) body width
Cấu hình chân cho MC34119D (8-tssop, 0.173 in (4.40 mm) body width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho MC34119D.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC34119D phù hợp cho 6 Áp dụngs: Telephone Speakerphone, Compact Voice Terminal, Intercom Station, Low-Voltage Communication Handset, Portable Voice Monitor, Voice-Enabled Control Panel.
Telephone Speakerphone
The MC34119D is well suited to a telephone speakerphone because it is a mono Class AB amplifier specified for operation from a 2.0 V minimum supply and provides differential speaker outputs. According to the MC34119 manufacturer datasheet, the differential configuration maximizes output swing at low supply voltages. The IC can drive the telephone audio path after the receive signal has been conditioned by the rest of the voice circuit. Its shutdown function can disable the amplifier during inactive intervals. The designer should reproduce the manufacturer output network, select the correct external coupling capacitors, and verify speaker loading and thermal behavior on the final PCB.
Được đề xuất
Compact Voice Terminal
MC34119D can serve as the speaker amplifier in a compact voice terminal where the available supply is limited and a mono Class AB output stage is sufficient. Its verified 2.0 V minimum operating supply supports low-energy operation, while the listed 2 V to 16 V range covers conventional low-voltage systems. The shutdown function helps avoid wasting power when the enclosure is not actively carrying a call. Because maximum output power and output-current limits were not present in the verified excerpts, the speaker impedance and continuous drive level must be checked against the manufacturer electrical characteristics before production.
Được đề xuất
Intercom Station
The MC34119D is applicable to an intercom station requiring one-way, mono speech reproduction from a low-voltage supply. Its differential speaker outputs can improve usable swing in a compact implementation, which is particularly valuable when the system operates near the 2.0 V minimum specified by the manufacturer. Shutdown support can be coordinated with the conversation-control logic so that the amplifier does not consume power while the station is idle. The design should follow the manufacturer application schematic, retain the external speaker-coupling capacitors, and verify EMI behavior around the speaker leads.
Được đề xuất
Low-Voltage Communication Handset
MC34119D is suited to the receive-audio section of a low-voltage communication handset because it combines Class AB mono amplification, differential speaker drive, and shutdown control in an 8-pin surface-mount package. According to the manufacturer datasheet, the part was intended primarily for telephone equipment, so its application circuit is aligned with voice-band communication products. The 2.0 V minimum supply can simplify integration with low-voltage system rails. Before layout release, engineers should confirm the exact package outline and pin assignment because the verified distributor results contain conflicting 8-SOIC and 8-TSSOP descriptions.
Được đề xuất
Portable Voice Monitor
MC34119D can amplify a local voice-monitoring signal in a portable device operated from a low-energy source. Its one-channel Class AB topology is appropriate when only mono monitoring audio is required, and the verified shutdown function permits the amplifier to be disabled when monitoring is inactive. Differential speaker outputs maximize swing at the low supply voltages emphasized in the manufacturer datasheet. Designers should compare the verified supply range with the battery rail, account for the external output capacitors, and validate that the selected speaker impedance remains within the device's unsupplied maximum-output-power and output-current limits.
Được đề xuất
Voice-Enabled Control Panel
The MC34119D is useful in a voice-enabled control panel that converts a mono audio signal into differential speaker drive. Its verified Class AB output stage, shutdown capability, and low 2.0 V minimum supply fit compact embedded audio systems where power efficiency and component count matter. Differential outputs can improve signal swing, but the application still requires the external coupling capacitors shown in the manufacturer circuit. Before selecting a board footprint, resolve the package discrepancy in the verified listings by checking the exact NXP outline drawing and comparing lead pitch, body dimensions, and pin numbering.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC34119D — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Package | 8-SOIC according to DigiKey; 8-TSSOP appears in another verified listing |
| Brand | NXP Semiconductors |
| Amplifier Class | Class AB |
| Channel Configuration | 1-channel mono |
| Minimum Supply Voltage | 2.0 V |
| Supply Voltage Range | 2 V to 16 V |
| Bipolar Supply Range | +/-1 V to +/-8 V |
| Output Configuration | Differential speaker outputs |
| Shutdown | Yes |
| Primary Application | Telephone equipment and speakerphones |
Bảo phân biệt quan trọng
- Telephone-specific low-voltage operation (vsMC34119P)
- Differential output swing (vsNJM2113)
- Integrated power management (vsMC34119P)
Ghi chú thiết kế
Resolve the package discrepancy before PCB layout. The verified DigiKey record identifies an 8-SOIC with a 3.90 mm body width, while another result identifies an 8-TSSOP with a 4.40 mm body width. Confirm the ordering suffix, lead pitch, body dimensions, and pin numbering against the NXP manufacturer drawing. Do not combine an SOIC footprint with a TSSOP land pattern merely because both have eight terminals.
The verified manufacturer information establishes a 2.0 V minimum supply and a 2 V to 16 V listed range. Keep the supply within the manufacturer's absolute-maximum and operating limits, and account for the voltage drop across supply decoupling components. If the circuit uses bipolar rails, verify the ±1 V to ±8 V operating range. Numerical power dissipation cannot be calculated until output power, quiescent current, and voltage-drop specifications are confirmed from the datasheet.
Do not assume that the similar MC34119P is a drop-in replacement. The supplied cross-reference results do not establish an identical package, pinout, or electrical configuration. Likewise, NJM2113 is only mentioned in an NXP community discussion and is not proven pin-compatible. A valid substitution requires the manufacturer package drawing, pin table, supply limits, shutdown logic, gain, output drive, and application circuit to be compared explicitly.
Route the input and supply connections away from the speaker outputs and keep the output-coupling capacitors close to the amplifier pins. The differential speaker architecture can reduce radiated signal if the complete output network and speaker connection are implemented as intended. Validate EMI immunity with the final enclosure, speaker cable, grounding arrangement, and telephone interface because the verified search data does not provide detailed PCB-layout or EMC test results.
Thông tin tuân thủ
The supplied verified excerpts do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. AEC-Q100 is marked not applicable because MC34119D is a telephone audio amplifier rather than an automotive-qualified device in the provided data.
